[Intel-gfx] [PATCH 10/10] drm/i915: Change bigjoiner state tracking to use the pipe bitmask
Ville Syrjälä
ville.syrjala at linux.intel.com
Mon Feb 7 07:31:19 UTC 2022
On Fri, Feb 04, 2022 at 03:58:29PM -0800, Navare, Manasi wrote:
> On Thu, Feb 03, 2022 at 08:38:23PM +0200, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Get rid of the inflexible bigjoiner_linked_crtc pointer thing
> > and just track things as a bitmask of pipes instead. We can
> > also nuke the bigjoiner_slave boolean as the role of the pipe
> > can be determined from its position in the bitmask.
> >
> > It might be possible to nuke the bigjoiner boolean as well
> > if we make encoder.compute_config() do the bitmask assignment
> > directly for the master pipe. But for now I left that alone so
> > that encoer.compute_config() will just flag the state as needing
> > bigjoiner, and the intel_atomic_check_bigjoiner() is still
> > responsible for determining the bitmask. But that may have to change
> > as the encoder may be in the best position to determine how
> > exactly we should populate the bitmask.
> >
> > Most places that just looked at the single bigjoiner_linked_crtc
> > now iterate over the whole bitmask, eliminating the singular
> > slave pipe assumption.
>
> Okay so trying to understand the design here:
> For Pipe A + B Bigjoiner and C + D bigjoiner for example,
> bitmasks will be as below:
>
> A : 0011
> B: 0011
>
> C: 1100
> D: 1100
>
> Is this correct understanding? Because we would mark both the master pipe and slave pipe in a bitmask right?
Yes.
>
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > .../gpu/drm/i915/display/intel_atomic_plane.c | 5 +-
> > drivers/gpu/drm/i915/display/intel_ddi.c | 12 +-
> > drivers/gpu/drm/i915/display/intel_display.c | 305 ++++++++++++------
> > drivers/gpu/drm/i915/display/intel_display.h | 2 +
> > .../drm/i915/display/intel_display_debugfs.c | 5 +-
> > .../drm/i915/display/intel_display_types.h | 7 +-
> > .../drm/i915/display/intel_plane_initial.c | 7 -
> > drivers/gpu/drm/i915/display/intel_vdsc.c | 43 ---
> > drivers/gpu/drm/i915/display/intel_vdsc.h | 1 -
> > 9 files changed, 227 insertions(+), 160 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > index 41d52889dfce..0e15fe908855 100644
> > --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> > @@ -404,9 +404,10 @@ int intel_plane_atomic_check(struct intel_atomic_state *state,
> > intel_atomic_get_new_crtc_state(state, crtc);
> >
> > if (new_crtc_state && intel_crtc_is_bigjoiner_slave(new_crtc_state)) {
> > + struct intel_crtc *master_crtc =
> > + intel_master_crtc(new_crtc_state);
> > struct intel_plane *master_plane =
> > - intel_crtc_get_plane(new_crtc_state->bigjoiner_linked_crtc,
> > - plane->id);
> > + intel_crtc_get_plane(master_crtc, plane->id);
> >
> > new_master_plane_state =
> > intel_atomic_get_new_plane_state(state, master_plane);
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index 3f0e1e127595..9dee12986991 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -2703,6 +2703,7 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
> > struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
> > enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
> > bool is_tc_port = intel_phy_is_tc(dev_priv, phy);
> > + struct intel_crtc *slave_crtc;
> >
> > if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST)) {
> > intel_crtc_vblank_off(old_crtc_state);
> > @@ -2721,9 +2722,8 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
> > ilk_pfit_disable(old_crtc_state);
> > }
> >
> > - if (old_crtc_state->bigjoiner_linked_crtc) {
> > - struct intel_crtc *slave_crtc =
> > - old_crtc_state->bigjoiner_linked_crtc;
> > + for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, slave_crtc,
> > + intel_crtc_bigjoiner_slave_pipes(old_crtc_state)) {
> > const struct intel_crtc_state *old_slave_crtc_state =
> > intel_atomic_get_old_crtc_state(state, slave_crtc);
> >
> > @@ -3041,6 +3041,7 @@ intel_ddi_update_prepare(struct intel_atomic_state *state,
> > struct intel_encoder *encoder,
> > struct intel_crtc *crtc)
> > {
> > + struct drm_i915_private *i915 = to_i915(state->base.dev);
> > struct intel_crtc_state *crtc_state =
> > crtc ? intel_atomic_get_new_crtc_state(state, crtc) : NULL;
> > int required_lanes = crtc_state ? crtc_state->lane_count : 1;
> > @@ -3050,11 +3051,12 @@ intel_ddi_update_prepare(struct intel_atomic_state *state,
> > intel_tc_port_get_link(enc_to_dig_port(encoder),
> > required_lanes);
> > if (crtc_state && crtc_state->hw.active) {
> > - struct intel_crtc *slave_crtc = crtc_state->bigjoiner_linked_crtc;
> > + struct intel_crtc *slave_crtc;
> >
> > intel_update_active_dpll(state, crtc, encoder);
> >
> > - if (slave_crtc)
> > + for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc,
> > + intel_crtc_bigjoiner_slave_pipes(crtc_state))
> > intel_update_active_dpll(state, slave_crtc, encoder);
> > }
> > }
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 34b6b4ab3a1b..f5fc283f8f73 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -337,20 +337,38 @@ is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
> > is_trans_port_sync_slave(crtc_state);
> > }
> >
> > +static enum pipe bigjoiner_master_pipe(const struct intel_crtc_state *crtc_state)
> > +{
> > + return ffs(crtc_state->bigjoiner_pipes) - 1;
>
> Here we have both master and slave pipe bits set in a bitmask: This would result in ffs(0011) -1 = 2 which wouldnt be correct?
ffs(0b0011) == 1
<snip>
> > static int intel_atomic_check_bigjoiner(struct intel_atomic_state *state,
> > struct intel_crtc *master_crtc)
> > {
> > struct drm_i915_private *i915 = to_i915(state->base.dev);
> > struct intel_crtc_state *master_crtc_state =
> > intel_atomic_get_new_crtc_state(state, master_crtc);
> > - struct intel_crtc_state *slave_crtc_state;
> > struct intel_crtc *slave_crtc;
> > + u8 slave_pipes;
> >
> > - WARN_ON(master_crtc_state->bigjoiner_linked_crtc);
> > - WARN_ON(intel_crtc_is_bigjoiner_slave(master_crtc_state));
> > + /*
> > + * TODO: encoder.compute_config() may be the best
> > + * place to populate the bitmask for the master crtc.
> > + * For now encoder.compute_config() just flags things
> > + * as needing bigjoiner and we populate the bitmask
> > + * here.
> > + */
> > + WARN_ON(master_crtc_state->bigjoiner_pipes);
> >
> > if (!master_crtc_state->bigjoiner)
> > return 0;
> >
> > - slave_crtc = intel_dsc_get_bigjoiner_secondary(master_crtc);
> > - if (!slave_crtc) {
> > + slave_pipes = BIT(master_crtc->pipe + 1);
> > +
> > + if (slave_pipes & ~bigjoiner_pipes(i915)) {
> > drm_dbg_kms(&i915->drm,
> > - "[CRTC:%d:%s] Big joiner configuration requires "
> > - "CRTC + 1 to be used, doesn't exist\n",
> > + "[CRTC:%d:%s] Cannot act as big joiner master "
> > + "(need 0x%x as slave pipes, only 0x%x possible)\n",
> > + master_crtc->base.base.id, master_crtc->base.name,
> > + slave_pipes, bigjoiner_pipes(i915));
> > + return -EINVAL;
>
> I dont get how we are checking for the invalid slave pipe here?
> slave_pipes = BIT(1) = 0010
> bigjoiner_pipes = 0000 (since we havents et anything in compute config)
bigjoiner_pipes() is a bitmask of pipes that support bigjoiner.
It is constant for the platform.
> so slave_pipes & ~bigjoiner_pipes = 0010 & 1111 = 0010 so the condition will be true
> And then we are flagging it as error why?
If we come here with eg. master == pipe D on TGL then we'd
mark the non-existent pipe E as the slave. This check will
catch that.
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list