[Intel-gfx] [PATCH] drm/i915: Expand force_probe to block probe of devices as well.
Jani Nikula
jani.nikula at linux.intel.com
Fri Dec 30 12:42:51 UTC 2022
On Fri, 30 Dec 2022, Rodrigo Vivi <rodrigo.vivi at intel.com> wrote:
> On Thu, Dec 29, 2022 at 03:01:34PM -0300, Gustavo Sousa wrote:
>> On Thu, Dec 29, 2022 at 11:12:30AM -0500, Rodrigo Vivi wrote:
>> > There are new cases where we want to block i915 probe, such
>> > as when experimenting or developing the new Xe driver.
>> >
>> > But also, with the new hibrid cards, users or developers might
>> > want to use i915 only on integrated and fully block the probe
>> > of the i915 for the discrete. Or vice versa.
>> >
>> > Oh, and there are even older development and validation reasons,
>> > like when you use some distro where the modprobe.blacklist is
>> > not present.
>> >
>> > But in any case, let's introduce a more granular control, but without
>> > introducing yet another parameter, but using the existent force_probe
>> > one.
>> >
>> > Just by adding a ! in the begin of the id in the force_probe, like
>> > in this case where we would block the probe for Alder Lake:
>> >
>> > $ insmod i915.ko force_probe='!46a6'
>> >
>> > Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
>> > ---
>> > drivers/gpu/drm/i915/Kconfig | 13 ++++++++++---
>> > drivers/gpu/drm/i915/i915_params.c | 2 +-
>> > drivers/gpu/drm/i915/i915_pci.c | 29 +++++++++++++++++++++++++----
>> > 3 files changed, 36 insertions(+), 8 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/Kconfig b/drivers/gpu/drm/i915/Kconfig
>> > index 3efce05d7b57..8873cd0355b7 100644
>> > --- a/drivers/gpu/drm/i915/Kconfig
>> > +++ b/drivers/gpu/drm/i915/Kconfig
>> > @@ -54,24 +54,31 @@ config DRM_I915
>> > If "M" is selected, the module will be called i915.
>> >
>> > config DRM_I915_FORCE_PROBE
>> > - string "Force probe driver for selected new Intel hardware"
>> > + string "Force probe i915 for selected Intel hardware IDs"
>> > depends on DRM_I915
>> > help
>> > This is the default value for the i915.force_probe module
>> > parameter. Using the module parameter overrides this option.
>> >
>> > - Force probe the driver for new Intel graphics devices that are
>> > + Force probe the i915 for Intel graphics devices that are
>> > recognized but not properly supported by this kernel version. It is
>> > recommended to upgrade to a kernel version with proper support as soon
>> > as it is available.
>> >
>> > + It can also be used to block the probe of recognized and fully
>> > + supported devices.
>> > +
>> > Use "" to disable force probe. If in doubt, use this.
>> >
>> > - Use "<pci-id>[,<pci-id>,...]" to force probe the driver for listed
>> > + Use "<pci-id>[,<pci-id>,...]" to force probe the i915 for listed
>> > devices. For example, "4500" or "4500,4571".
>> >
>> > Use "*" to force probe the driver for all known devices.
>> >
>> > + Use "!" right before the ID to block the probe of the device. For
>> > + example, "4500,!4571" forces the probe of 4500 and blocks the probe of
>> > + 4571.
>> > +
>> > config DRM_I915_CAPTURE_ERROR
>> > bool "Enable capturing GPU state following a hang"
>> > depends on DRM_I915
>> > diff --git a/drivers/gpu/drm/i915/i915_params.c b/drivers/gpu/drm/i915/i915_params.c
>> > index 61578f2860cd..d634bd3f641a 100644
>> > --- a/drivers/gpu/drm/i915/i915_params.c
>> > +++ b/drivers/gpu/drm/i915/i915_params.c
>> > @@ -122,7 +122,7 @@ i915_param_named_unsafe(enable_psr2_sel_fetch, bool, 0400,
>> > "Default: 0");
>> >
>> > i915_param_named_unsafe(force_probe, charp, 0400,
>> > - "Force probe the driver for specified devices. "
>> > + "Force probe options for specified supported devices. "
>> > "See CONFIG_DRM_I915_FORCE_PROBE for details.");
>> >
>> > i915_param_named_unsafe(disable_power_well, int, 0400,
>> > diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
>> > index 668e9da52584..fc1383f3a646 100644
>> > --- a/drivers/gpu/drm/i915/i915_pci.c
>> > +++ b/drivers/gpu/drm/i915/i915_pci.c
>> > @@ -1253,7 +1253,7 @@ static void i915_pci_remove(struct pci_dev *pdev)
>> > }
>> >
>> > /* is device_id present in comma separated list of ids */
>> > -static bool force_probe(u16 device_id, const char *devices)
>> > +static bool device_id_in_list(u16 device_id, const char *devices, bool negative)
>> > {
>> > char *s, *p, *tok;
>> > bool ret;
>> > @@ -1272,6 +1272,12 @@ static bool force_probe(u16 device_id, const char *devices)
>> > for (p = s, ret = false; (tok = strsep(&p, ",")) != NULL; ) {
>> > u16 val;
>> >
>> > + if (negative && tok[0] == '!')
>> > + tok++;
>> > + else if ((negative && tok[0] != '!') ||
>> > + (!negative && tok[0] == '!'))
>> > + continue;
>> > +
>> > if (kstrtou16(tok, 16, &val) == 0 && val == device_id) {
>> > ret = true;
>> > break;
>> > @@ -1283,6 +1289,16 @@ static bool force_probe(u16 device_id, const char *devices)
>> > return ret;
>> > }
>> >
>> > +static bool id_forced(u16 device_id)
>> > +{
>> > + return device_id_in_list(device_id, i915_modparams.force_probe, false);
>> > +}
>> > +
>> > +static bool id_blocked(u16 device_id)
>> > +{
>> > + return device_id_in_list(device_id, i915_modparams.force_probe, true);
>> > +}
>>
>> I think id_blocked() would return true for any device id if force_probe was "*".
>
> good catch. I will just wait until middle next week to see if someone has something
> against the idea in general and then re-spin a version with:
>
> - if (strcmp(devices, "*") == 0)
> + if (strcmp(devices, "*") == 0 && !negative)
I admit I didn't bother checking, but please ensure force_probe=!* also
works to block everything.
BR,
Jani.
>
>>
>> > +
>> > bool i915_pci_resource_valid(struct pci_dev *pdev, int bar)
>> > {
>> > if (!pci_resource_flags(pdev, bar))
>> > @@ -1308,10 +1324,9 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>> > (struct intel_device_info *) ent->driver_data;
>> > int err;
>> >
>> > - if (intel_info->require_force_probe &&
>> > - !force_probe(pdev->device, i915_modparams.force_probe)) {
>> > + if (intel_info->require_force_probe && !id_forced(pdev->device)) {
>> > dev_info(&pdev->dev,
>> > - "Your graphics device %04x is not properly supported by the driver in this\n"
>> > + "Your graphics device %04x is not properly supported by i915 in this\n"
>> > "kernel version. To force driver probe anyway, use i915.force_probe=%04x\n"
>> > "module parameter or CONFIG_DRM_I915_FORCE_PROBE=%04x configuration option,\n"
>> > "or (recommended) check for kernel updates.\n",
>> > @@ -1319,6 +1334,12 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>> > return -ENODEV;
>> > }
>> >
>> > + if (id_blocked(pdev->device)) {
>> > + dev_info(&pdev->dev, "I915 probe blocked for Device ID %04x.\n",
>> > + pdev->device);
>> > + return -ENODEV;
>> > + }
>> > +
>> > /* Only bind to function 0 of the device. Early generations
>> > * used function 1 as a placeholder for multi-head. This causes
>> > * us confusion instead, especially on the systems where both
>> > --
>> > 2.38.1
>> >
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list