[Intel-gfx] [PATCH 02/11] drm/edid: Clarify why we only accept the "range limits only" descriptor

[Navare, Manasi]

On Sat, Aug 27, 2022 at 12:34:52AM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> The current comment fails to clarify why we only accept
> the "range limits only" variant of the range descriptor.
> Reword it to make some actual sense.
>

Thanks Ville for adding this description for monitor_range

Reviewed-by: Manasi Navare <manasi.d.navare at intel.com>

Manasi

> Cc: Manasi Navare <manasi.d.navare at intel.com>
> Cc: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
> Cc: Harry Wentland <harry.wentland at amd.com>
> Cc: Leo Li <sunpeng.li at amd.com>
> Cc: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
> Cc: amd-gfx at lists.freedesktop.org
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c | 11 +++++++----
>  1 file changed, 7 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index 4005dab6147d..ac662495635c 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -6033,10 +6033,13 @@ void get_monitor_range(const struct detailed_timing *timing, void *c)
>  		return;
>  
>  	/*
> -	 * Check for flag range limits only. If flag == 1 then
> -	 * no additional timing information provided.
> -	 * Default GTF, GTF Secondary curve and CVT are not
> -	 * supported
> +	 * These limits are used to determine the VRR refresh
> +	 * rate range. Only the "range limits only" variant
> +	 * of the range descriptor seems to guarantee that
> +	 * any and all timings are accepted by the sink, as
> +	 * opposed to just timings conforming to the indicated
> +	 * formula (GTF/GTF2/CVT). Thus other variants of the
> +	 * range descriptor are not accepted here.
>  	 */
>  	if (range->flags != DRM_EDID_RANGE_LIMITS_ONLY_FLAG)
>  		return;
> -- 
> 2.35.1
>