[Intel-gfx] [RFC 0/5] Add data flow metering support for HDMI2.1

[Vandita Kulkarni]

The below patches add support for data flow metering
as mentioned in the section 6.5.6 FRL data flow metering
of HDMI 2.1 specification.

Add functions to calclulate the DFM parameters
for the given frl config, which is further used to evaluate the
data flow metering requirement as specified in the spec.

As per the spec the below patches implement the frl capacity computation
functions for both compressed and uncompressed video.
Finally exposing 1 function each for compressed and uncompressed video
to figure out if the data flow metering requirement is met or not.

Ankit Nautiyal (1):
  drm/hdmi21: Add support for DFM calculation with DSC

Vandita Kulkarni (4):
  drm/hdmi21: Define frl_dfm structure
  drm/hdmi21: Add non dsc frl capacity computation helpers
  drm/hdmi21: Add helpers to verify non-dsc DFM requirements
  drm/hdmi21: Add frl_dfm_helper to Makefile

 drivers/gpu/drm/Makefile             |   2 +-
 drivers/gpu/drm/drm_frl_dfm_helper.c | 855 +++++++++++++++++++++++++++
 include/drm/drm_frl_dfm_helper.h     | 131 ++++
 3 files changed, 987 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/drm_frl_dfm_helper.c
 create mode 100644 include/drm/drm_frl_dfm_helper.h

-- 
2.32.0