[Intel-gfx] [PATCH v6 3/4] drm/i915/display: add hotplug.suspended flag
Imre Deak
imre.deak at intel.com
Wed Aug 24 11:22:53 UTC 2022
On Tue, Aug 23, 2022 at 11:48:01PM +0200, Andrzej Hajda wrote:
>
>
> On 22.08.2022 19:27, Imre Deak wrote:
> > On Fri, Jul 22, 2022 at 02:51:42PM +0200, Andrzej Hajda wrote:
> > > HPD events during driver removal can be generated by hardware and
> > > software frameworks - drm_dp_mst, the former we can avoid by disabling
> > > interrupts, the latter can be triggered by any drm_dp_mst transaction,
> > > and this is too late. Introducing suspended flag allows to solve this
> > > chicken-egg problem.
> > intel_hpd_cancel_work() is always called after suspending MST and
> > disabling IRQs (with the order I suggested in patch 1). If both of these
> > have disabled the corresponding functionality (MST, IRQs) properly with
> > all their MST/IRQ scheduled works guaranteed to not get rescheduled,
> > then it's not clear how could either intel_hpd_trigger_irq() or an IRQ
> > work run. So the problematic sequence would need a better explanation.
>
> I am not familiar with MST but as I understand from earlier discussion MST
> framework can be called during driver removal code even after
> intel_dp_mst_suspend.
Not sure how that happens, but it looks wrong. One way I can imagine is
that connector detection re-enables MST, which should be prevented then.
> And since MST transfer can timeout it can trigger
> drm_dp_mst_wait_tx_reply --> mgr->cbs->poll_hpd_irq(mgr) -->
> intel_dp_mst_poll_hpd_irq --> intel_hpd_trigger_irq.
>
> So actually this patch supersedes the 1st patch.
>
> >
> > There's also already
> > dev_priv->runtime_pm.irqs_enabled
> > showing if hotplug interrupts are disabled (along with all other IRQs).
>
> So it is slightly different, this patch introduces flag indicating if HPD is
> enabled, we can have IRQs not related to HPD, and HPD events not related to
> IRQs.
In its current form I can't see a difference. What would make sense is
to add a flag that prevents connector detection (which would
incorrectly enable MST for instace), but leave the handling of other
interrupts enabled. That flag would be set already before suspending
MST.
> Regards
> Andrzej
>
> >
> > > Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5950
> > > Signed-off-by: Andrzej Hajda <andrzej.hajda at intel.com>
> > > Reviewed-by: Arun R Murthy <arun.r.murthy at intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 2 +-
> > > drivers/gpu/drm/i915/display/intel_hotplug.c | 11 ++++++++++-
> > > drivers/gpu/drm/i915/display/intel_hotplug.h | 2 +-
> > > drivers/gpu/drm/i915/i915_driver.c | 4 ++--
> > > drivers/gpu/drm/i915/i915_drv.h | 2 ++
> > > 5 files changed, 16 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index f1c765ac7ab8aa..cd6139bb36151b 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -9022,7 +9022,7 @@ void intel_modeset_driver_remove_noirq(struct drm_i915_private *i915)
> > > intel_dp_mst_suspend(i915);
> > > /* MST is the last user of HPD work */
> > > - intel_hpd_cancel_work(i915);
> > > + intel_hpd_suspend(i915);
> > > /* poll work can call into fbdev, hence clean that up afterwards */
> > > intel_fbdev_fini(i915);
> > > diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.c b/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > index 5f8b4f481cff9a..e1d384cb99df6b 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_hotplug.c
> > > @@ -303,6 +303,8 @@ static void i915_digport_work_func(struct work_struct *work)
> > > u32 old_bits = 0;
> > > spin_lock_irq(&dev_priv->irq_lock);
> > > + if (dev_priv->hotplug.suspended)
> > > + return spin_unlock_irq(&dev_priv->irq_lock);
> > > long_port_mask = dev_priv->hotplug.long_port_mask;
> > > dev_priv->hotplug.long_port_mask = 0;
> > > short_port_mask = dev_priv->hotplug.short_port_mask;
> > > @@ -353,6 +355,8 @@ void intel_hpd_trigger_irq(struct intel_digital_port *dig_port)
> > > struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> > > spin_lock_irq(&i915->irq_lock);
> > > + if (i915->hotplug.suspended)
> > > + return spin_unlock_irq(&i915->irq_lock);
> > > i915->hotplug.short_port_mask |= BIT(dig_port->base.port);
> > > spin_unlock_irq(&i915->irq_lock);
> > > @@ -475,6 +479,9 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
> > > spin_lock(&dev_priv->irq_lock);
> > > + if (dev_priv->hotplug.suspended)
> > > + return spin_unlock(&dev_priv->irq_lock);
> > > +
> > > /*
> > > * Determine whether ->hpd_pulse() exists for each pin, and
> > > * whether we have a short or a long pulse. This is needed
> > > @@ -603,6 +610,7 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
> > > * just to make the assert_spin_locked checks happy.
> > > */
> > > spin_lock_irq(&dev_priv->irq_lock);
> > > + dev_priv->hotplug.suspended = false;
> > > intel_hpd_irq_setup(dev_priv);
> > > spin_unlock_irq(&dev_priv->irq_lock);
> > > }
> > > @@ -721,13 +729,14 @@ void intel_hpd_init_work(struct drm_i915_private *dev_priv)
> > > intel_hpd_irq_storm_reenable_work);
> > > }
> > > -void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
> > > +void intel_hpd_suspend(struct drm_i915_private *dev_priv)
> > > {
> > > if (!HAS_DISPLAY(dev_priv))
> > > return;
> > > spin_lock_irq(&dev_priv->irq_lock);
> > > + dev_priv->hotplug.suspended = true;
> > > dev_priv->hotplug.long_port_mask = 0;
> > > dev_priv->hotplug.short_port_mask = 0;
> > > dev_priv->hotplug.event_bits = 0;
> > > diff --git a/drivers/gpu/drm/i915/display/intel_hotplug.h b/drivers/gpu/drm/i915/display/intel_hotplug.h
> > > index b87e95d606e668..54bddc4dd63421 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_hotplug.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_hotplug.h
> > > @@ -23,7 +23,7 @@ void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
> > > void intel_hpd_trigger_irq(struct intel_digital_port *dig_port);
> > > void intel_hpd_init(struct drm_i915_private *dev_priv);
> > > void intel_hpd_init_work(struct drm_i915_private *dev_priv);
> > > -void intel_hpd_cancel_work(struct drm_i915_private *dev_priv);
> > > +void intel_hpd_suspend(struct drm_i915_private *dev_priv);
> > > enum hpd_pin intel_hpd_pin_default(struct drm_i915_private *dev_priv,
> > > enum port port);
> > > bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
> > > diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
> > > index deb8a8b76965a1..57a063a306e3a4 100644
> > > --- a/drivers/gpu/drm/i915/i915_driver.c
> > > +++ b/drivers/gpu/drm/i915/i915_driver.c
> > > @@ -1092,7 +1092,7 @@ void i915_driver_shutdown(struct drm_i915_private *i915)
> > > intel_dp_mst_suspend(i915);
> > > intel_runtime_pm_disable_interrupts(i915);
> > > - intel_hpd_cancel_work(i915);
> > > + intel_hpd_suspend(i915);
> > > intel_suspend_encoders(i915);
> > > intel_shutdown_encoders(i915);
> > > @@ -1161,7 +1161,7 @@ static int i915_drm_suspend(struct drm_device *dev)
> > > intel_dp_mst_suspend(dev_priv);
> > > intel_runtime_pm_disable_interrupts(dev_priv);
> > > - intel_hpd_cancel_work(dev_priv);
> > > + intel_hpd_suspend(dev_priv);
> > > intel_suspend_encoders(dev_priv);
> > > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > > index d25647be25d18b..dc1562b95d7ade 100644
> > > --- a/drivers/gpu/drm/i915/i915_drv.h
> > > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > > @@ -106,6 +106,8 @@ struct vlv_s0ix_state;
> > > #define HPD_STORM_DEFAULT_THRESHOLD 50
> > > struct i915_hotplug {
> > > + bool suspended;
> > > +
> > > struct delayed_work hotplug_work;
> > > const u32 *hpd, *pch_hpd;
> > > --
> > > 2.25.1
> > >
>
More information about the Intel-gfx
mailing list