[Intel-gfx] [PATCH v2 09/41] drm/connector: Add TV standard property
Maxime Ripard
maxime at cerno.tech
Mon Aug 29 13:11:23 UTC 2022
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new bitmask tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports.
We'll then be able to phase out the older tv mode property.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
diff --git a/drivers/gpu/drm/drm_atomic_uapi.c b/drivers/gpu/drm/drm_atomic_uapi.c
index 7f2b9a07fbdf..d867e7f9f2cd 100644
--- a/drivers/gpu/drm/drm_atomic_uapi.c
+++ b/drivers/gpu/drm/drm_atomic_uapi.c
@@ -700,6 +700,8 @@ static int drm_atomic_connector_set_property(struct drm_connector *connector,
state->tv.margins.bottom = val;
} else if (property == config->legacy_tv_mode_property) {
state->tv.legacy_mode = val;
+ } else if (property == config->tv_mode_property) {
+ state->tv.mode = val;
} else if (property == config->tv_brightness_property) {
state->tv.brightness = val;
} else if (property == config->tv_contrast_property) {
@@ -810,6 +812,8 @@ drm_atomic_connector_get_property(struct drm_connector *connector,
*val = state->tv.margins.bottom;
} else if (property == config->legacy_tv_mode_property) {
*val = state->tv.legacy_mode;
+ } else if (property == config->tv_mode_property) {
+ *val = state->tv.mode;
} else if (property == config->tv_brightness_property) {
*val = state->tv.brightness;
} else if (property == config->tv_contrast_property) {
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 4e4fbc9e0049..b1fcacd150e8 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -980,6 +980,29 @@ static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
drm_dvi_i_subconnector_enum_list)
+static const struct drm_prop_enum_list drm_tv_mode_enum_list[] = {
+ { DRM_MODE_TV_MODE_NTSC_443, "NTSC-443" },
+ { DRM_MODE_TV_MODE_NTSC_J, "NTSC-J" },
+ { DRM_MODE_TV_MODE_NTSC_M, "NTSC-M" },
+ { DRM_MODE_TV_MODE_PAL_60, "PAL-60" },
+ { DRM_MODE_TV_MODE_PAL_B, "PAL-B" },
+ { DRM_MODE_TV_MODE_PAL_D, "PAL-D" },
+ { DRM_MODE_TV_MODE_PAL_G, "PAL-G" },
+ { DRM_MODE_TV_MODE_PAL_H, "PAL-H" },
+ { DRM_MODE_TV_MODE_PAL_I, "PAL-I" },
+ { DRM_MODE_TV_MODE_PAL_M, "PAL-M" },
+ { DRM_MODE_TV_MODE_PAL_N, "PAL-N" },
+ { DRM_MODE_TV_MODE_PAL_NC, "PAL-Nc" },
+ { DRM_MODE_TV_MODE_SECAM_60, "SECAM-60" },
+ { DRM_MODE_TV_MODE_SECAM_B, "SECAM-B" },
+ { DRM_MODE_TV_MODE_SECAM_D, "SECAM-D" },
+ { DRM_MODE_TV_MODE_SECAM_G, "SECAM-G" },
+ { DRM_MODE_TV_MODE_SECAM_K, "SECAM-K" },
+ { DRM_MODE_TV_MODE_SECAM_K1, "SECAM-K1" },
+ { DRM_MODE_TV_MODE_SECAM_L, "SECAM-L" },
+};
+DRM_ENUM_NAME_FN(drm_get_tv_mode_name, drm_tv_mode_enum_list)
+
static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
{ DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
{ DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
@@ -1645,6 +1668,10 @@ EXPORT_SYMBOL(drm_mode_create_tv_margin_properties);
* responsible for allocating a list of format names and passing them to
* this routine.
*
+ * NOTE: This functions registers the deprecated "mode" connector
+ * property to select the analog TV mode (ie, NTSC, PAL, etc.). New
+ * drivers must use drm_mode_create_tv_properties() instead.
+ *
* Returns:
* 0 on success or a negative error code on failure.
*/
@@ -1686,7 +1713,6 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
if (drm_mode_create_tv_margin_properties(dev))
goto nomem;
-
if (num_modes) {
dev->mode_config.legacy_tv_mode_property =
drm_property_create(dev, DRM_MODE_PROP_ENUM,
@@ -1735,6 +1761,46 @@ int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
}
EXPORT_SYMBOL(drm_mode_create_tv_properties_legacy);
+/**
+ * drm_mode_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @supported_tv_modes: Bitmask of TV modes supported (See DRM_MODE_TV_MODE_*)
+
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device. Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes)
+{
+ struct drm_prop_enum_list tv_mode_list[DRM_MODE_TV_MODE_MAX];
+ struct drm_property *tv_mode;
+ unsigned int i, len = 0;
+
+ for (i = 0; i < DRM_MODE_TV_MODE_MAX; i++) {
+ if (!(supported_tv_modes & BIT(i)))
+ continue;
+
+ tv_mode_list[len].type = i;
+ tv_mode_list[len].name = drm_get_tv_mode_name(i);
+ len++;
+ }
+
+ tv_mode = drm_property_create_enum(dev, 0, "TV mode",
+ tv_mode_list, len);
+ if (!tv_mode)
+ return -ENOMEM;
+
+ dev->mode_config.tv_mode_property = tv_mode;
+
+ return drm_mode_create_tv_properties_legacy(dev, 0, NULL);
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
/**
* drm_mode_create_scaling_mode_property - create scaling mode property
* @dev: DRM device
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index d566b4a4709c..7d3881f35e7c 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -143,6 +143,144 @@ enum subpixel_order {
};
+/**
+ * enum drm_connector_tv_mode - Analog TV output mode
+ *
+ * This enum is used to indicate the TV output mode used on an analog TV
+ * connector.
+ *
+ * WARNING: The values of this enum is uABI since they're exposed in the
+ * "TV mode" connector property.
+ */
+enum drm_connector_tv_mode {
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_443: Variant of
+ * @DRM_MODE_TV_MODE_NTSC_M. Uses a color subcarrier frequency
+ * of 4.43 MHz.
+ */
+ DRM_MODE_TV_MODE_NTSC_443 = 0,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_J: Variant of @DRM_MODE_TV_MODE_NTSC_M
+ * used in Japan. Uses a black level equals to the blanking
+ * level.
+ */
+ DRM_MODE_TV_MODE_NTSC_J,
+
+ /**
+ * @DRM_MODE_TV_MODE_NTSC_M: CCIR System M (aka 525-lines)
+ * together with the NTSC Color Encoding.
+ */
+ DRM_MODE_TV_MODE_NTSC_M,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_60: CCIR System M (aka 525-lines)
+ * together with the PAL color encoding and color subcarrier
+ * frequency.
+ */
+ DRM_MODE_TV_MODE_PAL_60,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_B: CCIR System B together with the PAL
+ * color system.
+ */
+ DRM_MODE_TV_MODE_PAL_B,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_D: CCIR System D together with the PAL
+ * color system.
+ */
+ DRM_MODE_TV_MODE_PAL_D,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_G: CCIR System G together with the PAL
+ * color system. Similar to @DRM_MODE_TV_MODE_PAL_B but uses a
+ * different channel bandwidth and transmission band.
+ */
+ DRM_MODE_TV_MODE_PAL_G,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_H: CCIR System H together with the PAL
+ * color system. Similar to @DRM_MODE_TV_MODE_PAL_G but uses a
+ * narrower lower side band.
+ */
+ DRM_MODE_TV_MODE_PAL_H,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_I: CCIR System I together with the PAL
+ * color system. Similar to @DRM_MODE_TV_MODE_PAL_B, but with a
+ * different audio encoding.
+ */
+ DRM_MODE_TV_MODE_PAL_I,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_M: CCIR System M (aka 525-lines)
+ * together with the PAL color encoding
+ */
+ DRM_MODE_TV_MODE_PAL_M,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_N: CCIR System N together with the PAL
+ * color encoding. It uses 625 lines, but has a color subcarrier
+ * frequency of 3.58MHz, the SECAM color space, and narrower
+ * channels compared to most of the other PAL variants.
+ */
+ DRM_MODE_TV_MODE_PAL_N,
+
+ /**
+ * @DRM_MODE_TV_MODE_PAL_NC: Seems equivalent to
+ * @DRM_MODE_TV_MODE_PAL_N.
+ */
+ DRM_MODE_TV_MODE_PAL_NC,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_60: CCIR System M (aka 525-lines)
+ * together with the SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM_60,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_B: CCIR System B together with the
+ * SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM_B,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_D: CCIR System D together with the
+ * SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM_D,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_G: CCIR System G together with the
+ * SECAM color system. Similar to @DRM_MODE_TV_MODE_SECAM_B but
+ * uses a different channel bandwidth and transmission band.
+ */
+ DRM_MODE_TV_MODE_SECAM_G,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_K: CCIR System G together with the
+ * SECAM color system. Similar to @DRM_MODE_TV_MODE_SECAM_G but
+ * with different channels.
+ */
+ DRM_MODE_TV_MODE_SECAM_K,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_K1: CCIR System G together with the
+ * SECAM color system. Similar to @DRM_MODE_TV_MODE_SECAM_G and
+ * @DRM_MODE_TV_MODE_SECAM_K but with different channels.
+ */
+ DRM_MODE_TV_MODE_SECAM_K1,
+
+ /**
+ * @DRM_MODE_TV_MODE_SECAM_L: CCIR System L together with the
+ * SECAM color system.
+ */
+ DRM_MODE_TV_MODE_SECAM_L,
+
+ DRM_MODE_TV_MODE_MAX,
+};
+
/**
* struct drm_scrambling: sink's scrambling support.
*/
@@ -696,6 +834,7 @@ struct drm_connector_tv_margins {
* @subconnector: detected subconnector
* @margins: TV margins
* @legacy_mode: Legacy TV mode, driver specific value
+ * @mode: TV mode
* @brightness: brightness in percent
* @contrast: contrast in percent
* @flicker_reduction: flicker reduction in percent
@@ -708,6 +847,7 @@ struct drm_tv_connector_state {
enum drm_mode_subconnector subconnector;
struct drm_connector_tv_margins margins;
unsigned int legacy_mode;
+ unsigned int mode;
unsigned int brightness;
unsigned int contrast;
unsigned int flicker_reduction;
@@ -1789,6 +1929,7 @@ const char *drm_get_subpixel_order_name(enum subpixel_order order);
const char *drm_get_dpms_name(int val);
const char *drm_get_dvi_i_subconnector_name(int val);
const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_mode_name(int val);
const char *drm_get_tv_subconnector_name(int val);
const char *drm_get_tv_select_name(int val);
const char *drm_get_dp_subconnector_name(int val);
@@ -1802,6 +1943,8 @@ int drm_mode_create_tv_margin_properties(struct drm_device *dev);
int drm_mode_create_tv_properties_legacy(struct drm_device *dev,
unsigned int num_modes,
const char * const modes[]);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int supported_tv_modes);
void drm_connector_attach_tv_margin_properties(struct drm_connector *conn);
int drm_mode_create_scaling_mode_property(struct drm_device *dev);
int drm_connector_attach_content_type_property(struct drm_connector *dev);
diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
index 35a827175c24..10a6f7d1df0d 100644
--- a/include/drm/drm_mode_config.h
+++ b/include/drm/drm_mode_config.h
@@ -718,9 +718,17 @@ struct drm_mode_config {
/**
* @legacy_tv_mode_property: Optional TV property to select
* the output TV mode.
+ *
+ * Superseeded by @tv_mode_property
*/
struct drm_property *legacy_tv_mode_property;
+ /**
+ * @tv_mode_property: Optional TV property to select the TV
+ * standard output on the connector.
+ */
+ struct drm_property *tv_mode_property;
+
/**
* @tv_left_margin_property: Optional TV property to set the left
* margin (expressed in pixels).
--
b4 0.10.0-dev-65ba7
More information about the Intel-gfx
mailing list