[Intel-gfx] [PATCH v3 15/31] platform/x86: nvidia-wmi-ec-backlight: Move fw interface definitions to a header

Daniel Dadap ddadap at nvidia.com
Thu Aug 18 19:38:44 UTC 2022


On 8/18/22 1:42 PM, Hans de Goede wrote:
> Move the WMI interface definitions to a header, so that the definitions
> can be shared with drivers/acpi/video_detect.c .
>
> Suggested-by: Daniel Dadap <ddadap at nvidia.com>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>   MAINTAINERS                                   |  1 +
>   .../platform/x86/nvidia-wmi-ec-backlight.c    | 66 +----------------
>   .../x86/nvidia-wmi-ec-backlight.h             | 70 +++++++++++++++++++
>   3 files changed, 72 insertions(+), 65 deletions(-)
>   create mode 100644 include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8a5012ba6ff9..8d59c6e9b4db 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -14526,6 +14526,7 @@ M:	Daniel Dadap <ddadap at nvidia.com>
>   L:	platform-driver-x86 at vger.kernel.org
>   S:	Supported
>   F:	drivers/platform/x86/nvidia-wmi-ec-backlight.c
> +F:	include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
>   
>   NVM EXPRESS DRIVER
>   M:	Keith Busch <kbusch at kernel.org>
> diff --git a/drivers/platform/x86/nvidia-wmi-ec-backlight.c b/drivers/platform/x86/nvidia-wmi-ec-backlight.c
> index 61e37194df70..e84e1d629b14 100644
> --- a/drivers/platform/x86/nvidia-wmi-ec-backlight.c
> +++ b/drivers/platform/x86/nvidia-wmi-ec-backlight.c
> @@ -7,74 +7,10 @@
>   #include <linux/backlight.h>
>   #include <linux/mod_devicetable.h>
>   #include <linux/module.h>
> +#include <linux/platform_data/x86/nvidia-wmi-ec-backlight.h>
>   #include <linux/types.h>
>   #include <linux/wmi.h>
>   
> -/**
> - * enum wmi_brightness_method - WMI method IDs
> - * @WMI_BRIGHTNESS_METHOD_LEVEL:  Get/Set EC brightness level status
> - * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source
> - */
> -enum wmi_brightness_method {
> -	WMI_BRIGHTNESS_METHOD_LEVEL = 1,
> -	WMI_BRIGHTNESS_METHOD_SOURCE = 2,
> -	WMI_BRIGHTNESS_METHOD_MAX
> -};
> -
> -/**
> - * enum wmi_brightness_mode - Operation mode for WMI-wrapped method
> - * @WMI_BRIGHTNESS_MODE_GET:            Get the current brightness level/source.
> - * @WMI_BRIGHTNESS_MODE_SET:            Set the brightness level.
> - * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL:  Get the maximum brightness level. This
> - *                                      is only valid when the WMI method is
> - *                                      %WMI_BRIGHTNESS_METHOD_LEVEL.
> - */
> -enum wmi_brightness_mode {
> -	WMI_BRIGHTNESS_MODE_GET = 0,
> -	WMI_BRIGHTNESS_MODE_SET = 1,
> -	WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2,
> -	WMI_BRIGHTNESS_MODE_MAX
> -};
> -
> -/**
> - * enum wmi_brightness_source - Backlight brightness control source selection
> - * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU.
> - * @WMI_BRIGHTNESS_SOURCE_EC:  Backlight brightness is controlled by the
> - *                             system's Embedded Controller (EC).
> - * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the
> - *                             DisplayPort AUX channel.
> - */
> -enum wmi_brightness_source {
> -	WMI_BRIGHTNESS_SOURCE_GPU = 1,
> -	WMI_BRIGHTNESS_SOURCE_EC = 2,
> -	WMI_BRIGHTNESS_SOURCE_AUX = 3,
> -	WMI_BRIGHTNESS_SOURCE_MAX
> -};
> -
> -/**
> - * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method
> - * @mode:    Pass in an &enum wmi_brightness_mode value to select between
> - *           getting or setting a value.
> - * @val:     In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET
> - *           mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or
> - *           %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode.
> - * @ret:     Out parameter returning retrieved value when operating in
> - *           %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL
> - *           mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode.
> - * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct.
> - *
> - * This is the parameters structure for the WmiBrightnessNotify ACPI method as
> - * wrapped by WMI. The value passed in to @val or returned by @ret will be a
> - * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or
> - * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE.
> - */
> -struct wmi_brightness_args {
> -	u32 mode;
> -	u32 val;
> -	u32 ret;
> -	u32 ignored[3];
> -};
> -
>   /**
>    * wmi_brightness_notify() - helper function for calling WMI-wrapped ACPI method
>    * @w:    Pointer to the struct wmi_device identified by %WMI_BRIGHTNESS_GUID
> diff --git a/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
> new file mode 100644
> index 000000000000..d83104c6c6cb
> --- /dev/null
> +++ b/include/linux/platform_data/x86/nvidia-wmi-ec-backlight.h
> @@ -0,0 +1,70 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */


Should the copyright notice from nvidia-wmi-ec-backlight be copied here 
as well?


> +#ifndef __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H
> +#define __PLATFORM_DATA_X86_NVIDIA_WMI_EC_BACKLIGHT_H
> +
> +/**
> + * enum wmi_brightness_method - WMI method IDs
> + * @WMI_BRIGHTNESS_METHOD_LEVEL:  Get/Set EC brightness level status
> + * @WMI_BRIGHTNESS_METHOD_SOURCE: Get/Set EC Brightness Source
> + */
> +enum wmi_brightness_method {
> +	WMI_BRIGHTNESS_METHOD_LEVEL = 1,
> +	WMI_BRIGHTNESS_METHOD_SOURCE = 2,
> +	WMI_BRIGHTNESS_METHOD_MAX
> +};


It might be nice, but certainly not essential, to namespace these 
better, now that they're no longer internal to the EC backlight driver. 
I did that in the version of this change that I had started working up, 
but got kind of annoyed that it made a lot of lines go over 80 columns, 
and then got distracted by other work and never ended up finishing the 
change up. I guess it's probably fine to leave them as is, since there 
won't be many files that include this header.


> +
> +/**
> + * enum wmi_brightness_mode - Operation mode for WMI-wrapped method
> + * @WMI_BRIGHTNESS_MODE_GET:            Get the current brightness level/source.
> + * @WMI_BRIGHTNESS_MODE_SET:            Set the brightness level.
> + * @WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL:  Get the maximum brightness level. This
> + *                                      is only valid when the WMI method is
> + *                                      %WMI_BRIGHTNESS_METHOD_LEVEL.
> + */
> +enum wmi_brightness_mode {
> +	WMI_BRIGHTNESS_MODE_GET = 0,
> +	WMI_BRIGHTNESS_MODE_SET = 1,
> +	WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL = 2,
> +	WMI_BRIGHTNESS_MODE_MAX
> +};
> +
> +/**
> + * enum wmi_brightness_source - Backlight brightness control source selection
> + * @WMI_BRIGHTNESS_SOURCE_GPU: Backlight brightness is controlled by the GPU.
> + * @WMI_BRIGHTNESS_SOURCE_EC:  Backlight brightness is controlled by the
> + *                             system's Embedded Controller (EC).
> + * @WMI_BRIGHTNESS_SOURCE_AUX: Backlight brightness is controlled over the
> + *                             DisplayPort AUX channel.
> + */
> +enum wmi_brightness_source {
> +	WMI_BRIGHTNESS_SOURCE_GPU = 1,
> +	WMI_BRIGHTNESS_SOURCE_EC = 2,
> +	WMI_BRIGHTNESS_SOURCE_AUX = 3,
> +	WMI_BRIGHTNESS_SOURCE_MAX
> +};
> +
> +/**
> + * struct wmi_brightness_args - arguments for the WMI-wrapped ACPI method
> + * @mode:    Pass in an &enum wmi_brightness_mode value to select between
> + *           getting or setting a value.
> + * @val:     In parameter for value to set when using %WMI_BRIGHTNESS_MODE_SET
> + *           mode. Not used in conjunction with %WMI_BRIGHTNESS_MODE_GET or
> + *           %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL mode.
> + * @ret:     Out parameter returning retrieved value when operating in
> + *           %WMI_BRIGHTNESS_MODE_GET or %WMI_BRIGHTNESS_MODE_GET_MAX_LEVEL
> + *           mode. Not used in %WMI_BRIGHTNESS_MODE_SET mode.
> + * @ignored: Padding; not used. The ACPI method expects a 24 byte params struct.
> + *
> + * This is the parameters structure for the WmiBrightnessNotify ACPI method as
> + * wrapped by WMI. The value passed in to @val or returned by @ret will be a
> + * brightness value when the WMI method ID is %WMI_BRIGHTNESS_METHOD_LEVEL, or
> + * an &enum wmi_brightness_source value with %WMI_BRIGHTNESS_METHOD_SOURCE.
> + */
> +struct wmi_brightness_args {
> +	u32 mode;
> +	u32 val;
> +	u32 ret;
> +	u32 ignored[3];
> +};
> +
> +#endif


More information about the Intel-gfx mailing list