[Intel-gfx] [PATCH 2/2] drm/i915: Add DSC support to MST path

Lisovskiy, Stanislav stanislav.lisovskiy at intel.com
Thu Aug 25 15:17:57 UTC 2022


On Thu, Aug 25, 2022 at 05:58:19PM +0300, Govindapillai, Vinod wrote:
> Hi Stan,
> 
> Some comments inline..
> 
> On Mon, 2022-08-22 at 12:40 +0300, Stanislav Lisovskiy wrote:
> > Whenever we are not able to get enough timeslots
> > for required PBN, let's try to allocate those
> > using DSC, just same way as we do for SST.
> > 
> > v2: Removed intel_dp_mst_dsc_compute_config and refactored
> >     intel_dp_dsc_compute_config to support timeslots as a
> >     parameter(Ville Syrjälä)
> > 
> > v3: - Rebased
> >     - Added a debug to see that we at least try reserving
> >       VCPI slots using DSC, because currently its not visible
> >       from the logs, thus making debugging more tricky.
> >     - Moved timeslots to numerator, where it should be.
> > 
> > v4: - Call drm_dp_mst_atomic_check already during link
> >       config computation, because we need to know already
> >       by this moment if uncompressed amount of VCPI slots
> >       needed can fit, otherwise we need to use DSC.
> >       (thanks to Vinod Govindapillai for pointing this out)
> > 
> > v5: - Put pipe_config->bigjoiner_pipes back to original
> >       condition in intel_dp_dsc_compute_config
> >       (don't remember when I lost it)
> > 
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_dp.c     |  73 ++++-----
> >  drivers/gpu/drm/i915/display/intel_dp.h     |  17 +++
> >  drivers/gpu/drm/i915/display/intel_dp_mst.c | 157 ++++++++++++++++++++
> >  3 files changed, 205 insertions(+), 42 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 32292c0be2bd..519b436fc530 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -116,7 +116,6 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
> >  }
> >  
> >  static void intel_dp_unset_edid(struct intel_dp *intel_dp);
> > -static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
> >  
> >  /* Is link rate UHBR and thus 128b/132b? */
> >  bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
> > @@ -687,11 +686,12 @@ small_joiner_ram_size_bits(struct drm_i915_private *i915)
> >                 return 6144 * 8;
> >  }
> >  
> > -static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > -                                      u32 link_clock, u32 lane_count,
> > -                                      u32 mode_clock, u32 mode_hdisplay,
> > -                                      bool bigjoiner,
> > -                                      u32 pipe_bpp)
> > +u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > +                               u32 link_clock, u32 lane_count,
> > +                               u32 mode_clock, u32 mode_hdisplay,
> > +                               bool bigjoiner,
> > +                               u32 pipe_bpp,
> > +                               u32 timeslots)
> >  {
> >         u32 bits_per_pixel, max_bpp_small_joiner_ram;
> >         int i;
> > @@ -702,8 +702,9 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> >          * for SST -> TimeSlotsPerMTP is 1,
> >          * for MST -> TimeSlotsPerMTP has to be calculated
> >          */
> > -       bits_per_pixel = (link_clock * lane_count * 8) /
> > +       bits_per_pixel = (link_clock * lane_count * 8) * timeslots /
> >                          intel_dp_mode_to_fec_clock(mode_clock);
> > +       drm_dbg_kms(&i915->drm, "Max link bpp: %u\n", bits_per_pixel);
> >  
> >         /* Small Joiner Check: output bpp <= joiner RAM (bits) / Horiz. width */
> >         max_bpp_small_joiner_ram = small_joiner_ram_size_bits(i915) /
> > @@ -752,9 +753,9 @@ static u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> >         return bits_per_pixel << 4;
> >  }
> >  
> > -static u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> > -                                      int mode_clock, int mode_hdisplay,
> > -                                      bool bigjoiner)
> > +u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> > +                               int mode_clock, int mode_hdisplay,
> > +                               bool bigjoiner)
> >  {
> >         struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> >         u8 min_slice_count, i;
> > @@ -961,8 +962,8 @@ intel_dp_mode_valid_downstream(struct intel_connector *connector,
> >         return MODE_OK;
> >  }
> >  
> > -static bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
> > -                                   int hdisplay, int clock)
> > +bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
> > +                            int hdisplay, int clock)
> >  {
> >         struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> >  
> > @@ -1049,7 +1050,7 @@ intel_dp_mode_valid(struct drm_connector *_connector,
> >                                                             target_clock,
> >                                                             mode->hdisplay,
> >                                                             bigjoiner,
> > -                                                           pipe_bpp) >> 4;
> > +                                                           pipe_bpp, 1) >> 4;
> >                         dsc_slice_count =
> >                                 intel_dp_dsc_get_slice_count(intel_dp,
> >                                                              target_clock,
> > @@ -1354,7 +1355,7 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
> >         return -EINVAL;
> >  }
> >  
> > -static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> > +int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
> >  {
> >         struct drm_i915_private *i915 = dp_to_i915(intel_dp);
> >         int i, num_bpc;
> > @@ -1444,10 +1445,11 @@ static int intel_dp_dsc_compute_params(struct intel_encoder *encoder,
> >         return drm_dsc_compute_rc_parameters(vdsc_cfg);
> >  }
> >  
> > -static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> > -                                      struct intel_crtc_state *pipe_config,
> > -                                      struct drm_connector_state *conn_state,
> > -                                      struct link_config_limits *limits)
> > +int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> > +                               struct intel_crtc_state *pipe_config,
> > +                               struct drm_connector_state *conn_state,
> > +                               struct link_config_limits *limits,
> > +                               int timeslots)
> >  {
> >         struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> >         struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
> > @@ -1498,7 +1500,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >                                                     adjusted_mode->crtc_clock,
> >                                                     adjusted_mode->crtc_hdisplay,
> >                                                     pipe_config->bigjoiner_pipes,
> > -                                                   pipe_bpp);
> > +                                                   pipe_bpp,
> > +                                                   timeslots);
> >                 dsc_dp_slice_count =
> >                         intel_dp_dsc_get_slice_count(intel_dp,
> >                                                      adjusted_mode->crtc_clock,
> > @@ -1510,27 +1513,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >                         return -EINVAL;
> >                 }
> >                 pipe_config->dsc.compressed_bpp = min_t(u16,
> > -                                                              dsc_max_output_bpp >> 4,
> > -                                                              pipe_config->pipe_bpp);
> > +                                                       dsc_max_output_bpp >> 4,
> > +                                                       pipe_config->pipe_bpp);
> >                 pipe_config->dsc.slice_count = dsc_dp_slice_count;
> > +               drm_dbg_kms(&dev_priv->drm, "DSC: compressed bpp %d slice count %d\n",
> > +                           pipe_config->dsc.compressed_bpp,
> > +                           pipe_config->dsc.slice_count);
> >         }
> > -
> > -       /* As of today we support DSC for only RGB */
> > -       if (intel_dp->force_dsc_bpp) {
> > -               if (intel_dp->force_dsc_bpp >= 8 &&
> > -                   intel_dp->force_dsc_bpp < pipe_bpp) {
> > -                       drm_dbg_kms(&dev_priv->drm,
> > -                                   "DSC BPP forced to %d",
> > -                                   intel_dp->force_dsc_bpp);
> > -                       pipe_config->dsc.compressed_bpp =
> > -                                               intel_dp->force_dsc_bpp;
> > -               } else {
> > -                       drm_dbg_kms(&dev_priv->drm,
> > -                                   "Invalid DSC BPP %d",
> > -                                   intel_dp->force_dsc_bpp);
> > -               }
> > -       }
> > -
> >         /*
> >          * VDSC engine operates at 1 Pixel per clock, so if peak pixel rate
> >          * is greater than the maximum Cdclock and if slice count is even
> > @@ -1538,13 +1527,13 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> >          */
> >         if (adjusted_mode->crtc_clock > dev_priv->max_cdclk_freq ||
> >             pipe_config->bigjoiner_pipes) {
> > -               if (pipe_config->dsc.slice_count < 2) {
> > +               if (pipe_config->dsc.slice_count > 1) {
> > +                       pipe_config->dsc.dsc_split = true;
> > +               } else {
> >                         drm_dbg_kms(&dev_priv->drm,
> >                                     "Cannot split stream to use 2 VDSC instances\n");
> >                         return -EINVAL;
> >                 }
> > -
> > -               pipe_config->dsc.dsc_split = true;
> >         }
> >  
> >         ret = intel_dp_dsc_compute_params(&dig_port->base, pipe_config);
> > @@ -1633,7 +1622,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
> >                             str_yes_no(ret), str_yes_no(joiner_needs_dsc),
> >                             str_yes_no(intel_dp->force_dsc_en));
> >                 ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
> > -                                                 conn_state, &limits);
> > +                                                 conn_state, &limits, 1);
> >                 if (ret < 0)
> >                         return ret;
> >         }
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> > index a54902c713a3..c6539a6915e9 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.h
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> > @@ -56,6 +56,11 @@ void intel_dp_encoder_flush_work(struct drm_encoder *encoder);
> >  int intel_dp_compute_config(struct intel_encoder *encoder,
> >                             struct intel_crtc_state *pipe_config,
> >                             struct drm_connector_state *conn_state);
> > +int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
> > +                               struct intel_crtc_state *pipe_config,
> > +                               struct drm_connector_state *conn_state,
> > +                               struct link_config_limits *limits,
> > +                               int timeslots);
> >  bool intel_dp_is_edp(struct intel_dp *intel_dp);
> >  bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state);
> >  bool intel_dp_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
> > @@ -96,6 +101,18 @@ void intel_read_dp_sdp(struct intel_encoder *encoder,
> >                        struct intel_crtc_state *crtc_state,
> >                        unsigned int type);
> >  bool intel_digital_port_connected(struct intel_encoder *encoder);
> > +int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
> > +u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
> > +                               u32 link_clock, u32 lane_count,
> > +                               u32 mode_clock, u32 mode_hdisplay,
> > +                               bool bigjoiner,
> > +                               u32 pipe_bpp,
> > +                               u32 timeslots);
> > +u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> > +                               int mode_clock, int mode_hdisplay,
> > +                               bool bigjoiner);
> > +bool intel_dp_need_bigjoiner(struct intel_dp *intel_dp,
> > +                            int hdisplay, int clock);
> >  
> >  static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
> >  {
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > index 14d2a64193b2..b4d68c324e68 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> > @@ -99,6 +99,84 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
> >         return 0;
> >  }
> >  
> > +static int intel_dp_dsc_mst_compute_link_config(struct intel_encoder *encoder,
> > +                                               struct intel_crtc_state *crtc_state,
> > +                                               struct drm_connector_state *conn_state,
> > +                                               struct link_config_limits *limits)
> > +{
> > +       struct drm_atomic_state *state = crtc_state->uapi.state;
> > +       struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
> > +       struct intel_dp *intel_dp = &intel_mst->primary->dp;
> > +       struct intel_connector *connector =
> > +               to_intel_connector(conn_state->connector);
> > +       struct drm_i915_private *i915 = to_i915(connector->base.dev);
> > +       const struct drm_display_mode *adjusted_mode =
> > +               &crtc_state->hw.adjusted_mode;
> > +       bool constant_n = drm_dp_has_quirk(&intel_dp->desc,
> > +                                          DP_DPCD_QUIRK_CONSTANT_N);
> > +       int bpp, slots = -EINVAL;
> > +       int i, num_bpc;
> > +       u8 dsc_bpc[3] = {0};
> > +       int min_bpp, max_bpp;
> > +       u8 dsc_max_bpc;
> > +
> > +       crtc_state->lane_count = limits->max_lane_count;
> > +       crtc_state->port_clock = limits->max_rate;
> > +
> > +       /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
> > +       if (DISPLAY_VER(i915) >= 12)
> > +               dsc_max_bpc = min_t(u8, 12, conn_state->max_requested_bpc);
> > +       else
> > +               dsc_max_bpc = min_t(u8, 10, conn_state->max_requested_bpc);
> > +
> > +       max_bpp = min_t(u8, dsc_max_bpc * 3, limits->max_bpp);
> > +       min_bpp = limits->min_bpp;
> > +
> > +       num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
> > +                                                      dsc_bpc);
> > +       for (i = 0; i < num_bpc; i++) {
> > +               if (max_bpp >= dsc_bpc[i] * 3)
> > +                       if (min_bpp > dsc_bpc[i] * 3)
> > +                               min_bpp = dsc_bpc[i] * 3;
> > +       }
> > +
> > +       drm_dbg_kms(&i915->drm, "DSC Sink supported min bpp %d max bpp %d\n",
> > +                   min_bpp, max_bpp);
> > +
> > +       for (bpp = max_bpp; bpp >= min_bpp; bpp -= 2 * 3) {
> > +               crtc_state->pbn = drm_dp_calc_pbn_mode(adjusted_mode->crtc_clock,
> > +                                                      bpp << 4,
> > +                                                      true);
> > +
> > +               slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
> > +                                                     connector->port,
> > +                                                     crtc_state->pbn, 0);
> > +
> > +               drm_dbg_kms(&i915->drm, "Trying bpp %d got %d pbn %d slots\n",
> > +                           bpp, crtc_state->pbn, slots);
> > +
> > +               if (slots == -EDEADLK)
> > +                       return slots;
> > +               if (slots >= 0)
> > +                       break;
> Based on our understanding that drm_dp_atomic_find_vcpi_slots" doesn't check any limits, we cannot
> use that as a basis for "slots" decision, isnt it? Don't you need to use the same 
> drm_dp_mst_atomic_check() here as well? 
> 
> Or move the drm_dp_mst_atomic_check() to the intel_dp_mst_compute_link_config()?

That would be double check because we do call that check later in intel_atomic_check
anyway. I had to add it here, just to decide if we use DSC or not. However if here we
chose DSC and drm_dp_atomic_find_vcpi_slots returns amount of VCPI slots that can't be 
fit - drm_dp_mst_atomic_check which is called later in intel_atomic_check will take care
of that. Just like it would take care if DSC was not supported and we ran out of BW/MST slots..

Stan

> 
> > +       }
> > +
> > +       if (slots < 0) {
> > +               drm_dbg_kms(&i915->drm, "failed finding vcpi slots:%d\n",
> > +                           slots);
> > +               return slots;
> > +       }
> > +
> > +       intel_link_compute_m_n(crtc_state->pipe_bpp,
> > +                              crtc_state->lane_count,
> > +                              adjusted_mode->crtc_clock,
> > +                              crtc_state->port_clock,
> > +                              &crtc_state->dp_m_n,
> > +                              constant_n, crtc_state->fec_enable);
> > +       crtc_state->dp_m_n.tu = slots;
> > +
> > +       return 0;
> > +}
> >  static int intel_dp_mst_update_slots(struct intel_encoder *encoder,
> >                                      struct intel_crtc_state *crtc_state,
> >                                      struct drm_connector_state *conn_state)
> > @@ -127,6 +205,7 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
> >                                        struct drm_connector_state *conn_state)
> >  {
> >         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > +       struct drm_atomic_state *state = pipe_config->uapi.state;
> >         struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
> >         struct intel_dp *intel_dp = &intel_mst->primary->dp;
> >         struct intel_connector *connector =
> > @@ -175,6 +254,38 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
> >  
> >         ret = intel_dp_mst_compute_link_config(encoder, pipe_config,
> >                                                conn_state, &limits);
> > +
> > +       if (ret == -EDEADLK)
> > +               return ret;
> > +
> > +       /*
> > +        * We need to check if VCPI slots allocated can actually fit already
> > +        * here, to decide whether we use DSC or not.
> > +        * If either intel_dp_mst_compute_link_config or that one fails,
> > +        * then we try DSC as last resort.
> > +        */
> > +       if (!ret)
> > +               ret = drm_dp_mst_atomic_check(state);
> > +
> > +       /* enable compression if the mode doesn't fit available BW */
> > +       drm_dbg_kms(&dev_priv->drm, "Force DSC en = %d\n", intel_dp->force_dsc_en);
> > +       if (ret || intel_dp->force_dsc_en) {
> > +               /*
> > +                * Try to get at least some timeslots and then see, if
> > +                * we can fit there with DSC.
> > +                */
> > +               drm_dbg_kms(&dev_priv->drm, "Trying to find VCPI slots in DSC mode\n");
> > +
> > +               ret = intel_dp_dsc_mst_compute_link_config(encoder, pipe_config,
> > +                                                          conn_state, &limits);
> > +               if (ret < 0)
> > +                       return ret;
> > +
> > +               ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
> > +                                                 conn_state, &limits,
> > +                                                 pipe_config->dp_m_n.tu);
> > +       }
> > +
> >         if (ret)
> >                 return ret;
> >  
> > @@ -713,6 +824,10 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
> >         int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> >         int max_rate, mode_rate, max_lanes, max_link_clock;
> >         int ret;
> > +       bool dsc = false, bigjoiner = false;
> > +       u16 dsc_max_output_bpp = 0;
> > +       u8 dsc_slice_count = 0;
> > +       int target_clock = mode->clock;
> >  
> >         if (drm_connector_is_unregistered(connector)) {
> >                 *status = MODE_ERROR;
> > @@ -750,6 +865,48 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
> >                 return 0;
> >         }
> >  
> > +       if (intel_dp_need_bigjoiner(intel_dp, mode->hdisplay, target_clock)) {
> > +               bigjoiner = true;
> > +               max_dotclk *= 2;
> > +       }
> > +
> > +       if (DISPLAY_VER(dev_priv) >= 10 &&
> > +           drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
> > +               /*
> > +                * TBD pass the connector BPC,
> > +                * for now U8_MAX so that max BPC on that platform would be picked
> > +                */
> > +               int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
> > +
> > +               if (drm_dp_sink_supports_fec(intel_dp->fec_capable)) {
> > +                       dsc_max_output_bpp =
> > +                               intel_dp_dsc_get_output_bpp(dev_priv,
> > +                                                           max_link_clock,
> > +                                                           max_lanes,
> > +                                                           target_clock,
> > +                                                           mode->hdisplay,
> > +                                                           bigjoiner,
> > +                                                           pipe_bpp, 1) >> 4;
> > +                       dsc_slice_count =
> > +                               intel_dp_dsc_get_slice_count(intel_dp,
> > +                                                            target_clock,
> > +                                                            mode->hdisplay,
> > +                                                            bigjoiner);
> > +               }
> > +
> > +               dsc = dsc_max_output_bpp && dsc_slice_count;
> > +       }
> > +
> > +       /*
> > +        * Big joiner configuration needs DSC for TGL which is not true for
> > +        * XE_LPD where uncompressed joiner is supported.
> > +        */
> > +       if (DISPLAY_VER(dev_priv) < 13 && bigjoiner && !dsc)
> > +               return MODE_CLOCK_HIGH;
> > +
> > +       if (mode_rate > max_rate && !dsc)
> > +               return MODE_CLOCK_HIGH;
> > +
> >         *status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
> >         return 0;
> >  }
> 


More information about the Intel-gfx mailing list