[Intel-gfx] [PATCH 1/2] drm/i915/display/drrs: Split the DRRS status per connector

[Souza, Jose]

On Thu, 2022-04-21 at 15:17 +0300, Ville Syrjälä wrote:
> On Mon, Apr 18, 2022 at 01:52:20PM -0700, José Roberto de Souza wrote:
> > Instead of keep the DRRS status of all connectors/pipe into a single
> > i915_drrs_status what makes user-space parsing terrible moving
> > each eDP connector status to its own folder.
> > 
> > As legacy support still returning the DRRS status of the first
> > eDP connector in the main i915_drrs_status.
> 
> I was thinking more along the lines of 
> crtc/drrs_something -> just the drrs state for this pipe
> connector/drrs_something -> just the info whether this connector supports drrs or not

In my opinion split the information into 2 different debugfs is not good.
Will make IGT more complicated, also this follows along with PSR debugfs.

> 
> We could also think about hoisting all this stuf into intel_drrs.c
> in the hopes of eventually hiding more of the drrs stuff from the
> rest of the driver.
> 
> > 
> > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
> > ---
> >  .../drm/i915/display/intel_display_debugfs.c  | 65 +++++++++++++------
> >  1 file changed, 46 insertions(+), 19 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > index 452d773fd4e34..0d7d2e750a4c7 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> > @@ -1068,43 +1068,35 @@ static int i915_ddb_info(struct seq_file *m, void *unused)
> >  	return 0;
> >  }
> >  
> > -static int i915_drrs_status(struct seq_file *m, void *unused)
> > +static int intel_drrs_status(struct seq_file *m, struct drm_connector *connector)
> >  {
> > -	struct drm_i915_private *dev_priv = node_to_i915(m->private);
> > -	struct drm_connector_list_iter conn_iter;
> > -	struct intel_connector *connector;
> > +	struct intel_connector *intel_connector = to_intel_connector(connector);
> > +	struct drm_i915_private *dev_priv = to_i915(connector->dev);
> >  	struct intel_crtc *crtc;
> >  
> > -	drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > -	for_each_intel_connector_iter(connector, &conn_iter) {
> > -		seq_printf(m, "[CONNECTOR:%d:%s] DRRS type: %s\n",
> > -			   connector->base.base.id, connector->base.name,
> > -			   intel_drrs_type_str(intel_panel_drrs_type(connector)));
> > -	}
> > -	drm_connector_list_iter_end(&conn_iter);
> > -
> > -	seq_puts(m, "\n");
> > +	seq_printf(m, "DRRS type: %s\n",
> > +		   intel_drrs_type_str(intel_panel_drrs_type(intel_connector)));
> >  
> >  	for_each_intel_crtc(&dev_priv->drm, crtc) {
> >  		const struct intel_crtc_state *crtc_state =
> >  			to_intel_crtc_state(crtc->base.state);
> >  
> > -		seq_printf(m, "[CRTC:%d:%s]:\n",
> > -			   crtc->base.base.id, crtc->base.name);
> > +		if (!(crtc_state->uapi.connector_mask & drm_connector_mask(connector)))
> > +			continue;
> >  
> >  		mutex_lock(&crtc->drrs.mutex);
> >  
> >  		/* DRRS Supported */
> > -		seq_printf(m, "\tDRRS Enabled: %s\n",
> > +		seq_printf(m, "DRRS Enabled: %s\n",
> >  			   str_yes_no(crtc_state->has_drrs));
> >  
> > -		seq_printf(m, "\tDRRS Active: %s\n",
> > +		seq_printf(m, "DRRS Active: %s\n",
> >  			   str_yes_no(intel_drrs_is_active(crtc)));
> >  
> > -		seq_printf(m, "\tBusy_frontbuffer_bits: 0x%X\n",
> > +		seq_printf(m, "Busy_frontbuffer_bits: 0x%X\n",
> >  			   crtc->drrs.busy_frontbuffer_bits);
> >  
> > -		seq_printf(m, "\tDRRS refresh rate: %s\n",
> > +		seq_printf(m, "DRRS refresh rate: %s\n",
> >  			   crtc->drrs.refresh_rate == DRRS_REFRESH_RATE_LOW ?
> >  			   "low" : "high");
> >  
> > @@ -1114,6 +1106,28 @@ static int i915_drrs_status(struct seq_file *m, void *unused)
> >  	return 0;
> >  }
> >  
> > +static int i915_drrs_status(struct seq_file *m, void *data)
> > +{
> > +	struct drm_i915_private *dev_priv = node_to_i915(m->private);
> > +	struct drm_connector_list_iter conn_iter;
> > +	struct drm_connector *connector = NULL;
> > +
> > +	/* Find the first eDP connector */
> > +	drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
> > +	drm_for_each_connector_iter(connector, &conn_iter) {
> > +		if (connector->connector_type != DRM_MODE_CONNECTOR_eDP)
> > +			continue;
> > +
> > +		break;
> > +	}
> > +	drm_connector_list_iter_end(&conn_iter);
> > +
> > +	if (!connector)
> > +		return -ENODEV;
> > +
> > +	return intel_drrs_status(m, connector);
> > +}
> > +
> >  static bool
> >  intel_lpsp_power_well_enabled(struct drm_i915_private *i915,
> >  			      enum i915_power_well_id power_well_id)
> > @@ -1990,6 +2004,14 @@ static int i915_psr_status_show(struct seq_file *m, void *data)
> >  }
> >  DEFINE_SHOW_ATTRIBUTE(i915_psr_status);
> >  
> > +static int i915_drrs_status_show(struct seq_file *m, void *data)
> > +{
> > +	struct drm_connector *connector = m->private;
> > +
> > +	return intel_drrs_status(m, connector);
> > +}
> > +DEFINE_SHOW_ATTRIBUTE(i915_drrs_status);
> > +
> >  static int i915_lpsp_capability_show(struct seq_file *m, void *data)
> >  {
> >  	struct drm_connector *connector = m->private;
> > @@ -2232,6 +2254,11 @@ void intel_connector_debugfs_add(struct intel_connector *intel_connector)
> >  				    connector, &i915_psr_status_fops);
> >  	}
> >  
> > +	if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) {
> > +		debugfs_create_file("i915_drrs_status", 0444, root,
> > +				    connector, &i915_drrs_status_fops);
> > +	}
> > +
> >  	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
> >  	    connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
> >  	    connector->connector_type == DRM_MODE_CONNECTOR_HDMIB) {
> > -- 
> > 2.35.3
>