[Intel-gfx] [PATCH v2 06/41] drm/connector: Rename legacy TV property
Noralf Trønnes
noralf at tronnes.org
Tue Aug 30 19:27:22 UTC 2022
Den 29.08.2022 15.11, skrev Maxime Ripard:
> The current tv_mode has driver-specific values that don't allow to
>
> easily share code using it, either at the userspace or kernel level.
>
>
>
> Since we're going to introduce a new, generic, property that fit the
>
> same purpose, let's rename this one to legacy_tv_mode to make it
>
> obvious we should move away from it.
>
>
>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
>
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
>
> index 1d5e3cccb9e3..5cfad8b6ad83 100644
>
> --- a/include/drm/drm_connector.h
>
> +++ b/include/drm/drm_connector.h
>
> @@ -695,7 +695,7 @@ struct drm_connector_tv_margins {
>
> * @select_subconnector: selected subconnector
>
> * @subconnector: detected subconnector
>
> * @margins: TV margins
>
> - * @mode: TV mode
>
> + * @legacy_mode: Legacy TV mode, driver specific value
>
> * @brightness: brightness in percent
>
> * @contrast: contrast in percent
>
> * @flicker_reduction: flicker reduction in percent
>
> @@ -707,7 +707,7 @@ struct drm_tv_connector_state {
>
> enum drm_mode_subconnector select_subconnector;
>
> enum drm_mode_subconnector subconnector;
>
> struct drm_connector_tv_margins margins;
>
> - unsigned int mode;
>
> + unsigned int legacy_mode;
I suggest you do a build of the affected drivers after adding this patch
to make sure you have changed all mode -> legacy_mode occurrences
_before_ adding back mode in a later patch.
A simple grep gave me these:
drivers/gpu/drm/vc4/vc4_vec.c:
vc4_vec_tv_modes[state->tv.mode].mode);
drivers/gpu/drm/vc4/vc4_vec.c: vec->tv_mode =
&vc4_vec_tv_modes[conn_state->tv.mode];
drivers/gpu/drm/vc4/vc4_vec.c: vec_mode =
&vc4_vec_tv_modes[conn_state->tv.mode];
drivers/gpu/drm/i915/display/intel_tv.c: int format =
conn_state->tv.mode;
drivers/gpu/drm/i915/display/intel_tv.c:
connector->state->tv.mode = i;
drivers/gpu/drm/i915/display/intel_tv.c: if (old_state->tv.mode
!= new_state->tv.mode ||
drivers/gpu/drm/i915/display/intel_tv.c: state->tv.mode =
initial_mode;
drivers/gpu/drm/i915/display/intel_tv.c:
state->tv.mode);
drivers/gpu/drm/i915/display/intel_sdvo.c: format_map = 1 <<
conn_state->tv.mode;
drivers/gpu/drm/i915/display/intel_sdvo.c: format_map = 1 <<
conn_state->tv.mode;
drivers/gpu/drm/i915/display/intel_sdvo.c: if
(state->tv.mode == intel_sdvo_connector->tv_format_supported[i]) {
drivers/gpu/drm/i915/display/intel_sdvo.c: state->tv.mode =
intel_sdvo_connector->tv_format_supported[val];
drivers/gpu/drm/i915/display/intel_sdvo.c:
intel_sdvo_connector->base.base.state->tv.mode =
intel_sdvo_connector->tv_format_supported[0];
Not so easy to grep for is this in gud:
static unsigned int *gud_connector_tv_state_val(u16 prop, struct
drm_tv_connector_state *state)
{
switch (prop) {
...
case GUD_PROPERTY_TV_MODE:
return &state->mode;
Noralf.
>
> unsigned int brightness;
>
> unsigned int contrast;
>
> unsigned int flicker_reduction;
>
> diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
>
> index 6b5e01295348..35a827175c24 100644
>
> --- a/include/drm/drm_mode_config.h
>
> +++ b/include/drm/drm_mode_config.h
>
> @@ -714,11 +714,13 @@ struct drm_mode_config {
>
> * between different TV connector types.
>
> */
>
> struct drm_property *tv_select_subconnector_property;
>
> +
>
> /**
>
> - * @tv_mode_property: Optional TV property to select
>
> + * @legacy_tv_mode_property: Optional TV property to select
>
> * the output TV mode.
>
> */
>
> - struct drm_property *tv_mode_property;
>
> + struct drm_property *legacy_tv_mode_property;
>
> +
>
> /**
>
> * @tv_left_margin_property: Optional TV property to set the left
>
> * margin (expressed in pixels).
>
>
>
More information about the Intel-gfx
mailing list