[Intel-gfx] [PATCH v5 1/2] drm/i915/mtl: limit second scaler vertical scaling in ver >= 14
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Dec 20 11:09:20 UTC 2022
On Tue, Dec 20, 2022 at 10:11:16AM +0200, Luca Coelho wrote:
> In newer hardware versions (i.e. display version >= 14), the second
> scaler doesn't support vertical scaling.
>
> The current implementation of the scaling limits is simplified and
> only occurs when the planes are created, so we don't know which scaler
> is being used.
>
> In order to handle separate scaling limits for horizontal and vertical
> scaling, and different limits per scaler, split the checks in two
> phases. We first do a simple check during plane creation and use the
> best-case scenario (because we don't know the scaler that may be used
> at a later point) and then do a more specific check when the scalers
> are actually being set up.
>
> Signed-off-by: Luca Coelho <luciano.coelho at intel.com>
> ---
>
> In v2:
> * fix DRM_PLANE_NO_SCALING renamed macros;
>
> In v3:
> * No changes.
>
> In v4:
> * Got rid of the changes in the general planes max scale code;
> * Added a couple of FIXMEs;
> * Made intel_atomic_setup_scaler() return an int with errors;
>
> In v5:
> * Just resent with a cover letter.
>
> drivers/gpu/drm/i915/display/i9xx_plane.c | 4 +-
> drivers/gpu/drm/i915/display/intel_atomic.c | 83 ++++++++++++++++---
> .../gpu/drm/i915/display/intel_atomic_plane.c | 30 ++++++-
> .../gpu/drm/i915/display/intel_atomic_plane.h | 2 +-
> drivers/gpu/drm/i915/display/intel_cursor.c | 4 +-
> drivers/gpu/drm/i915/display/intel_sprite.c | 20 +----
> .../drm/i915/display/skl_universal_plane.c | 45 +++++-----
> 7 files changed, 128 insertions(+), 60 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/i9xx_plane.c b/drivers/gpu/drm/i915/display/i9xx_plane.c
> index ecaeb7dc196b..390e96f0692b 100644
> --- a/drivers/gpu/drm/i915/display/i9xx_plane.c
> +++ b/drivers/gpu/drm/i915/display/i9xx_plane.c
> @@ -326,9 +326,7 @@ i9xx_plane_check(struct intel_crtc_state *crtc_state,
> if (ret)
> return ret;
>
> - ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
> - DRM_PLANE_NO_SCALING,
> - DRM_PLANE_NO_SCALING,
> + ret = intel_atomic_plane_check_clipping(plane_state, crtc_state, false,
> i9xx_plane_has_windowing(plane));
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c b/drivers/gpu/drm/i915/display/intel_atomic.c
> index 6621aa245caf..bf4761a40675 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic.c
> +++ b/drivers/gpu/drm/i915/display/intel_atomic.c
> @@ -38,6 +38,7 @@
> #include "intel_atomic.h"
> #include "intel_cdclk.h"
> #include "intel_display_types.h"
> +#include "intel_fb.h"
> #include "intel_global_state.h"
> #include "intel_hdcp.h"
> #include "intel_psr.h"
> @@ -310,11 +311,11 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
> kfree(crtc_state);
> }
>
> -static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
> - int num_scalers_need, struct intel_crtc *intel_crtc,
> - const char *name, int idx,
> - struct intel_plane_state *plane_state,
> - int *scaler_id)
> +static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
> + int num_scalers_need, struct intel_crtc *intel_crtc,
> + const char *name, int idx,
> + struct intel_plane_state *plane_state,
> + int *scaler_id)
> {
> struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
> int j;
> @@ -334,7 +335,7 @@ static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_sta
>
> if (drm_WARN(&dev_priv->drm, *scaler_id < 0,
> "Cannot find scaler for %s:%d\n", name, idx))
> - return;
> + return -EBUSY;
>
> /* set scaler mode */
> if (plane_state && plane_state->hw.fb &&
> @@ -375,9 +376,69 @@ static void intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_sta
> mode = SKL_PS_SCALER_MODE_DYN;
> }
>
> + /*
> + * FIXME: we should also check the scaler factors for pfit, so
> + * this shouldn't be tied directly to planes.
> + */
> + if (plane_state && plane_state->hw.fb) {
> + const struct drm_framebuffer *fb = plane_state->hw.fb;
> + struct drm_rect *src = &plane_state->uapi.src;
> + struct drm_rect *dst = &plane_state->uapi.dst;
> + int hscale, vscale, max_vscale, max_hscale;
> +
> + /*
> + * FIXME: When two scalers are needed, but only one of
> + * them needs to downscale, we should make sure that
> + * the one that needs downscaling support is assigned
> + * as the first scaler, so we don't reject downscaling
> + * unnecessarily.
> + */
> +
> + if (DISPLAY_VER(dev_priv) >= 14) {
> + /*
> + * On versions 14 and up, only the first
> + * scaler supports a vertical scaling factor
> + * of more than 1.0, while a horizontal
> + * scaling factor of 3.0 is supported.
> + */
> + max_hscale = 0x30000 - 1;
> + if (*scaler_id == 0)
> + max_vscale = 0x30000 - 1;
> + else
> + max_vscale = 0x10000;
> +
> + } else if (DISPLAY_VER(dev_priv) >= 10 ||
> + !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) {
> + max_hscale = 0x30000 - 1;
> + max_vscale = 0x30000 - 1;
> + } else {
> + max_hscale = 0x20000 - 1;
> + max_vscale = 0x20000 - 1;
> + }
> +
> + /* Check if required scaling is within limits */
> + hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale);
> + vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale);
> +
> + if (hscale < 0 || vscale < 0) {
> + drm_dbg_kms(&dev_priv->drm,
> + "Scaler %d doesn't support required plane scaling\n",
> + *scaler_id);
> + drm_rect_debug_print("src: ", src, true);
> + drm_rect_debug_print("dst: ", dst, false);
> +
> + scaler_state->scalers[*scaler_id].in_use = 0;
> + *scaler_id = -1;
> +
> + return -EOPNOTSUPP;
> + }
> + }
> +
> drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n",
> intel_crtc->pipe, *scaler_id, name, idx);
> scaler_state->scalers[*scaler_id].mode = mode;
> +
> + return 0;
> }
>
> /**
> @@ -437,7 +498,7 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
> for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
> int *scaler_id;
> const char *name;
> - int idx;
> + int idx, ret;
>
> /* skip if scaler not required */
> if (!(scaler_state->scaler_users & (1 << i)))
> @@ -494,9 +555,11 @@ int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
> scaler_id = &plane_state->scaler_id;
> }
>
> - intel_atomic_setup_scaler(scaler_state, num_scalers_need,
> - intel_crtc, name, idx,
> - plane_state, scaler_id);
> + ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need,
> + intel_crtc, name, idx,
> + plane_state, scaler_id);
> + if (ret)
> + return ret;
> }
>
> return 0;
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> index 10e1fc9d0698..50a05ccd2dda 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> @@ -887,7 +887,7 @@ void intel_crtc_planes_update_arm(struct intel_atomic_state *state,
>
> int intel_atomic_plane_check_clipping(struct intel_plane_state *plane_state,
> struct intel_crtc_state *crtc_state,
> - int min_scale, int max_scale,
> + bool allow_scaling,
> bool can_position)
> {
> struct drm_i915_private *i915 = to_i915(plane_state->uapi.plane->dev);
> @@ -897,19 +897,41 @@ int intel_atomic_plane_check_clipping(struct intel_plane_state *plane_state,
> const struct drm_rect *clip = &crtc_state->pipe_src;
> unsigned int rotation = plane_state->hw.rotation;
> int hscale, vscale;
> + int max_hscale, min_hscale, max_vscale, min_vscale;
>
> if (!fb) {
> plane_state->uapi.visible = false;
> return 0;
> }
>
> + /*
> + * At this point we don't really know the HW limitations, so
> + * we just sanitize the values against the maximum supported
> + * scaling.
> + */
> + if (!allow_scaling) {
> + min_hscale = DRM_PLANE_NO_SCALING;
> + max_hscale = DRM_PLANE_NO_SCALING;
> + min_vscale = DRM_PLANE_NO_SCALING;
> + max_vscale = DRM_PLANE_NO_SCALING;
> + } else {
> + skl_plane_max_scale(i915, fb,
> + &max_hscale, &min_hscale,
> + &max_vscale, &min_vscale);
> + }
This stuff is still broken for pre-skl. Please just drop all
the changes to intel_atomic_plane_check_clipping().
> +
> drm_rect_rotate(src, fb->width << 16, fb->height << 16, rotation);
>
> /* Check scaling */
> - hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
> - vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
> + hscale = drm_rect_calc_hscale(src, dst, min_hscale, max_hscale);
> + vscale = drm_rect_calc_vscale(src, dst, min_vscale, max_vscale);
> if (hscale < 0 || vscale < 0) {
> - drm_dbg_kms(&i915->drm, "Invalid scaling of plane\n");
> + drm_dbg_kms(&i915->drm,
> + "Invalid scaling of plane: hscale 0x%x vscale 0x%x\n",
> + hscale, vscale);
> + drm_dbg_kms(&i915->drm,
> + "min_hscale 0x%0x max_hscale 0x%0x min_vscale 0x%0x max_vscale 0x%0x\n",
> + min_hscale, max_hscale, min_vscale, max_vscale);
> drm_rect_debug_print("src: ", src, true);
> drm_rect_debug_print("dst: ", dst, false);
> return -ERANGE;
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.h b/drivers/gpu/drm/i915/display/intel_atomic_plane.h
> index 74b6d3b169a7..441ef8165212 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.h
> +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.h
> @@ -60,7 +60,7 @@ int intel_plane_calc_min_cdclk(struct intel_atomic_state *state,
> bool *need_cdclk_calc);
> int intel_atomic_plane_check_clipping(struct intel_plane_state *plane_state,
> struct intel_crtc_state *crtc_state,
> - int min_scale, int max_scale,
> + bool check_scaling,
> bool can_position);
> void intel_plane_set_invisible(struct intel_crtc_state *crtc_state,
> struct intel_plane_state *plane_state);
> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c
> index d190fa0d393b..741ec74f54f6 100644
> --- a/drivers/gpu/drm/i915/display/intel_cursor.c
> +++ b/drivers/gpu/drm/i915/display/intel_cursor.c
> @@ -144,9 +144,7 @@ static int intel_check_cursor(struct intel_crtc_state *crtc_state,
> }
>
> ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
> - DRM_PLANE_NO_SCALING,
> - DRM_PLANE_NO_SCALING,
> - true);
> + false, true);
> if (ret)
> return ret;
>
> diff --git a/drivers/gpu/drm/i915/display/intel_sprite.c b/drivers/gpu/drm/i915/display/intel_sprite.c
> index e6b4d24b9cd0..4aa247e190a5 100644
> --- a/drivers/gpu/drm/i915/display/intel_sprite.c
> +++ b/drivers/gpu/drm/i915/display/intel_sprite.c
> @@ -1355,22 +1355,12 @@ g4x_sprite_check(struct intel_crtc_state *crtc_state,
> {
> struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
> struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> - int min_scale = DRM_PLANE_NO_SCALING;
> - int max_scale = DRM_PLANE_NO_SCALING;
> int ret;
>
> - if (g4x_fb_scalable(plane_state->hw.fb)) {
> - if (DISPLAY_VER(dev_priv) < 7) {
> - min_scale = 1;
> - max_scale = 16 << 16;
> - } else if (IS_IVYBRIDGE(dev_priv)) {
> - min_scale = 1;
> - max_scale = 2 << 16;
> - }
> - }
> -
> ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
> - min_scale, max_scale, true);
> + g4x_fb_scalable(plane_state->hw.fb) &&
> + DISPLAY_VER,
> + true);
> if (ret)
> return ret;
>
> @@ -1426,9 +1416,7 @@ vlv_sprite_check(struct intel_crtc_state *crtc_state,
> return ret;
>
> ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
> - DRM_PLANE_NO_SCALING,
> - DRM_PLANE_NO_SCALING,
> - true);
> + false, true);
> if (ret)
> return ret;
>
> diff --git a/drivers/gpu/drm/i915/display/skl_universal_plane.c b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> index 76490cc59d8f..c3e6e45a0d4b 100644
> --- a/drivers/gpu/drm/i915/display/skl_universal_plane.c
> +++ b/drivers/gpu/drm/i915/display/skl_universal_plane.c
> @@ -388,6 +388,25 @@ static int glk_plane_max_width(const struct drm_framebuffer *fb,
> }
> }
>
> +static void skl_plane_max_scale(struct drm_i915_private *i915,
> + struct drm_framebuffer *fb,
> + int *max_hscale, int *min_hscale,
> + int *max_vscale, int *min_vscale)
> +{
> + *min_vscale = 1;
> + *min_hscale = 1;
> +
> + if (DISPLAY_VER(i915) < 10 ||
> + intel_format_info_is_yuv_semiplanar(fb->format,
> + fb->modifier)) {
> + *max_vscale = 0x20000 - 1;
> + *max_hscale = 0x20000 - 1;
> + } else {
> + *max_vscale = 0x30000 - 1;
> + *max_hscale = 0x30000 - 1;
> + }
> +}
> +
> static int icl_plane_min_width(const struct drm_framebuffer *fb,
> int color_plane,
> unsigned int rotation)
> @@ -1463,22 +1482,6 @@ static int skl_plane_check_nv12_rotation(const struct intel_plane_state *plane_s
> return 0;
> }
>
> -static int skl_plane_max_scale(struct drm_i915_private *dev_priv,
> - const struct drm_framebuffer *fb)
> -{
> - /*
> - * We don't yet know the final source width nor
> - * whether we can use the HQ scaler mode. Assume
> - * the best case.
> - * FIXME need to properly check this later.
> - */
> - if (DISPLAY_VER(dev_priv) >= 10 ||
> - !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier))
> - return 0x30000 - 1;
> - else
> - return 0x20000 - 1;
> -}
> -
> static int intel_plane_min_width(struct intel_plane *plane,
> const struct drm_framebuffer *fb,
> int color_plane,
> @@ -1862,8 +1865,7 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
> struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
> struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
> const struct drm_framebuffer *fb = plane_state->hw.fb;
> - int min_scale = DRM_PLANE_NO_SCALING;
> - int max_scale = DRM_PLANE_NO_SCALING;
> + bool allow_scaling;
> int ret;
>
> ret = skl_plane_check_fb(crtc_state, plane_state);
> @@ -1871,13 +1873,10 @@ static int skl_plane_check(struct intel_crtc_state *crtc_state,
> return ret;
>
> /* use scaler when colorkey is not required */
> - if (!plane_state->ckey.flags && skl_fb_scalable(fb)) {
> - min_scale = 1;
> - max_scale = skl_plane_max_scale(dev_priv, fb);
> - }
> + allow_scaling = !plane_state->ckey.flags && skl_fb_scalable(fb);
>
> ret = intel_atomic_plane_check_clipping(plane_state, crtc_state,
> - min_scale, max_scale, true);
> + allow_scaling, true);
> if (ret)
> return ret;
>
> --
> 2.38.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list