[Intel-gfx] [PATCH v1 08/14] drm/i915/dp: Consider output_format while computing dsc bpp for mode_valid

Ankit Nautiyal ankit.k.nautiyal at intel.com
Fri Dec 2 10:10:22 UTC 2022


During modevalid step, the pipe bpp is computed assuming RGB output
format. When checking with DSC, consider the output_format and compute
the input bpp for DSC appropriately.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp.c | 32 +++++++++++++++++++------
 1 file changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 2d7135cfb225..d333583e3894 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -117,7 +117,9 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
 }
 
 static void intel_dp_unset_edid(struct intel_dp *intel_dp);
-static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
+static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp,
+				    enum intel_output_format output_format,
+				    u8 dsc_max_bpc);
 
 /* Is link rate UHBR and thus 128b/132b? */
 bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
@@ -1124,11 +1126,21 @@ intel_dp_mode_valid(struct drm_connector *_connector,
 
 	if (HAS_DSC(dev_priv) &&
 	    drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
+		int pipe_bpp;
+		enum intel_output_format output_format, sink_format;
+		const struct drm_display_info *info = &connector->base.display_info;
+
+		if (drm_mode_is_420_only(info, mode))
+			sink_format = INTEL_OUTPUT_FORMAT_YCBCR420;
+		else
+			sink_format = INTEL_OUTPUT_FORMAT_RGB;
+
+		output_format = intel_dp_output_format(connector, mode, sink_format, true);
 		/*
 		 * TBD pass the connector BPC,
 		 * for now U8_MAX so that max BPC on that platform would be picked
 		 */
-		int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
+		pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, output_format, U8_MAX);
 
 		/*
 		 * Output bpp is stored in 6.4 format so right shift by 4 to get the
@@ -1468,12 +1480,15 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
 	return -EINVAL;
 }
 
-static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
+static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp,
+				    enum intel_output_format output_format,
+				    u8 max_req_bpc)
 {
 	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
 	int i, num_bpc;
 	u8 dsc_bpc[3] = {0};
 	u8 dsc_max_bpc;
+	int pipe_bpp = 0;
 
 	/* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
 	if (DISPLAY_VER(i915) >= 12)
@@ -1484,11 +1499,13 @@ static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
 	num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
 						       dsc_bpc);
 	for (i = 0; i < num_bpc; i++) {
-		if (dsc_max_bpc >= dsc_bpc[i])
-			return dsc_bpc[i] * 3;
+		if (dsc_max_bpc >= dsc_bpc[i]) {
+			pipe_bpp = dsc_bpc[i] * 3;
+			break;
+		}
 	}
 
-	return 0;
+	return intel_dp_output_bpp(output_format, pipe_bpp);
 }
 
 static int intel_dp_source_dsc_version_minor(struct intel_dp *intel_dp)
@@ -1587,7 +1604,8 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 	if (!intel_dp_supports_dsc(intel_dp, pipe_config))
 		return -EINVAL;
 
-	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, conn_state->max_requested_bpc);
+	pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, pipe_config->output_format,
+					    conn_state->max_requested_bpc);
 
 	if (intel_dp->force_dsc_bpc) {
 		pipe_bpp = intel_dp->force_dsc_bpc * 3;
-- 
2.25.1



More information about the Intel-gfx mailing list