[Intel-gfx] [RFC PATCH 14/20] drm/i915/display: Remove all uncore mmio accesses in favor of intel_de
Matthew Brost
matthew.brost at intel.com
Thu Dec 22 22:21:21 UTC 2022
From: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
---
drivers/gpu/drm/i915/display/hsw_ips.c | 7 ++-
drivers/gpu/drm/i915/display/intel_bios.c | 25 ++++++-----
drivers/gpu/drm/i915/display/intel_bw.c | 34 +++++++-------
drivers/gpu/drm/i915/display/intel_cdclk.c | 45 +++++++++----------
drivers/gpu/drm/i915/display/intel_display.c | 1 -
.../drm/i915/display/intel_display_power.c | 3 +-
.../i915/display/intel_display_power_well.c | 7 ++-
drivers/gpu/drm/i915/display/intel_dpio_phy.c | 9 ++--
drivers/gpu/drm/i915/display/intel_hdcp.c | 9 ++--
drivers/gpu/drm/i915/display/intel_hdmi.c | 1 -
drivers/gpu/drm/i915/display/skl_watermark.c | 23 +++++-----
11 files changed, 78 insertions(+), 86 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/hsw_ips.c b/drivers/gpu/drm/i915/display/hsw_ips.c
index 83aa3800245f..b2253f7cfc00 100644
--- a/drivers/gpu/drm/i915/display/hsw_ips.c
+++ b/drivers/gpu/drm/i915/display/hsw_ips.c
@@ -8,7 +8,6 @@
#include "i915_reg.h"
#include "intel_de.h"
#include "intel_display_types.h"
-#include "intel_pcode.h"
static void hsw_ips_enable(const struct intel_crtc_state *crtc_state)
{
@@ -28,8 +27,8 @@ static void hsw_ips_enable(const struct intel_crtc_state *crtc_state)
if (IS_BROADWELL(i915)) {
drm_WARN_ON(&i915->drm,
- snb_pcode_write(&i915->uncore, DISPLAY_IPS_CONTROL,
- IPS_ENABLE | IPS_PCODE_CONTROL));
+ intel_de_pcode_write(i915, DISPLAY_IPS_CONTROL,
+ IPS_ENABLE | IPS_PCODE_CONTROL));
/*
* Quoting Art Runyan: "its not safe to expect any particular
* value in IPS_CTL bit 31 after enabling IPS through the
@@ -62,7 +61,7 @@ bool hsw_ips_disable(const struct intel_crtc_state *crtc_state)
if (IS_BROADWELL(i915)) {
drm_WARN_ON(&i915->drm,
- snb_pcode_write(&i915->uncore, DISPLAY_IPS_CONTROL, 0));
+ intel_de_pcode_write(i915, DISPLAY_IPS_CONTROL, 0));
/*
* Wait for PCODE to finish disabling IPS. The BSpec specified
* 42ms timeout value leads to occasional timeouts so use 100ms
diff --git a/drivers/gpu/drm/i915/display/intel_bios.c b/drivers/gpu/drm/i915/display/intel_bios.c
index 55544d484318..755e56f9db6c 100644
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -29,9 +29,10 @@
#include <drm/display/drm_dp_helper.h>
#include <drm/display/drm_dsc_helper.h>
-#include "display/intel_display.h"
-#include "display/intel_display_types.h"
-#include "display/intel_gmbus.h"
+#include "intel_de.h"
+#include "intel_display.h"
+#include "intel_display_types.h"
+#include "intel_gmbus.h"
#include "i915_drv.h"
#include "i915_reg.h"
@@ -3001,16 +3002,16 @@ static struct vbt_header *spi_oprom_get_vbt(struct drm_i915_private *i915)
u16 vbt_size;
u32 *vbt;
- static_region = intel_uncore_read(&i915->uncore, SPI_STATIC_REGIONS);
+ static_region = intel_de_read(i915, SPI_STATIC_REGIONS);
static_region &= OPTIONROM_SPI_REGIONID_MASK;
- intel_uncore_write(&i915->uncore, PRIMARY_SPI_REGIONID, static_region);
+ intel_de_write(i915, PRIMARY_SPI_REGIONID, static_region);
- oprom_offset = intel_uncore_read(&i915->uncore, OROM_OFFSET);
+ oprom_offset = intel_de_read(i915, OROM_OFFSET);
oprom_offset &= OROM_OFFSET_MASK;
for (count = 0; count < oprom_size; count += 4) {
- intel_uncore_write(&i915->uncore, PRIMARY_SPI_ADDRESS, oprom_offset + count);
- data = intel_uncore_read(&i915->uncore, PRIMARY_SPI_TRIGGER);
+ intel_de_write(i915, PRIMARY_SPI_ADDRESS, oprom_offset + count);
+ data = intel_de_read(i915, PRIMARY_SPI_TRIGGER);
if (data == *((const u32 *)"$VBT")) {
found = oprom_offset + count;
@@ -3022,9 +3023,9 @@ static struct vbt_header *spi_oprom_get_vbt(struct drm_i915_private *i915)
goto err_not_found;
/* Get VBT size and allocate space for the VBT */
- intel_uncore_write(&i915->uncore, PRIMARY_SPI_ADDRESS, found +
+ intel_de_write(i915, PRIMARY_SPI_ADDRESS, found +
offsetof(struct vbt_header, vbt_size));
- vbt_size = intel_uncore_read(&i915->uncore, PRIMARY_SPI_TRIGGER);
+ vbt_size = intel_de_read(i915, PRIMARY_SPI_TRIGGER);
vbt_size &= 0xffff;
vbt = kzalloc(round_up(vbt_size, 4), GFP_KERNEL);
@@ -3032,8 +3033,8 @@ static struct vbt_header *spi_oprom_get_vbt(struct drm_i915_private *i915)
goto err_not_found;
for (count = 0; count < vbt_size; count += 4) {
- intel_uncore_write(&i915->uncore, PRIMARY_SPI_ADDRESS, found + count);
- data = intel_uncore_read(&i915->uncore, PRIMARY_SPI_TRIGGER);
+ intel_de_write(i915, PRIMARY_SPI_ADDRESS, found + count);
+ data = intel_de_read(i915, PRIMARY_SPI_TRIGGER);
*(vbt + store++) = data;
}
diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
index 1c236f02b380..54e03a3eaa0f 100644
--- a/drivers/gpu/drm/i915/display/intel_bw.c
+++ b/drivers/gpu/drm/i915/display/intel_bw.c
@@ -11,11 +11,11 @@
#include "intel_atomic.h"
#include "intel_bw.h"
#include "intel_cdclk.h"
+#include "intel_de.h"
#include "intel_display_core.h"
#include "intel_display_types.h"
#include "skl_watermark.h"
#include "intel_mchbar_regs.h"
-#include "intel_pcode.h"
/* Parameters for Qclk Geyserville (QGV) */
struct intel_qgv_point {
@@ -44,7 +44,7 @@ static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv,
u32 dclk_ratio, dclk_reference;
u32 val;
- val = intel_uncore_read(&dev_priv->uncore, SA_PERF_STATUS_0_0_0_MCHBAR_PC);
+ val = intel_de_read(dev_priv, SA_PERF_STATUS_0_0_0_MCHBAR_PC);
dclk_ratio = REG_FIELD_GET(DG1_QCLK_RATIO_MASK, val);
if (val & DG1_QCLK_REFERENCE)
dclk_reference = 6; /* 6 * 16.666 MHz = 100 MHz */
@@ -52,18 +52,18 @@ static int dg1_mchbar_read_qgv_point_info(struct drm_i915_private *dev_priv,
dclk_reference = 8; /* 8 * 16.666 MHz = 133 MHz */
sp->dclk = DIV_ROUND_UP((16667 * dclk_ratio * dclk_reference) + 500, 1000);
- val = intel_uncore_read(&dev_priv->uncore, SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
+ val = intel_de_read(dev_priv, SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
if (val & DG1_GEAR_TYPE)
sp->dclk *= 2;
if (sp->dclk == 0)
return -EINVAL;
- val = intel_uncore_read(&dev_priv->uncore, MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR);
+ val = intel_de_read(dev_priv, MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR);
sp->t_rp = REG_FIELD_GET(DG1_DRAM_T_RP_MASK, val);
sp->t_rdpre = REG_FIELD_GET(DG1_DRAM_T_RDPRE_MASK, val);
- val = intel_uncore_read(&dev_priv->uncore, MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR_HIGH);
+ val = intel_de_read(dev_priv, MCHBAR_CH0_CR_TC_PRE_0_0_0_MCHBAR_HIGH);
sp->t_rcd = REG_FIELD_GET(DG1_DRAM_T_RCD_MASK, val);
sp->t_ras = REG_FIELD_GET(DG1_DRAM_T_RAS_MASK, val);
@@ -80,9 +80,9 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
u16 dclk;
int ret;
- ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
- ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point),
- &val, &val2);
+ ret = intel_de_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
+ ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point),
+ &val, &val2);
if (ret)
return ret;
@@ -106,8 +106,8 @@ static int adls_pcode_read_psf_gv_point_info(struct drm_i915_private *dev_priv,
int ret;
int i;
- ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
- ADL_PCODE_MEM_SS_READ_PSF_GV_INFO, &val, NULL);
+ ret = intel_de_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
+ ADL_PCODE_MEM_SS_READ_PSF_GV_INFO, &val, NULL);
if (ret)
return ret;
@@ -125,11 +125,11 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
int ret;
/* bspec says to keep retrying for at least 1 ms */
- ret = skl_pcode_request(&dev_priv->uncore, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
- points_mask,
- ICL_PCODE_REP_QGV_MASK | ADLS_PCODE_REP_PSF_MASK,
- ICL_PCODE_REP_QGV_SAFE | ADLS_PCODE_REP_PSF_SAFE,
- 1);
+ ret = intel_de_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
+ points_mask,
+ ICL_PCODE_REP_QGV_MASK | ADLS_PCODE_REP_PSF_MASK,
+ ICL_PCODE_REP_QGV_SAFE | ADLS_PCODE_REP_PSF_SAFE,
+ 1);
if (ret < 0) {
drm_err(&dev_priv->drm, "Failed to disable qgv points (%d) points: 0x%x\n", ret, points_mask);
@@ -145,9 +145,9 @@ static int mtl_read_qgv_point_info(struct drm_i915_private *dev_priv,
u32 val, val2;
u16 dclk;
- val = intel_uncore_read(&dev_priv->uncore,
+ val = intel_de_read(dev_priv,
MTL_MEM_SS_INFO_QGV_POINT_LOW(point));
- val2 = intel_uncore_read(&dev_priv->uncore,
+ val2 = intel_de_read(dev_priv,
MTL_MEM_SS_INFO_QGV_POINT_HIGH(point));
dclk = REG_FIELD_GET(MTL_DCLK_MASK, val);
sp->dclk = DIV_ROUND_UP((16667 * dclk), 1000);
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 0c107a38f9d0..80e2db6b5ea4 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -35,7 +35,6 @@
#include "intel_display_types.h"
#include "intel_mchbar_regs.h"
#include "intel_pci_config.h"
-#include "intel_pcode.h"
#include "intel_psr.h"
#include "vlv_sideband.h"
@@ -801,7 +800,7 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
"trying to change cdclk frequency with cdclk not enabled\n"))
return;
- ret = snb_pcode_write(&dev_priv->uncore, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
+ ret = intel_de_pcode_write(dev_priv, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
if (ret) {
drm_err(&dev_priv->drm,
"failed to inform pcode about cdclk change\n");
@@ -829,8 +828,8 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
- snb_pcode_write(&dev_priv->uncore, HSW_PCODE_DE_WRITE_FREQ_REQ,
- cdclk_config->voltage_level);
+ intel_de_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
+ cdclk_config->voltage_level);
intel_de_write(dev_priv, CDCLK_FREQ,
DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
@@ -1087,10 +1086,10 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
drm_WARN_ON_ONCE(&dev_priv->drm,
IS_SKYLAKE(dev_priv) && vco == 8640000);
- ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
- SKL_CDCLK_PREPARE_FOR_CHANGE,
- SKL_CDCLK_READY_FOR_CHANGE,
- SKL_CDCLK_READY_FOR_CHANGE, 3);
+ ret = intel_de_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ SKL_CDCLK_PREPARE_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE, 3);
if (ret) {
drm_err(&dev_priv->drm,
"Failed to inform PCU about cdclk change (%d)\n", ret);
@@ -1133,8 +1132,8 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
intel_de_posting_read(dev_priv, CDCLK_CTL);
/* inform PCU of the change */
- snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
- cdclk_config->voltage_level);
+ intel_de_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ cdclk_config->voltage_level);
intel_update_cdclk(dev_priv);
}
@@ -1864,18 +1863,18 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
if (DISPLAY_VER(dev_priv) >= 14)
/* NOOP */;
else if (DISPLAY_VER(dev_priv) >= 11)
- ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
- SKL_CDCLK_PREPARE_FOR_CHANGE,
- SKL_CDCLK_READY_FOR_CHANGE,
- SKL_CDCLK_READY_FOR_CHANGE, 3);
+ ret = intel_de_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ SKL_CDCLK_PREPARE_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE,
+ SKL_CDCLK_READY_FOR_CHANGE, 3);
else
/*
* BSpec requires us to wait up to 150usec, but that leads to
* timeouts; the 2ms used here is based on experiment.
*/
- ret = snb_pcode_write_timeout(&dev_priv->uncore,
- HSW_PCODE_DE_WRITE_FREQ_REQ,
- 0x80000000, 150, 2);
+ ret = intel_de_pcode_write_timeout(dev_priv,
+ HSW_PCODE_DE_WRITE_FREQ_REQ,
+ 0x80000000, 150, 2);
if (ret) {
drm_err(&dev_priv->drm,
@@ -1898,8 +1897,8 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
* Display versions 14 and beyond
*/;
else if (DISPLAY_VER(dev_priv) >= 11)
- ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
- cdclk_config->voltage_level);
+ ret = intel_de_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
+ cdclk_config->voltage_level);
else
/*
* The timeout isn't specified, the 2ms used here is based on
@@ -1907,10 +1906,10 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
* FIXME: Waiting for the request completion could be delayed
* until the next PCODE request based on BSpec.
*/
- ret = snb_pcode_write_timeout(&dev_priv->uncore,
- HSW_PCODE_DE_WRITE_FREQ_REQ,
- cdclk_config->voltage_level,
- 150, 2);
+ ret = intel_de_pcode_write_timeout(dev_priv,
+ HSW_PCODE_DE_WRITE_FREQ_REQ,
+ cdclk_config->voltage_level,
+ 150, 2);
if (ret) {
drm_err(&dev_priv->drm,
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 7a6191cad52a..ef9bab4043ee 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -105,7 +105,6 @@
#include "intel_panel.h"
#include "intel_pch_display.h"
#include "intel_pch_refclk.h"
-#include "intel_pcode.h"
#include "intel_pipe_crc.h"
#include "intel_plane_initial.h"
#include "intel_pm.h"
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 1a23ecd4623a..fd0fedb65e42 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -18,7 +18,6 @@
#include "intel_dmc.h"
#include "intel_mchbar_regs.h"
#include "intel_pch_refclk.h"
-#include "intel_pcode.h"
#include "intel_snps_phy.h"
#include "skl_watermark.h"
#include "vlv_sideband.h"
@@ -1206,7 +1205,7 @@ static u32 hsw_read_dcomp(struct drm_i915_private *dev_priv)
static void hsw_write_dcomp(struct drm_i915_private *dev_priv, u32 val)
{
if (IS_HASWELL(dev_priv)) {
- if (snb_pcode_write(&dev_priv->uncore, GEN6_PCODE_WRITE_D_COMP, val))
+ if (intel_de_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
drm_dbg_kms(&dev_priv->drm,
"Failed to write to D_COMP\n");
} else {
diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.c b/drivers/gpu/drm/i915/display/intel_display_power_well.c
index 8710dd41ffd4..a1d75956ae97 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power_well.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power_well.c
@@ -18,7 +18,6 @@
#include "intel_dpio_phy.h"
#include "intel_dpll.h"
#include "intel_hotplug.h"
-#include "intel_pcode.h"
#include "intel_pps.h"
#include "intel_tc.h"
#include "intel_vga.h"
@@ -477,8 +476,8 @@ static void icl_tc_cold_exit(struct drm_i915_private *i915)
int ret, tries = 0;
while (1) {
- ret = snb_pcode_write_timeout(&i915->uncore, ICL_PCODE_EXIT_TCCOLD, 0,
- 250, 1);
+ ret = intel_de_pcode_write_timeout(i915, ICL_PCODE_EXIT_TCCOLD, 0,
+ 250, 1);
if (ret != -EAGAIN || ++tries == 3)
break;
msleep(1);
@@ -1740,7 +1739,7 @@ tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
* Spec states that we should timeout the request after 200us
* but the function below will timeout after 500us
*/
- ret = snb_pcode_read(&i915->uncore, TGL_PCODE_TCCOLD, &low_val, &high_val);
+ ret = intel_de_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val, &high_val);
if (ret == 0) {
if (block &&
(low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED))
diff --git a/drivers/gpu/drm/i915/display/intel_dpio_phy.c b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
index 7eb7440b3180..25bea6d2da67 100644
--- a/drivers/gpu/drm/i915/display/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
@@ -401,11 +401,10 @@ static void _bxt_ddi_phy_init(struct drm_i915_private *dev_priv,
* The flag should get set in 100us according to the HW team, but
* use 1ms due to occasional timeouts observed with that.
*/
- if (intel_wait_for_register_fw(&dev_priv->uncore,
- BXT_PORT_CL1CM_DW0(phy),
- PHY_RESERVED | PHY_POWER_GOOD,
- PHY_POWER_GOOD,
- 1))
+ if (intel_de_wait_for_register_fw(dev_priv,
+ BXT_PORT_CL1CM_DW0(phy),
+ PHY_RESERVED | PHY_POWER_GOOD,
+ PHY_POWER_GOOD, 1))
drm_err(&dev_priv->drm, "timeout during PHY%d power on\n",
phy);
diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
index 6406fd487ee5..e62f64dd481f 100644
--- a/drivers/gpu/drm/i915/display/intel_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
@@ -24,7 +24,6 @@
#include "intel_display_types.h"
#include "intel_hdcp.h"
#include "intel_hdcp_regs.h"
-#include "intel_pcode.h"
#define KEY_LOAD_TRIES 5
#define HDCP2_LC_RETRY_CNT 3
@@ -321,7 +320,7 @@ static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv)
* Mailbox interface.
*/
if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) {
- ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_LOAD_HDCP_KEYS, 1);
+ ret = intel_de_pcode_write(dev_priv, SKL_PCODE_LOAD_HDCP_KEYS, 1);
if (ret) {
drm_err(&dev_priv->drm,
"Failed to initiate HDCP key load (%d)\n",
@@ -333,9 +332,9 @@ static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv)
}
/* Wait for the keys to load (500us) */
- ret = __intel_wait_for_register(&dev_priv->uncore, HDCP_KEY_STATUS,
- HDCP_KEY_LOAD_DONE, HDCP_KEY_LOAD_DONE,
- 10, 1, &val);
+ ret = __intel_de_wait_for_register(dev_priv, HDCP_KEY_STATUS,
+ HDCP_KEY_LOAD_DONE, HDCP_KEY_LOAD_DONE,
+ 10, 1, &val);
if (ret)
return ret;
else if (!(val & HDCP_KEY_LOAD_STATUS))
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index efa2da080f62..6d097a11f939 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -40,7 +40,6 @@
#include <drm/drm_edid.h>
#include <drm/intel_lpe_audio.h>
-#include "i915_debugfs.h"
#include "i915_drv.h"
#include "i915_reg.h"
#include "intel_atomic.h"
diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
index ae4e9e680c2e..e254fb21b47f 100644
--- a/drivers/gpu/drm/i915/display/skl_watermark.c
+++ b/drivers/gpu/drm/i915/display/skl_watermark.c
@@ -18,7 +18,6 @@
#include "i915_drv.h"
#include "i915_fixed.h"
#include "i915_reg.h"
-#include "intel_pcode.h"
#include "intel_pm.h"
static void skl_sagv_disable(struct drm_i915_private *i915);
@@ -81,9 +80,9 @@ intel_sagv_block_time(struct drm_i915_private *i915)
u32 val = 0;
int ret;
- ret = snb_pcode_read(&i915->uncore,
- GEN12_PCODE_READ_SAGV_BLOCK_TIME_US,
- &val, NULL);
+ ret = intel_de_pcode_read(i915,
+ GEN12_PCODE_READ_SAGV_BLOCK_TIME_US,
+ &val, NULL);
if (ret) {
drm_dbg_kms(&i915->drm, "Couldn't read SAGV block time!\n");
return 0;
@@ -150,8 +149,8 @@ static void skl_sagv_enable(struct drm_i915_private *i915)
return;
drm_dbg_kms(&i915->drm, "Enabling SAGV\n");
- ret = snb_pcode_write(&i915->uncore, GEN9_PCODE_SAGV_CONTROL,
- GEN9_SAGV_ENABLE);
+ ret = intel_de_pcode_write(i915, GEN9_PCODE_SAGV_CONTROL,
+ GEN9_SAGV_ENABLE);
/* We don't need to wait for SAGV when enabling */
@@ -183,10 +182,10 @@ static void skl_sagv_disable(struct drm_i915_private *i915)
drm_dbg_kms(&i915->drm, "Disabling SAGV\n");
/* bspec says to keep retrying for at least 1 ms */
- ret = skl_pcode_request(&i915->uncore, GEN9_PCODE_SAGV_CONTROL,
- GEN9_SAGV_DISABLE,
- GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
- 1);
+ ret = intel_de_pcode_request(i915, GEN9_PCODE_SAGV_CONTROL,
+ GEN9_SAGV_DISABLE,
+ GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
+ 1);
/*
* Some skl systems, pre-release machines in particular,
* don't actually have SAGV.
@@ -3224,7 +3223,7 @@ static void skl_read_wm_latency(struct drm_i915_private *i915, u16 wm[])
/* read the first set of memory latencies[0:3] */
val = 0; /* data0 to be programmed to 0 for first set */
- ret = snb_pcode_read(&i915->uncore, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL);
+ ret = intel_de_pcode_read(i915, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL);
if (ret) {
drm_err(&i915->drm, "SKL Mailbox read error = %d\n", ret);
return;
@@ -3237,7 +3236,7 @@ static void skl_read_wm_latency(struct drm_i915_private *i915, u16 wm[])
/* read the second set of memory latencies[4:7] */
val = 1; /* data0 to be programmed to 1 for second set */
- ret = snb_pcode_read(&i915->uncore, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL);
+ ret = intel_de_pcode_read(i915, GEN9_PCODE_READ_MEM_LATENCY, &val, NULL);
if (ret) {
drm_err(&i915->drm, "SKL Mailbox read error = %d\n", ret);
return;
--
2.37.3
More information about the Intel-gfx
mailing list