[Intel-gfx] [PATCH 3/8] drm/i915/pcode: Extend pcode functions for multiple gt's
Jani Nikula
jani.nikula at linux.intel.com
Thu Apr 14 13:28:57 UTC 2022
On Wed, 13 Apr 2022, Ashutosh Dixit <ashutosh.dixit at intel.com> wrote:
> Each gt contains an independent instance of pcode. Extend pcode functions
> to interface with pcode on different gt's. Previous (GT0) pcode read/write
> interfaces are preserved.
The big problem here is that this hard couples display code to gt code,
while we're trying hard to go the opposite direction. It doesn't matter
that the existing interfaces are preserved as wrappers when it relies on
an intel_gt being available (via i915->gt0).
Note how 'git grep intel_gt -- drivers/gpu/drm/i915/display/' matches
only 1 line.
BR,
Jani.
>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Cc: Mike Ruhl <michael.j.ruhl at intel.com>
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit at intel.com>
> ---
> drivers/gpu/drm/i915/intel_pcode.c | 108 ++++++++++++++++-------------
> drivers/gpu/drm/i915/intel_pcode.h | 27 ++++++--
> 2 files changed, 82 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pcode.c b/drivers/gpu/drm/i915/intel_pcode.c
> index ac727546868e..0cff212cc81b 100644
> --- a/drivers/gpu/drm/i915/intel_pcode.c
> +++ b/drivers/gpu/drm/i915/intel_pcode.c
> @@ -6,6 +6,7 @@
> #include "i915_drv.h"
> #include "i915_reg.h"
> #include "intel_pcode.h"
> +#include "gt/intel_gt.h"
>
> static int gen6_check_mailbox_status(u32 mbox)
> {
> @@ -52,14 +53,14 @@ static int gen7_check_mailbox_status(u32 mbox)
> }
> }
>
> -static int __snb_pcode_rw(struct drm_i915_private *i915, u32 mbox,
> - u32 *val, u32 *val1,
> - int fast_timeout_us, int slow_timeout_ms,
> - bool is_read)
> +static int __gt_pcode_rw(struct intel_gt *gt, u32 mbox,
> + u32 *val, u32 *val1,
> + int fast_timeout_us, int slow_timeout_ms,
> + bool is_read)
> {
> - struct intel_uncore *uncore = &i915->uncore;
> + struct intel_uncore *uncore = gt->uncore;
>
> - lockdep_assert_held(&i915->sb_lock);
> + lockdep_assert_held(>->i915->sb_lock);
>
> /*
> * GEN6_PCODE_* are outside of the forcewake domain, we can use
> @@ -88,60 +89,60 @@ static int __snb_pcode_rw(struct drm_i915_private *i915, u32 mbox,
> if (is_read && val1)
> *val1 = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA1);
>
> - if (GRAPHICS_VER(i915) > 6)
> + if (GRAPHICS_VER(gt->i915) > 6)
> return gen7_check_mailbox_status(mbox);
> else
> return gen6_check_mailbox_status(mbox);
> }
>
> -int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1)
> +int intel_gt_pcode_read(struct intel_gt *gt, u32 mbox, u32 *val, u32 *val1)
> {
> int err;
>
> - mutex_lock(&i915->sb_lock);
> - err = __snb_pcode_rw(i915, mbox, val, val1, 500, 20, true);
> - mutex_unlock(&i915->sb_lock);
> + mutex_lock(>->i915->sb_lock);
> + err = __gt_pcode_rw(gt, mbox, val, val1, 500, 20, true);
> + mutex_unlock(>->i915->sb_lock);
>
> if (err) {
> - drm_dbg(&i915->drm,
> - "warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
> - mbox, __builtin_return_address(0), err);
> + drm_dbg(>->i915->drm,
> + "gt %d: warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
> + gt->info.id, mbox, __builtin_return_address(0), err);
> }
>
> return err;
> }
>
> -int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
> - int fast_timeout_us, int slow_timeout_ms)
> +int intel_gt_pcode_write_timeout(struct intel_gt *gt, u32 mbox, u32 val,
> + int fast_timeout_us, int slow_timeout_ms)
> {
> int err;
>
> - mutex_lock(&i915->sb_lock);
> - err = __snb_pcode_rw(i915, mbox, &val, NULL,
> - fast_timeout_us, slow_timeout_ms, false);
> - mutex_unlock(&i915->sb_lock);
> + mutex_lock(>->i915->sb_lock);
> + err = __gt_pcode_rw(gt, mbox, &val, NULL,
> + fast_timeout_us, slow_timeout_ms, false);
> + mutex_unlock(>->i915->sb_lock);
>
> if (err) {
> - drm_dbg(&i915->drm,
> - "warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
> - val, mbox, __builtin_return_address(0), err);
> + drm_dbg(>->i915->drm,
> + "gt %d: warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
> + gt->info.id, val, mbox, __builtin_return_address(0), err);
> }
>
> return err;
> }
>
> -static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
> - u32 request, u32 reply_mask, u32 reply,
> - u32 *status)
> +static bool __gt_pcode_try_request(struct intel_gt *gt, u32 mbox,
> + u32 request, u32 reply_mask, u32 reply,
> + u32 *status)
> {
> - *status = __snb_pcode_rw(i915, mbox, &request, NULL, 500, 0, true);
> + *status = __gt_pcode_rw(gt, mbox, &request, NULL, 500, 0, true);
>
> return (*status == 0) && ((request & reply_mask) == reply);
> }
>
> /**
> - * skl_pcode_request - send PCODE request until acknowledgment
> - * @i915: device private
> + * intel_gt_pcode_request - send PCODE request until acknowledgment
> + * @gt: gt
> * @mbox: PCODE mailbox ID the request is targeted for
> * @request: request ID
> * @reply_mask: mask used to check for request acknowledgment
> @@ -158,16 +159,16 @@ static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
> * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
> * other error as reported by PCODE.
> */
> -int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
> - u32 reply_mask, u32 reply, int timeout_base_ms)
> +int intel_gt_pcode_request(struct intel_gt *gt, u32 mbox, u32 request,
> + u32 reply_mask, u32 reply, int timeout_base_ms)
> {
> u32 status;
> int ret;
>
> - mutex_lock(&i915->sb_lock);
> + mutex_lock(>->i915->sb_lock);
>
> #define COND \
> - skl_pcode_try_request(i915, mbox, request, reply_mask, reply, &status)
> + __gt_pcode_try_request(gt, mbox, request, reply_mask, reply, &status)
>
> /*
> * Prime the PCODE by doing a request first. Normally it guarantees
> @@ -193,35 +194,48 @@ int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
> * requests, and for any quirks of the PCODE firmware that delays
> * the request completion.
> */
> - drm_dbg_kms(&i915->drm,
> + drm_dbg_kms(>->i915->drm,
> "PCODE timeout, retrying with preemption disabled\n");
> - drm_WARN_ON_ONCE(&i915->drm, timeout_base_ms > 3);
> + drm_WARN_ON_ONCE(>->i915->drm, timeout_base_ms > 3);
> preempt_disable();
> ret = wait_for_atomic(COND, 50);
> preempt_enable();
>
> out:
> - mutex_unlock(&i915->sb_lock);
> + mutex_unlock(>->i915->sb_lock);
> return status ? status : ret;
> #undef COND
> }
>
> +static int __gt_pcode_init(struct intel_gt *gt)
> +{
> + int ret = intel_gt_pcode_request(gt, DG1_PCODE_STATUS,
> + DG1_UNCORE_GET_INIT_STATUS,
> + DG1_UNCORE_INIT_STATUS_COMPLETE,
> + DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
> +
> + drm_dbg(>->i915->drm, "gt %d: PCODE init status %d\n", gt->info.id, ret);
> +
> + if (ret)
> + drm_err(>->i915->drm, "gt %d: Pcode did not report uncore initialization completion!\n",
> + gt->info.id);
> +
> + return ret;
> +}
> +
> int intel_pcode_init(struct drm_i915_private *i915)
> {
> - int ret = 0;
> + struct intel_gt *gt;
> + int i, ret = 0;
>
> if (!IS_DGFX(i915))
> return ret;
>
> - ret = skl_pcode_request(i915, DG1_PCODE_STATUS,
> - DG1_UNCORE_GET_INIT_STATUS,
> - DG1_UNCORE_INIT_STATUS_COMPLETE,
> - DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
> -
> - drm_dbg(&i915->drm, "PCODE init status %d\n", ret);
> -
> - if (ret)
> - drm_err(&i915->drm, "Pcode did not report uncore initialization completion!\n");
> + for_each_gt(gt, i915, i) {
> + ret = __gt_pcode_init(gt);
> + if (ret)
> + return ret;
> + }
>
> - return ret;
> + return 0;
> }
> diff --git a/drivers/gpu/drm/i915/intel_pcode.h b/drivers/gpu/drm/i915/intel_pcode.h
> index 0962a17fac48..96c954ec91f9 100644
> --- a/drivers/gpu/drm/i915/intel_pcode.h
> +++ b/drivers/gpu/drm/i915/intel_pcode.h
> @@ -8,16 +8,31 @@
>
> #include <linux/types.h>
>
> +struct intel_gt;
> struct drm_i915_private;
>
> -int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1);
> -int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
> - int fast_timeout_us, int slow_timeout_ms);
> -#define snb_pcode_write(i915, mbox, val) \
> +int intel_gt_pcode_read(struct intel_gt *gt, u32 mbox, u32 *val, u32 *val1);
> +
> +int intel_gt_pcode_write_timeout(struct intel_gt *gt, u32 mbox, u32 val,
> + int fast_timeout_us, int slow_timeout_ms);
> +
> +#define intel_gt_pcode_write(gt, mbox, val) \
> + intel_gt_pcode_write_timeout(gt, mbox, val, 500, 0)
> +
> +int intel_gt_pcode_request(struct intel_gt *gt, u32 mbox, u32 request,
> + u32 reply_mask, u32 reply, int timeout_base_ms);
> +
> +#define snb_pcode_read(i915, mbox, val, val1) \
> + intel_gt_pcode_read(&(i915)->gt0, mbox, val, val1)
> +
> +#define snb_pcode_write_timeout(i915, mbox, val, fast_timeout_us, slow_timeout_ms) \
> + intel_gt_pcode_write_timeout(&(i915)->gt0, mbox, val, fast_timeout_us, slow_timeout_ms)
> +
> +#define snb_pcode_write(i915, mbox, val) \
> snb_pcode_write_timeout(i915, mbox, val, 500, 0)
>
> -int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
> - u32 reply_mask, u32 reply, int timeout_base_ms);
> +#define skl_pcode_request(i915, mbox, request, reply_mask, reply, timeout_base_ms) \
> + intel_gt_pcode_request(&(i915)->gt0, mbox, request, reply_mask, reply, timeout_base_ms)
>
> int intel_pcode_init(struct drm_i915_private *i915);
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list