[Intel-gfx] [PATCH v2 09/26] drm/i915: Move per-platform power well hooks to intel_display_power_well.c
Imre Deak
imre.deak at intel.com
Tue Feb 8 11:36:39 UTC 2022
Move the implementation of platform specific power well hooks to
intel_display_power_well.c, to reduce the clutter in
intel_display_power.c.
No functional change.
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
.../drm/i915/display/intel_display_power.c | 1759 ----------------
.../i915/display/intel_display_power_well.c | 1817 +++++++++++++++++
.../i915/display/intel_display_power_well.h | 57 +-
3 files changed, 1839 insertions(+), 1794 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 61eaacdac5af2..3414013e7f449 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -7,23 +7,15 @@
#include "i915_irq.h"
#include "intel_cdclk.h"
#include "intel_combo_phy.h"
-#include "intel_combo_phy_regs.h"
-#include "intel_crt.h"
#include "intel_de.h"
#include "intel_display_power.h"
#include "intel_display_power_well.h"
#include "intel_display_types.h"
#include "intel_dmc.h"
-#include "intel_dpio_phy.h"
-#include "intel_dpll.h"
-#include "intel_hotplug.h"
#include "intel_pch_refclk.h"
#include "intel_pcode.h"
#include "intel_pm.h"
-#include "intel_pps.h"
#include "intel_snps_phy.h"
-#include "intel_tc.h"
-#include "intel_vga.h"
#include "vlv_sideband.h"
const char *
@@ -232,604 +224,6 @@ bool intel_display_power_is_enabled(struct drm_i915_private *dev_priv,
return ret;
}
-/*
- * Starting with Haswell, we have a "Power Down Well" that can be turned off
- * when not needed anymore. We have 4 registers that can request the power well
- * to be enabled, and it will only be disabled if none of the registers is
- * requesting it to be enabled.
- */
-static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv,
- u8 irq_pipe_mask, bool has_vga)
-{
- if (has_vga)
- intel_vga_reset_io_mem(dev_priv);
-
- if (irq_pipe_mask)
- gen8_irq_power_well_post_enable(dev_priv, irq_pipe_mask);
-}
-
-static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv,
- u8 irq_pipe_mask)
-{
- if (irq_pipe_mask)
- gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask);
-}
-
-#define ICL_AUX_PW_TO_CH(pw_idx) \
- ((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A)
-
-#define ICL_TBT_AUX_PW_TO_CH(pw_idx) \
- ((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C)
-
-static enum aux_ch icl_aux_pw_to_ch(const struct i915_power_well *power_well)
-{
- int pw_idx = power_well->desc->hsw.idx;
-
- return power_well->desc->hsw.is_tc_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) :
- ICL_AUX_PW_TO_CH(pw_idx);
-}
-
-static struct intel_digital_port *
-aux_ch_to_digital_port(struct drm_i915_private *dev_priv,
- enum aux_ch aux_ch)
-{
- struct intel_digital_port *dig_port = NULL;
- struct intel_encoder *encoder;
-
- for_each_intel_encoder(&dev_priv->drm, encoder) {
- /* We'll check the MST primary port */
- if (encoder->type == INTEL_OUTPUT_DP_MST)
- continue;
-
- dig_port = enc_to_dig_port(encoder);
- if (!dig_port)
- continue;
-
- if (dig_port->aux_ch != aux_ch) {
- dig_port = NULL;
- continue;
- }
-
- break;
- }
-
- return dig_port;
-}
-
-static enum phy icl_aux_pw_to_phy(struct drm_i915_private *i915,
- const struct i915_power_well *power_well)
-{
- enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well);
- struct intel_digital_port *dig_port = aux_ch_to_digital_port(i915, aux_ch);
-
- return intel_port_to_phy(i915, dig_port->base.port);
-}
-
-static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well,
- bool timeout_expected)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- int enable_delay = power_well->desc->hsw.fixed_enable_delay;
-
- /*
- * For some power wells we're not supposed to watch the status bit for
- * an ack, but rather just wait a fixed amount of time and then
- * proceed. This is only used on DG2.
- */
- if (IS_DG2(dev_priv) && enable_delay) {
- usleep_range(enable_delay, 2 * enable_delay);
- return;
- }
-
- /* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */
- if (intel_de_wait_for_set(dev_priv, regs->driver,
- HSW_PWR_WELL_CTL_STATE(pw_idx), 1)) {
- drm_dbg_kms(&dev_priv->drm, "%s power well enable timeout\n",
- intel_power_well_name(power_well));
-
- drm_WARN_ON(&dev_priv->drm, !timeout_expected);
-
- }
-}
-
-static u32 hsw_power_well_requesters(struct drm_i915_private *dev_priv,
- const struct i915_power_well_regs *regs,
- int pw_idx)
-{
- u32 req_mask = HSW_PWR_WELL_CTL_REQ(pw_idx);
- u32 ret;
-
- ret = intel_de_read(dev_priv, regs->bios) & req_mask ? 1 : 0;
- ret |= intel_de_read(dev_priv, regs->driver) & req_mask ? 2 : 0;
- if (regs->kvmr.reg)
- ret |= intel_de_read(dev_priv, regs->kvmr) & req_mask ? 4 : 0;
- ret |= intel_de_read(dev_priv, regs->debug) & req_mask ? 8 : 0;
-
- return ret;
-}
-
-static void hsw_wait_for_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- bool disabled;
- u32 reqs;
-
- /*
- * Bspec doesn't require waiting for PWs to get disabled, but still do
- * this for paranoia. The known cases where a PW will be forced on:
- * - a KVMR request on any power well via the KVMR request register
- * - a DMC request on PW1 and MISC_IO power wells via the BIOS and
- * DEBUG request registers
- * Skip the wait in case any of the request bits are set and print a
- * diagnostic message.
- */
- wait_for((disabled = !(intel_de_read(dev_priv, regs->driver) &
- HSW_PWR_WELL_CTL_STATE(pw_idx))) ||
- (reqs = hsw_power_well_requesters(dev_priv, regs, pw_idx)), 1);
- if (disabled)
- return;
-
- drm_dbg_kms(&dev_priv->drm,
- "%s forced on (bios:%d driver:%d kvmr:%d debug:%d)\n",
- intel_power_well_name(power_well),
- !!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8));
-}
-
-static void gen9_wait_for_power_well_fuses(struct drm_i915_private *dev_priv,
- enum skl_power_gate pg)
-{
- /* Timeout 5us for PG#0, for other PGs 1us */
- drm_WARN_ON(&dev_priv->drm,
- intel_de_wait_for_set(dev_priv, SKL_FUSE_STATUS,
- SKL_FUSE_PG_DIST_STATUS(pg), 1));
-}
-
-static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- u32 val;
-
- if (power_well->desc->hsw.has_fuses) {
- enum skl_power_gate pg;
-
- pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) :
- SKL_PW_CTL_IDX_TO_PG(pw_idx);
-
- /* Wa_16013190616:adlp */
- if (IS_ALDERLAKE_P(dev_priv) && pg == SKL_PG1)
- intel_de_rmw(dev_priv, GEN8_CHICKEN_DCPR_1, 0, DISABLE_FLR_SRC);
-
- /*
- * For PW1 we have to wait both for the PW0/PG0 fuse state
- * before enabling the power well and PW1/PG1's own fuse
- * state after the enabling. For all other power wells with
- * fuses we only have to wait for that PW/PG's fuse state
- * after the enabling.
- */
- if (pg == SKL_PG1)
- gen9_wait_for_power_well_fuses(dev_priv, SKL_PG0);
- }
-
- val = intel_de_read(dev_priv, regs->driver);
- intel_de_write(dev_priv, regs->driver,
- val | HSW_PWR_WELL_CTL_REQ(pw_idx));
-
- hsw_wait_for_power_well_enable(dev_priv, power_well, false);
-
- if (power_well->desc->hsw.has_fuses) {
- enum skl_power_gate pg;
-
- pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) :
- SKL_PW_CTL_IDX_TO_PG(pw_idx);
- gen9_wait_for_power_well_fuses(dev_priv, pg);
- }
-
- hsw_power_well_post_enable(dev_priv,
- power_well->desc->hsw.irq_pipe_mask,
- power_well->desc->hsw.has_vga);
-}
-
-static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- u32 val;
-
- hsw_power_well_pre_disable(dev_priv,
- power_well->desc->hsw.irq_pipe_mask);
-
- val = intel_de_read(dev_priv, regs->driver);
- intel_de_write(dev_priv, regs->driver,
- val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
- hsw_wait_for_power_well_disable(dev_priv, power_well);
-}
-
-static void
-icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
- u32 val;
-
- drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv));
-
- val = intel_de_read(dev_priv, regs->driver);
- intel_de_write(dev_priv, regs->driver,
- val | HSW_PWR_WELL_CTL_REQ(pw_idx));
-
- if (DISPLAY_VER(dev_priv) < 12) {
- val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy));
- intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy),
- val | ICL_LANE_ENABLE_AUX);
- }
-
- hsw_wait_for_power_well_enable(dev_priv, power_well, false);
-
- /* Display WA #1178: icl */
- if (pw_idx >= ICL_PW_CTL_IDX_AUX_A && pw_idx <= ICL_PW_CTL_IDX_AUX_B &&
- !intel_bios_is_port_edp(dev_priv, (enum port)phy)) {
- val = intel_de_read(dev_priv, ICL_AUX_ANAOVRD1(pw_idx));
- val |= ICL_AUX_ANAOVRD1_ENABLE | ICL_AUX_ANAOVRD1_LDO_BYPASS;
- intel_de_write(dev_priv, ICL_AUX_ANAOVRD1(pw_idx), val);
- }
-}
-
-static void
-icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
- u32 val;
-
- drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv));
-
- val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy));
- intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy),
- val & ~ICL_LANE_ENABLE_AUX);
-
- val = intel_de_read(dev_priv, regs->driver);
- intel_de_write(dev_priv, regs->driver,
- val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
-
- hsw_wait_for_power_well_disable(dev_priv, power_well);
-}
-
-#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM)
-
-static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well,
- struct intel_digital_port *dig_port)
-{
- if (drm_WARN_ON(&dev_priv->drm, !dig_port))
- return;
-
- if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port))
- return;
-
- drm_WARN_ON(&dev_priv->drm, !intel_tc_port_ref_held(dig_port));
-}
-
-#else
-
-static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well,
- struct intel_digital_port *dig_port)
-{
-}
-
-#endif
-
-#define TGL_AUX_PW_TO_TC_PORT(pw_idx) ((pw_idx) - TGL_PW_CTL_IDX_AUX_TC1)
-
-static void icl_tc_cold_exit(struct drm_i915_private *i915)
-{
- int ret, tries = 0;
-
- while (1) {
- ret = snb_pcode_write_timeout(i915, ICL_PCODE_EXIT_TCCOLD, 0,
- 250, 1);
- if (ret != -EAGAIN || ++tries == 3)
- break;
- msleep(1);
- }
-
- /* Spec states that TC cold exit can take up to 1ms to complete */
- if (!ret)
- msleep(1);
-
- /* TODO: turn failure into a error as soon i915 CI updates ICL IFWI */
- drm_dbg_kms(&i915->drm, "TC cold block %s\n", ret ? "failed" :
- "succeeded");
-}
-
-static void
-icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well);
- struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch);
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- bool is_tbt = power_well->desc->hsw.is_tc_tbt;
- bool timeout_expected;
- u32 val;
-
- icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port);
-
- val = intel_de_read(dev_priv, DP_AUX_CH_CTL(aux_ch));
- val &= ~DP_AUX_CH_CTL_TBT_IO;
- if (is_tbt)
- val |= DP_AUX_CH_CTL_TBT_IO;
- intel_de_write(dev_priv, DP_AUX_CH_CTL(aux_ch), val);
-
- val = intel_de_read(dev_priv, regs->driver);
- intel_de_write(dev_priv, regs->driver,
- val | HSW_PWR_WELL_CTL_REQ(power_well->desc->hsw.idx));
-
- /*
- * An AUX timeout is expected if the TBT DP tunnel is down,
- * or need to enable AUX on a legacy TypeC port as part of the TC-cold
- * exit sequence.
- */
- timeout_expected = is_tbt || intel_tc_cold_requires_aux_pw(dig_port);
- if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port))
- icl_tc_cold_exit(dev_priv);
-
- hsw_wait_for_power_well_enable(dev_priv, power_well, timeout_expected);
-
- if (DISPLAY_VER(dev_priv) >= 12 && !is_tbt) {
- enum tc_port tc_port;
-
- tc_port = TGL_AUX_PW_TO_TC_PORT(power_well->desc->hsw.idx);
- intel_de_write(dev_priv, HIP_INDEX_REG(tc_port),
- HIP_INDEX_VAL(tc_port, 0x2));
-
- if (intel_de_wait_for_set(dev_priv, DKL_CMN_UC_DW_27(tc_port),
- DKL_CMN_UC_DW27_UC_HEALTH, 1))
- drm_warn(&dev_priv->drm,
- "Timeout waiting TC uC health\n");
- }
-}
-
-static void
-icl_aux_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
-
- if (intel_phy_is_tc(dev_priv, phy))
- return icl_tc_phy_aux_power_well_enable(dev_priv, power_well);
- else if (IS_ICELAKE(dev_priv))
- return icl_combo_phy_aux_power_well_enable(dev_priv,
- power_well);
- else
- return hsw_power_well_enable(dev_priv, power_well);
-}
-
-static void
-icl_aux_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
-
- if (intel_phy_is_tc(dev_priv, phy))
- return hsw_power_well_disable(dev_priv, power_well);
- else if (IS_ICELAKE(dev_priv))
- return icl_combo_phy_aux_power_well_disable(dev_priv,
- power_well);
- else
- return hsw_power_well_disable(dev_priv, power_well);
-}
-
-/*
- * We should only use the power well if we explicitly asked the hardware to
- * enable it, so check if it's enabled and also check if we've requested it to
- * be enabled.
- */
-static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- enum i915_power_well_id id = power_well->desc->id;
- int pw_idx = power_well->desc->hsw.idx;
- u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx) |
- HSW_PWR_WELL_CTL_STATE(pw_idx);
- u32 val;
-
- val = intel_de_read(dev_priv, regs->driver);
-
- /*
- * On GEN9 big core due to a DMC bug the driver's request bits for PW1
- * and the MISC_IO PW will be not restored, so check instead for the
- * BIOS's own request bits, which are forced-on for these power wells
- * when exiting DC5/6.
- */
- if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv) &&
- (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO))
- val |= intel_de_read(dev_priv, regs->bios);
-
- return (val & mask) == mask;
-}
-
-static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
-{
- drm_WARN_ONCE(&dev_priv->drm,
- (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC9),
- "DC9 already programmed to be enabled.\n");
- drm_WARN_ONCE(&dev_priv->drm,
- intel_de_read(dev_priv, DC_STATE_EN) &
- DC_STATE_EN_UPTO_DC5,
- "DC5 still not disabled to enable DC9.\n");
- drm_WARN_ONCE(&dev_priv->drm,
- intel_de_read(dev_priv, HSW_PWR_WELL_CTL2) &
- HSW_PWR_WELL_CTL_REQ(SKL_PW_CTL_IDX_PW_2),
- "Power well 2 on.\n");
- drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv),
- "Interrupts not disabled yet.\n");
-
- /*
- * TODO: check for the following to verify the conditions to enter DC9
- * state are satisfied:
- * 1] Check relevant display engine registers to verify if mode set
- * disable sequence was followed.
- * 2] Check if display uninitialize sequence is initialized.
- */
-}
-
-static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
-{
- drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv),
- "Interrupts not disabled yet.\n");
- drm_WARN_ONCE(&dev_priv->drm,
- intel_de_read(dev_priv, DC_STATE_EN) &
- DC_STATE_EN_UPTO_DC5,
- "DC5 still not disabled.\n");
-
- /*
- * TODO: check for the following to verify DC9 state was indeed
- * entered before programming to disable it:
- * 1] Check relevant display engine registers to verify if mode
- * set disable sequence was followed.
- * 2] Check if display uninitialize sequence is initialized.
- */
-}
-
-static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
- u32 state)
-{
- int rewrites = 0;
- int rereads = 0;
- u32 v;
-
- intel_de_write(dev_priv, DC_STATE_EN, state);
-
- /* It has been observed that disabling the dc6 state sometimes
- * doesn't stick and dmc keeps returning old value. Make sure
- * the write really sticks enough times and also force rewrite until
- * we are confident that state is exactly what we want.
- */
- do {
- v = intel_de_read(dev_priv, DC_STATE_EN);
-
- if (v != state) {
- intel_de_write(dev_priv, DC_STATE_EN, state);
- rewrites++;
- rereads = 0;
- } else if (rereads++ > 5) {
- break;
- }
-
- } while (rewrites < 100);
-
- if (v != state)
- drm_err(&dev_priv->drm,
- "Writing dc state to 0x%x failed, now 0x%x\n",
- state, v);
-
- /* Most of the times we need one retry, avoid spam */
- if (rewrites > 1)
- drm_dbg_kms(&dev_priv->drm,
- "Rewrote dc state to 0x%x %d times\n",
- state, rewrites);
-}
-
-static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
-{
- u32 mask;
-
- mask = DC_STATE_EN_UPTO_DC5;
-
- if (DISPLAY_VER(dev_priv) >= 12)
- mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6
- | DC_STATE_EN_DC9;
- else if (DISPLAY_VER(dev_priv) == 11)
- mask |= DC_STATE_EN_UPTO_DC6 | DC_STATE_EN_DC9;
- else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
- mask |= DC_STATE_EN_DC9;
- else
- mask |= DC_STATE_EN_UPTO_DC6;
-
- return mask;
-}
-
-static void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- if (!HAS_DISPLAY(dev_priv))
- return;
-
- val = intel_de_read(dev_priv, DC_STATE_EN) & gen9_dc_mask(dev_priv);
-
- drm_dbg_kms(&dev_priv->drm,
- "Resetting DC state tracking from %02x to %02x\n",
- dev_priv->dmc.dc_state, val);
- dev_priv->dmc.dc_state = val;
-}
-
-/**
- * gen9_set_dc_state - set target display C power state
- * @dev_priv: i915 device instance
- * @state: target DC power state
- * - DC_STATE_DISABLE
- * - DC_STATE_EN_UPTO_DC5
- * - DC_STATE_EN_UPTO_DC6
- * - DC_STATE_EN_DC9
- *
- * Signal to DMC firmware/HW the target DC power state passed in @state.
- * DMC/HW can turn off individual display clocks and power rails when entering
- * a deeper DC power state (higher in number) and turns these back when exiting
- * that state to a shallower power state (lower in number). The HW will decide
- * when to actually enter a given state on an on-demand basis, for instance
- * depending on the active state of display pipes. The state of display
- * registers backed by affected power rails are saved/restored as needed.
- *
- * Based on the above enabling a deeper DC power state is asynchronous wrt.
- * enabling it. Disabling a deeper power state is synchronous: for instance
- * setting %DC_STATE_DISABLE won't complete until all HW resources are turned
- * back on and register state is restored. This is guaranteed by the MMIO write
- * to DC_STATE_EN blocking until the state is restored.
- */
-static void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state)
-{
- u32 val;
- u32 mask;
-
- if (!HAS_DISPLAY(dev_priv))
- return;
-
- if (drm_WARN_ON_ONCE(&dev_priv->drm,
- state & ~dev_priv->dmc.allowed_dc_mask))
- state &= dev_priv->dmc.allowed_dc_mask;
-
- val = intel_de_read(dev_priv, DC_STATE_EN);
- mask = gen9_dc_mask(dev_priv);
- drm_dbg_kms(&dev_priv->drm, "Setting DC state from %02x to %02x\n",
- val & mask, state);
-
- /* Check if DMC is ignoring our DC state requests */
- if ((val & mask) != dev_priv->dmc.dc_state)
- drm_err(&dev_priv->drm, "DC state mismatch (0x%x -> 0x%x)\n",
- dev_priv->dmc.dc_state, val & mask);
-
- val &= ~mask;
- val |= state;
-
- gen9_write_dc_state(dev_priv, val);
-
- dev_priv->dmc.dc_state = val & mask;
-}
-
static u32
sanitize_target_dc_state(struct drm_i915_private *dev_priv,
u32 target_dc_state)
@@ -855,65 +249,6 @@ sanitize_target_dc_state(struct drm_i915_private *dev_priv,
return target_dc_state;
}
-static void tgl_enable_dc3co(struct drm_i915_private *dev_priv)
-{
- drm_dbg_kms(&dev_priv->drm, "Enabling DC3CO\n");
- gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
-}
-
-static void tgl_disable_dc3co(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- drm_dbg_kms(&dev_priv->drm, "Disabling DC3CO\n");
- val = intel_de_read(dev_priv, DC_STATE_EN);
- val &= ~DC_STATE_DC3CO_STATUS;
- intel_de_write(dev_priv, DC_STATE_EN, val);
- gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
- /*
- * Delay of 200us DC3CO Exit time B.Spec 49196
- */
- usleep_range(200, 210);
-}
-
-static void bxt_enable_dc9(struct drm_i915_private *dev_priv)
-{
- assert_can_enable_dc9(dev_priv);
-
- drm_dbg_kms(&dev_priv->drm, "Enabling DC9\n");
- /*
- * Power sequencer reset is not needed on
- * platforms with South Display Engine on PCH,
- * because PPS registers are always on.
- */
- if (!HAS_PCH_SPLIT(dev_priv))
- intel_pps_reset_all(dev_priv);
- gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
-}
-
-static void bxt_disable_dc9(struct drm_i915_private *dev_priv)
-{
- assert_can_disable_dc9(dev_priv);
-
- drm_dbg_kms(&dev_priv->drm, "Disabling DC9\n");
-
- gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
-
- intel_pps_unlock_regs_wa(dev_priv);
-}
-
-static void assert_dmc_loaded(struct drm_i915_private *dev_priv)
-{
- drm_WARN_ONCE(&dev_priv->drm,
- !intel_de_read(dev_priv,
- DMC_PROGRAM(dev_priv->dmc.dmc_info[DMC_FW_MAIN].start_mmioaddr, 0)),
- "DMC program storage start is NULL\n");
- drm_WARN_ONCE(&dev_priv->drm, !intel_de_read(dev_priv, DMC_SSP_BASE),
- "DMC SSP Base Not fine\n");
- drm_WARN_ONCE(&dev_priv->drm, !intel_de_read(dev_priv, DMC_HTP_SKL),
- "DMC HTP Not fine\n");
-}
-
/**
* intel_display_power_set_target_dc_state - Set target dc state.
* @dev_priv: i915 device
@@ -958,912 +293,8 @@ void intel_display_power_set_target_dc_state(struct drm_i915_private *dev_priv,
mutex_unlock(&power_domains->lock);
}
-static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
-{
- enum i915_power_well_id high_pg;
-
- /* Power wells at this level and above must be disabled for DC5 entry */
- if (DISPLAY_VER(dev_priv) == 12)
- high_pg = ICL_DISP_PW_3;
- else
- high_pg = SKL_DISP_PW_2;
-
- drm_WARN_ONCE(&dev_priv->drm,
- intel_display_power_well_is_enabled(dev_priv, high_pg),
- "Power wells above platform's DC5 limit still enabled.\n");
-
- drm_WARN_ONCE(&dev_priv->drm,
- (intel_de_read(dev_priv, DC_STATE_EN) &
- DC_STATE_EN_UPTO_DC5),
- "DC5 already programmed to be enabled.\n");
- assert_rpm_wakelock_held(&dev_priv->runtime_pm);
-
- assert_dmc_loaded(dev_priv);
-}
-
-static void gen9_enable_dc5(struct drm_i915_private *dev_priv)
-{
- assert_can_enable_dc5(dev_priv);
-
- drm_dbg_kms(&dev_priv->drm, "Enabling DC5\n");
-
- /* Wa Display #1183: skl,kbl,cfl */
- if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv))
- intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1,
- intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT);
-
- gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
-}
-
-static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
-{
- drm_WARN_ONCE(&dev_priv->drm,
- intel_de_read(dev_priv, UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
- "Backlight is not disabled.\n");
- drm_WARN_ONCE(&dev_priv->drm,
- (intel_de_read(dev_priv, DC_STATE_EN) &
- DC_STATE_EN_UPTO_DC6),
- "DC6 already programmed to be enabled.\n");
-
- assert_dmc_loaded(dev_priv);
-}
-
-static void skl_enable_dc6(struct drm_i915_private *dev_priv)
-{
- assert_can_enable_dc6(dev_priv);
-
- drm_dbg_kms(&dev_priv->drm, "Enabling DC6\n");
-
- /* Wa Display #1183: skl,kbl,cfl */
- if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv))
- intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1,
- intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT);
-
- gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
-}
-
-static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
- int pw_idx = power_well->desc->hsw.idx;
- u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx);
- u32 bios_req = intel_de_read(dev_priv, regs->bios);
-
- /* Take over the request bit if set by BIOS. */
- if (bios_req & mask) {
- u32 drv_req = intel_de_read(dev_priv, regs->driver);
-
- if (!(drv_req & mask))
- intel_de_write(dev_priv, regs->driver, drv_req | mask);
- intel_de_write(dev_priv, regs->bios, bios_req & ~mask);
- }
-}
-
-static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- bxt_ddi_phy_init(dev_priv, power_well->desc->bxt.phy);
-}
-
-static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- bxt_ddi_phy_uninit(dev_priv, power_well->desc->bxt.phy);
-}
-
-static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- return bxt_ddi_phy_is_enabled(dev_priv, power_well->desc->bxt.phy);
-}
-
-static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
-{
- struct i915_power_well *power_well;
-
- power_well = lookup_power_well(dev_priv, BXT_DISP_PW_DPIO_CMN_A);
- if (intel_power_well_refcount(power_well) > 0)
- bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
-
- power_well = lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC);
- if (intel_power_well_refcount(power_well) > 0)
- bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
-
- if (IS_GEMINILAKE(dev_priv)) {
- power_well = lookup_power_well(dev_priv,
- GLK_DISP_PW_DPIO_CMN_C);
- if (intel_power_well_refcount(power_well) > 0)
- bxt_ddi_phy_verify_state(dev_priv,
- power_well->desc->bxt.phy);
- }
-}
-
-static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- return ((intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 &&
- (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0);
-}
-
-static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
-{
- u8 hw_enabled_dbuf_slices = intel_enabled_dbuf_slices_mask(dev_priv);
- u8 enabled_dbuf_slices = dev_priv->dbuf.enabled_slices;
-
- drm_WARN(&dev_priv->drm,
- hw_enabled_dbuf_slices != enabled_dbuf_slices,
- "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n",
- hw_enabled_dbuf_slices,
- enabled_dbuf_slices);
-}
-
-static void gen9_disable_dc_states(struct drm_i915_private *dev_priv)
-{
- struct intel_cdclk_config cdclk_config = {};
-
- if (dev_priv->dmc.target_dc_state == DC_STATE_EN_DC3CO) {
- tgl_disable_dc3co(dev_priv);
- return;
- }
-
- gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
-
- if (!HAS_DISPLAY(dev_priv))
- return;
-
- intel_cdclk_get_cdclk(dev_priv, &cdclk_config);
- /* Can't read out voltage_level so can't use intel_cdclk_changed() */
- drm_WARN_ON(&dev_priv->drm,
- intel_cdclk_needs_modeset(&dev_priv->cdclk.hw,
- &cdclk_config));
-
- gen9_assert_dbuf_enabled(dev_priv);
-
- if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
- bxt_verify_ddi_phy_power_wells(dev_priv);
-
- if (DISPLAY_VER(dev_priv) >= 11)
- /*
- * DMC retains HW context only for port A, the other combo
- * PHY's HW context for port B is lost after DC transitions,
- * so we need to restore it manually.
- */
- intel_combo_phy_init(dev_priv);
-}
-
-static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- gen9_disable_dc_states(dev_priv);
-}
-
-static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- if (!intel_dmc_has_payload(dev_priv))
- return;
-
- switch (dev_priv->dmc.target_dc_state) {
- case DC_STATE_EN_DC3CO:
- tgl_enable_dc3co(dev_priv);
- break;
- case DC_STATE_EN_UPTO_DC6:
- skl_enable_dc6(dev_priv);
- break;
- case DC_STATE_EN_UPTO_DC5:
- gen9_enable_dc5(dev_priv);
- break;
- }
-}
-
-static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
-}
-
-static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
-}
-
-static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- return true;
-}
-
-static void i830_pipes_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- if ((intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE) == 0)
- i830_enable_pipe(dev_priv, PIPE_A);
- if ((intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE) == 0)
- i830_enable_pipe(dev_priv, PIPE_B);
-}
-
-static void i830_pipes_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- i830_disable_pipe(dev_priv, PIPE_B);
- i830_disable_pipe(dev_priv, PIPE_A);
-}
-
-static bool i830_pipes_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- return intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE &&
- intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
-}
-
-static void i830_pipes_power_well_sync_hw(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- if (intel_power_well_refcount(power_well) > 0)
- i830_pipes_power_well_enable(dev_priv, power_well);
- else
- i830_pipes_power_well_disable(dev_priv, power_well);
-}
-
-static void vlv_set_power_well(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well, bool enable)
-{
- int pw_idx = power_well->desc->vlv.idx;
- u32 mask;
- u32 state;
- u32 ctrl;
-
- mask = PUNIT_PWRGT_MASK(pw_idx);
- state = enable ? PUNIT_PWRGT_PWR_ON(pw_idx) :
- PUNIT_PWRGT_PWR_GATE(pw_idx);
-
- vlv_punit_get(dev_priv);
-
-#define COND \
- ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
-
- if (COND)
- goto out;
-
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
- ctrl &= ~mask;
- ctrl |= state;
- vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
-
- if (wait_for(COND, 100))
- drm_err(&dev_priv->drm,
- "timeout setting power well state %08x (%08x)\n",
- state,
- vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
-
-#undef COND
-
-out:
- vlv_punit_put(dev_priv);
-}
-
-static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_set_power_well(dev_priv, power_well, true);
-}
-
-static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_set_power_well(dev_priv, power_well, false);
-}
-
-static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- int pw_idx = power_well->desc->vlv.idx;
- bool enabled = false;
- u32 mask;
- u32 state;
- u32 ctrl;
-
- mask = PUNIT_PWRGT_MASK(pw_idx);
- ctrl = PUNIT_PWRGT_PWR_ON(pw_idx);
-
- vlv_punit_get(dev_priv);
-
- state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
- /*
- * We only ever set the power-on and power-gate states, anything
- * else is unexpected.
- */
- drm_WARN_ON(&dev_priv->drm, state != PUNIT_PWRGT_PWR_ON(pw_idx) &&
- state != PUNIT_PWRGT_PWR_GATE(pw_idx));
- if (state == ctrl)
- enabled = true;
-
- /*
- * A transient state at this point would mean some unexpected party
- * is poking at the power controls too.
- */
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
- drm_WARN_ON(&dev_priv->drm, ctrl != state);
-
- vlv_punit_put(dev_priv);
-
- return enabled;
-}
-
-static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
-{
- u32 val;
-
- /*
- * On driver load, a pipe may be active and driving a DSI display.
- * Preserve DPOUNIT_CLOCK_GATE_DISABLE to avoid the pipe getting stuck
- * (and never recovering) in this case. intel_dsi_post_disable() will
- * clear it when we turn off the display.
- */
- val = intel_de_read(dev_priv, DSPCLK_GATE_D);
- val &= DPOUNIT_CLOCK_GATE_DISABLE;
- val |= VRHUNIT_CLOCK_GATE_DISABLE;
- intel_de_write(dev_priv, DSPCLK_GATE_D, val);
-
- /*
- * Disable trickle feed and enable pnd deadline calculation
- */
- intel_de_write(dev_priv, MI_ARB_VLV,
- MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
- intel_de_write(dev_priv, CBR1_VLV, 0);
-
- drm_WARN_ON(&dev_priv->drm, RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
- intel_de_write(dev_priv, RAWCLK_FREQ_VLV,
- DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq,
- 1000));
-}
-
-static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
-{
- struct intel_encoder *encoder;
- enum pipe pipe;
-
- /*
- * Enable the CRI clock source so we can get at the
- * display and the reference clock for VGA
- * hotplug / manual detection. Supposedly DSI also
- * needs the ref clock up and running.
- *
- * CHV DPLL B/C have some issues if VGA mode is enabled.
- */
- for_each_pipe(dev_priv, pipe) {
- u32 val = intel_de_read(dev_priv, DPLL(pipe));
-
- val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
- if (pipe != PIPE_A)
- val |= DPLL_INTEGRATED_CRI_CLK_VLV;
-
- intel_de_write(dev_priv, DPLL(pipe), val);
- }
-
- vlv_init_display_clock_gating(dev_priv);
-
- spin_lock_irq(&dev_priv->irq_lock);
- valleyview_enable_display_irqs(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
-
- /*
- * During driver initialization/resume we can avoid restoring the
- * part of the HW/SW state that will be inited anyway explicitly.
- */
- if (dev_priv->power_domains.initializing)
- return;
-
- intel_hpd_init(dev_priv);
- intel_hpd_poll_disable(dev_priv);
-
- /* Re-enable the ADPA, if we have one */
- for_each_intel_encoder(&dev_priv->drm, encoder) {
- if (encoder->type == INTEL_OUTPUT_ANALOG)
- intel_crt_reset(&encoder->base);
- }
-
- intel_vga_redisable_power_on(dev_priv);
-
- intel_pps_unlock_regs_wa(dev_priv);
-}
-
-static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
-{
- spin_lock_irq(&dev_priv->irq_lock);
- valleyview_disable_display_irqs(dev_priv);
- spin_unlock_irq(&dev_priv->irq_lock);
-
- /* make sure we're done processing display irqs */
- intel_synchronize_irq(dev_priv);
-
- intel_pps_reset_all(dev_priv);
-
- /* Prevent us from re-enabling polling on accident in late suspend */
- if (!dev_priv->drm.dev->power.is_suspended)
- intel_hpd_poll_enable(dev_priv);
-}
-
-static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_set_power_well(dev_priv, power_well, true);
-
- vlv_display_power_well_init(dev_priv);
-}
-
-static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_display_power_well_deinit(dev_priv);
-
- vlv_set_power_well(dev_priv, power_well, false);
-}
-
-static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- /* since ref/cri clock was enabled */
- udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
-
- vlv_set_power_well(dev_priv, power_well, true);
-
- /*
- * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
- * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
- * a. GUnit 0x2110 bit[0] set to 1 (def 0)
- * b. The other bits such as sfr settings / modesel may all
- * be set to 0.
- *
- * This should only be done on init and resume from S3 with
- * both PLLs disabled, or we risk losing DPIO and PLL
- * synchronization.
- */
- intel_de_write(dev_priv, DPIO_CTL,
- intel_de_read(dev_priv, DPIO_CTL) | DPIO_CMNRST);
-}
-
-static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum pipe pipe;
-
- for_each_pipe(dev_priv, pipe)
- assert_pll_disabled(dev_priv, pipe);
-
- /* Assert common reset */
- intel_de_write(dev_priv, DPIO_CTL,
- intel_de_read(dev_priv, DPIO_CTL) & ~DPIO_CMNRST);
-
- vlv_set_power_well(dev_priv, power_well, false);
-}
-
#define POWER_DOMAIN_MASK (GENMASK_ULL(POWER_DOMAIN_NUM - 1, 0))
-#define BITS_SET(val, bits) (((val) & (bits)) == (bits))
-
-static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
-{
- struct i915_power_well *cmn_bc =
- lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC);
- struct i915_power_well *cmn_d =
- lookup_power_well(dev_priv, CHV_DISP_PW_DPIO_CMN_D);
- u32 phy_control = dev_priv->chv_phy_control;
- u32 phy_status = 0;
- u32 phy_status_mask = 0xffffffff;
-
- /*
- * The BIOS can leave the PHY is some weird state
- * where it doesn't fully power down some parts.
- * Disable the asserts until the PHY has been fully
- * reset (ie. the power well has been disabled at
- * least once).
- */
- if (!dev_priv->chv_phy_assert[DPIO_PHY0])
- phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) |
- PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) |
- PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) |
- PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) |
- PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) |
- PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1));
-
- if (!dev_priv->chv_phy_assert[DPIO_PHY1])
- phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) |
- PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) |
- PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1));
-
- if (intel_power_well_is_enabled(dev_priv, cmn_bc)) {
- phy_status |= PHY_POWERGOOD(DPIO_PHY0);
-
- /* this assumes override is only used to enable lanes */
- if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0)
- phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0);
-
- if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0)
- phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1);
-
- /* CL1 is on whenever anything is on in either channel */
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) |
- PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)))
- phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0);
-
- /*
- * The DPLLB check accounts for the pipe B + port A usage
- * with CL2 powered up but all the lanes in the second channel
- * powered down.
- */
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
- (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
- phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
-
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0)))
- phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0);
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0)))
- phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1);
-
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1)))
- phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0);
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1)))
- phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1);
- }
-
- if (intel_power_well_is_enabled(dev_priv, cmn_d)) {
- phy_status |= PHY_POWERGOOD(DPIO_PHY1);
-
- /* this assumes override is only used to enable lanes */
- if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0)
- phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0);
-
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0)))
- phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0);
-
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0)))
- phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0);
- if (BITS_SET(phy_control,
- PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0)))
- phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1);
- }
-
- phy_status &= phy_status_mask;
-
- /*
- * The PHY may be busy with some initial calibration and whatnot,
- * so the power state can take a while to actually change.
- */
- if (intel_de_wait_for_register(dev_priv, DISPLAY_PHY_STATUS,
- phy_status_mask, phy_status, 10))
- drm_err(&dev_priv->drm,
- "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
- intel_de_read(dev_priv, DISPLAY_PHY_STATUS) & phy_status_mask,
- phy_status, dev_priv->chv_phy_control);
-}
-
-#undef BITS_SET
-
-static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum dpio_phy phy;
- enum pipe pipe;
- u32 tmp;
-
- drm_WARN_ON_ONCE(&dev_priv->drm,
- power_well->desc->id != VLV_DISP_PW_DPIO_CMN_BC &&
- power_well->desc->id != CHV_DISP_PW_DPIO_CMN_D);
-
- if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) {
- pipe = PIPE_A;
- phy = DPIO_PHY0;
- } else {
- pipe = PIPE_C;
- phy = DPIO_PHY1;
- }
-
- /* since ref/cri clock was enabled */
- udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
- vlv_set_power_well(dev_priv, power_well, true);
-
- /* Poll for phypwrgood signal */
- if (intel_de_wait_for_set(dev_priv, DISPLAY_PHY_STATUS,
- PHY_POWERGOOD(phy), 1))
- drm_err(&dev_priv->drm, "Display PHY %d is not power up\n",
- phy);
-
- vlv_dpio_get(dev_priv);
-
- /* Enable dynamic power down */
- tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28);
- tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN |
- DPIO_SUS_CLK_CONFIG_GATE_CLKREQ;
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp);
-
- if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) {
- tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1);
- tmp |= DPIO_DYNPWRDOWNEN_CH1;
- vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp);
- } else {
- /*
- * Force the non-existing CL2 off. BXT does this
- * too, so maybe it saves some power even though
- * CL2 doesn't exist?
- */
- tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
- tmp |= DPIO_CL2_LDOFUSE_PWRENB;
- vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp);
- }
-
- vlv_dpio_put(dev_priv);
-
- dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy);
- intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
- dev_priv->chv_phy_control);
-
- drm_dbg_kms(&dev_priv->drm,
- "Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
- phy, dev_priv->chv_phy_control);
-
- assert_chv_phy_status(dev_priv);
-}
-
-static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum dpio_phy phy;
-
- drm_WARN_ON_ONCE(&dev_priv->drm,
- power_well->desc->id != VLV_DISP_PW_DPIO_CMN_BC &&
- power_well->desc->id != CHV_DISP_PW_DPIO_CMN_D);
-
- if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) {
- phy = DPIO_PHY0;
- assert_pll_disabled(dev_priv, PIPE_A);
- assert_pll_disabled(dev_priv, PIPE_B);
- } else {
- phy = DPIO_PHY1;
- assert_pll_disabled(dev_priv, PIPE_C);
- }
-
- dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy);
- intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
- dev_priv->chv_phy_control);
-
- vlv_set_power_well(dev_priv, power_well, false);
-
- drm_dbg_kms(&dev_priv->drm,
- "Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
- phy, dev_priv->chv_phy_control);
-
- /* PHY is fully reset now, so we can enable the PHY state asserts */
- dev_priv->chv_phy_assert[phy] = true;
-
- assert_chv_phy_status(dev_priv);
-}
-
-static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy,
- enum dpio_channel ch, bool override, unsigned int mask)
-{
- enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C;
- u32 reg, val, expected, actual;
-
- /*
- * The BIOS can leave the PHY is some weird state
- * where it doesn't fully power down some parts.
- * Disable the asserts until the PHY has been fully
- * reset (ie. the power well has been disabled at
- * least once).
- */
- if (!dev_priv->chv_phy_assert[phy])
- return;
-
- if (ch == DPIO_CH0)
- reg = _CHV_CMN_DW0_CH0;
- else
- reg = _CHV_CMN_DW6_CH1;
-
- vlv_dpio_get(dev_priv);
- val = vlv_dpio_read(dev_priv, pipe, reg);
- vlv_dpio_put(dev_priv);
-
- /*
- * This assumes !override is only used when the port is disabled.
- * All lanes should power down even without the override when
- * the port is disabled.
- */
- if (!override || mask == 0xf) {
- expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
- /*
- * If CH1 common lane is not active anymore
- * (eg. for pipe B DPLL) the entire channel will
- * shut down, which causes the common lane registers
- * to read as 0. That means we can't actually check
- * the lane power down status bits, but as the entire
- * register reads as 0 it's a good indication that the
- * channel is indeed entirely powered down.
- */
- if (ch == DPIO_CH1 && val == 0)
- expected = 0;
- } else if (mask != 0x0) {
- expected = DPIO_ANYDL_POWERDOWN;
- } else {
- expected = 0;
- }
-
- if (ch == DPIO_CH0)
- actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0;
- else
- actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1;
- actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
-
- drm_WARN(&dev_priv->drm, actual != expected,
- "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n",
- !!(actual & DPIO_ALLDL_POWERDOWN),
- !!(actual & DPIO_ANYDL_POWERDOWN),
- !!(expected & DPIO_ALLDL_POWERDOWN),
- !!(expected & DPIO_ANYDL_POWERDOWN),
- reg, val);
-}
-
-bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
- enum dpio_channel ch, bool override)
-{
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
- bool was_override;
-
- mutex_lock(&power_domains->lock);
-
- was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
-
- if (override == was_override)
- goto out;
-
- if (override)
- dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
- else
- dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
-
- intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
- dev_priv->chv_phy_control);
-
- drm_dbg_kms(&dev_priv->drm,
- "Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
- phy, ch, dev_priv->chv_phy_control);
-
- assert_chv_phy_status(dev_priv);
-
-out:
- mutex_unlock(&power_domains->lock);
-
- return was_override;
-}
-
-void chv_phy_powergate_lanes(struct intel_encoder *encoder,
- bool override, unsigned int mask)
-{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- struct i915_power_domains *power_domains = &dev_priv->power_domains;
- enum dpio_phy phy = vlv_dig_port_to_phy(enc_to_dig_port(encoder));
- enum dpio_channel ch = vlv_dig_port_to_channel(enc_to_dig_port(encoder));
-
- mutex_lock(&power_domains->lock);
-
- dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch);
- dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch);
-
- if (override)
- dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
- else
- dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
-
- intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
- dev_priv->chv_phy_control);
-
- drm_dbg_kms(&dev_priv->drm,
- "Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n",
- phy, ch, mask, dev_priv->chv_phy_control);
-
- assert_chv_phy_status(dev_priv);
-
- assert_chv_phy_powergate(dev_priv, phy, ch, override, mask);
-
- mutex_unlock(&power_domains->lock);
-}
-
-static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- enum pipe pipe = PIPE_A;
- bool enabled;
- u32 state, ctrl;
-
- vlv_punit_get(dev_priv);
-
- state = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe);
- /*
- * We only ever set the power-on and power-gate states, anything
- * else is unexpected.
- */
- drm_WARN_ON(&dev_priv->drm, state != DP_SSS_PWR_ON(pipe) &&
- state != DP_SSS_PWR_GATE(pipe));
- enabled = state == DP_SSS_PWR_ON(pipe);
-
- /*
- * A transient state at this point would mean some unexpected party
- * is poking at the power controls too.
- */
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSC_MASK(pipe);
- drm_WARN_ON(&dev_priv->drm, ctrl << 16 != state);
-
- vlv_punit_put(dev_priv);
-
- return enabled;
-}
-
-static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well,
- bool enable)
-{
- enum pipe pipe = PIPE_A;
- u32 state;
- u32 ctrl;
-
- state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
-
- vlv_punit_get(dev_priv);
-
-#define COND \
- ((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe)) == state)
-
- if (COND)
- goto out;
-
- ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
- ctrl &= ~DP_SSC_MASK(pipe);
- ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
- vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, ctrl);
-
- if (wait_for(COND, 100))
- drm_err(&dev_priv->drm,
- "timeout setting power well state %08x (%08x)\n",
- state,
- vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM));
-
-#undef COND
-
-out:
- vlv_punit_put(dev_priv);
-}
-
-static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
- dev_priv->chv_phy_control);
-}
-
-static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- chv_set_pipe_power_well(dev_priv, power_well, true);
-
- vlv_display_power_well_init(dev_priv);
-}
-
-static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- vlv_display_power_well_deinit(dev_priv);
-
- chv_set_pipe_power_well(dev_priv, power_well, false);
-}
-
static u64 __async_put_domains_mask(struct i915_power_domains *power_domains)
{
return power_domains->async_put_domains[0] |
@@ -3043,27 +1474,6 @@ intel_display_power_put_mask_in_set(struct drm_i915_private *i915,
#define XELPD_DDI_IO_TC3_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC3)
#define XELPD_DDI_IO_TC4_POWER_DOMAINS BIT_ULL(POWER_DOMAIN_PORT_DDI_IO_TC4)
-static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = i9xx_always_on_power_well_noop,
- .disable = i9xx_always_on_power_well_noop,
- .is_enabled = i9xx_always_on_power_well_enabled,
-};
-
-static const struct i915_power_well_ops chv_pipe_power_well_ops = {
- .sync_hw = chv_pipe_power_well_sync_hw,
- .enable = chv_pipe_power_well_enable,
- .disable = chv_pipe_power_well_disable,
- .is_enabled = chv_pipe_power_well_enabled,
-};
-
-static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = chv_dpio_cmn_power_well_enable,
- .disable = chv_dpio_cmn_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
-
static const struct i915_power_well_desc i9xx_always_on_power_well[] = {
{
.name = "always-on",
@@ -3074,13 +1484,6 @@ static const struct i915_power_well_desc i9xx_always_on_power_well[] = {
},
};
-static const struct i915_power_well_ops i830_pipes_power_well_ops = {
- .sync_hw = i830_pipes_power_well_sync_hw,
- .enable = i830_pipes_power_well_enable,
- .disable = i830_pipes_power_well_disable,
- .is_enabled = i830_pipes_power_well_enabled,
-};
-
static const struct i915_power_well_desc i830_power_wells[] = {
{
.name = "always-on",
@@ -3097,35 +1500,6 @@ static const struct i915_power_well_desc i830_power_wells[] = {
},
};
-static const struct i915_power_well_regs hsw_power_well_regs = {
- .bios = HSW_PWR_WELL_CTL1,
- .driver = HSW_PWR_WELL_CTL2,
- .kvmr = HSW_PWR_WELL_CTL3,
- .debug = HSW_PWR_WELL_CTL4,
-};
-
-static const struct i915_power_well_ops hsw_power_well_ops = {
- .regs = &hsw_power_well_regs,
- .sync_hw = hsw_power_well_sync_hw,
- .enable = hsw_power_well_enable,
- .disable = hsw_power_well_disable,
- .is_enabled = hsw_power_well_enabled,
-};
-
-static const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = gen9_dc_off_power_well_enable,
- .disable = gen9_dc_off_power_well_disable,
- .is_enabled = gen9_dc_off_power_well_enabled,
-};
-
-static const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = bxt_dpio_cmn_power_well_enable,
- .disable = bxt_dpio_cmn_power_well_disable,
- .is_enabled = bxt_dpio_cmn_power_well_enabled,
-};
-
static const struct i915_power_well_desc hsw_power_wells[] = {
{
.name = "always-on",
@@ -3167,27 +1541,6 @@ static const struct i915_power_well_desc bdw_power_wells[] = {
},
};
-static const struct i915_power_well_ops vlv_display_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = vlv_display_power_well_enable,
- .disable = vlv_display_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
-
-static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = vlv_dpio_cmn_power_well_enable,
- .disable = vlv_dpio_cmn_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
-
-static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
- .sync_hw = i9xx_power_well_sync_hw_noop,
- .enable = vlv_power_well_enable,
- .disable = vlv_power_well_disable,
- .is_enabled = vlv_power_well_enabled,
-};
-
static const struct i915_power_well_desc vlv_power_wells[] = {
{
.name = "always-on",
@@ -3569,34 +1922,6 @@ static const struct i915_power_well_desc glk_power_wells[] = {
},
};
-static const struct i915_power_well_regs icl_aux_power_well_regs = {
- .bios = ICL_PWR_WELL_CTL_AUX1,
- .driver = ICL_PWR_WELL_CTL_AUX2,
- .debug = ICL_PWR_WELL_CTL_AUX4,
-};
-
-static const struct i915_power_well_ops icl_aux_power_well_ops = {
- .regs = &icl_aux_power_well_regs,
- .sync_hw = hsw_power_well_sync_hw,
- .enable = icl_aux_power_well_enable,
- .disable = icl_aux_power_well_disable,
- .is_enabled = hsw_power_well_enabled,
-};
-
-static const struct i915_power_well_regs icl_ddi_power_well_regs = {
- .bios = ICL_PWR_WELL_CTL_DDI1,
- .driver = ICL_PWR_WELL_CTL_DDI2,
- .debug = ICL_PWR_WELL_CTL_DDI4,
-};
-
-static const struct i915_power_well_ops icl_ddi_power_well_ops = {
- .regs = &icl_ddi_power_well_regs,
- .sync_hw = hsw_power_well_sync_hw,
- .enable = hsw_power_well_enable,
- .disable = hsw_power_well_disable,
- .is_enabled = hsw_power_well_enabled,
-};
-
static const struct i915_power_well_desc icl_power_wells[] = {
{
.name = "always-on",
@@ -3810,90 +2135,6 @@ static const struct i915_power_well_desc icl_power_wells[] = {
},
};
-static void
-tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
-{
- u8 tries = 0;
- int ret;
-
- while (1) {
- u32 low_val;
- u32 high_val = 0;
-
- if (block)
- low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ;
- else
- low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ;
-
- /*
- * Spec states that we should timeout the request after 200us
- * but the function below will timeout after 500us
- */
- ret = snb_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val, &high_val);
- if (ret == 0) {
- if (block &&
- (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED))
- ret = -EIO;
- else
- break;
- }
-
- if (++tries == 3)
- break;
-
- msleep(1);
- }
-
- if (ret)
- drm_err(&i915->drm, "TC cold %sblock failed\n",
- block ? "" : "un");
- else
- drm_dbg_kms(&i915->drm, "TC cold %sblock succeeded\n",
- block ? "" : "un");
-}
-
-static void
-tgl_tc_cold_off_power_well_enable(struct drm_i915_private *i915,
- struct i915_power_well *power_well)
-{
- tgl_tc_cold_request(i915, true);
-}
-
-static void
-tgl_tc_cold_off_power_well_disable(struct drm_i915_private *i915,
- struct i915_power_well *power_well)
-{
- tgl_tc_cold_request(i915, false);
-}
-
-static void
-tgl_tc_cold_off_power_well_sync_hw(struct drm_i915_private *i915,
- struct i915_power_well *power_well)
-{
- if (intel_power_well_refcount(power_well) > 0)
- tgl_tc_cold_off_power_well_enable(i915, power_well);
- else
- tgl_tc_cold_off_power_well_disable(i915, power_well);
-}
-
-static bool
-tgl_tc_cold_off_power_well_is_enabled(struct drm_i915_private *dev_priv,
- struct i915_power_well *power_well)
-{
- /*
- * Not the correctly implementation but there is no way to just read it
- * from PCODE, so returning count to avoid state mismatch errors
- */
- return intel_power_well_refcount(power_well);
-}
-
-static const struct i915_power_well_ops tgl_tc_cold_off_ops = {
- .sync_hw = tgl_tc_cold_off_power_well_sync_hw,
- .enable = tgl_tc_cold_off_power_well_enable,
- .disable = tgl_tc_cold_off_power_well_disable,
- .is_enabled = tgl_tc_cold_off_power_well_is_enabled,
-};
-
static const struct i915_power_well_desc tgl_power_wells[] = {
{
.name = "always-on",
diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.c b/drivers/gpu/drm/i915/display/intel_display_power_well.c
index 2a0fb9d9c60f2..a92bb807f1972 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power_well.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power_well.c
@@ -4,7 +4,58 @@
*/
#include "i915_drv.h"
+#include "i915_irq.h"
+#include "intel_combo_phy.h"
+#include "intel_combo_phy_regs.h"
+#include "intel_crt.h"
+#include "intel_de.h"
#include "intel_display_power_well.h"
+#include "intel_display_types.h"
+#include "intel_dpio_phy.h"
+#include "intel_dpll.h"
+#include "intel_hotplug.h"
+#include "intel_pcode.h"
+#include "intel_pm.h"
+#include "intel_pps.h"
+#include "intel_vga.h"
+#include "intel_tc.h"
+#include "vlv_sideband.h"
+#include "vlv_sideband_reg.h"
+
+struct i915_power_well_regs {
+ i915_reg_t bios;
+ i915_reg_t driver;
+ i915_reg_t kvmr;
+ i915_reg_t debug;
+};
+
+struct i915_power_well_ops {
+ const struct i915_power_well_regs *regs;
+ /*
+ * Synchronize the well's hw state to match the current sw state, for
+ * example enable/disable it based on the current refcount. Called
+ * during driver init and resume time, possibly after first calling
+ * the enable/disable handlers.
+ */
+ void (*sync_hw)(struct drm_i915_private *i915,
+ struct i915_power_well *power_well);
+ /*
+ * Enable the well and resources that depend on it (for example
+ * interrupts located on the well). Called after the 0->1 refcount
+ * transition.
+ */
+ void (*enable)(struct drm_i915_private *i915,
+ struct i915_power_well *power_well);
+ /*
+ * Disable the well and resources that depend on it. Called after
+ * the 1->0 refcount transition.
+ */
+ void (*disable)(struct drm_i915_private *i915,
+ struct i915_power_well *power_well);
+ /* Returns the hw enabled state. */
+ bool (*is_enabled)(struct drm_i915_private *i915,
+ struct i915_power_well *power_well);
+};
struct i915_power_well *
lookup_power_well(struct drm_i915_private *i915,
@@ -111,3 +162,1769 @@ int intel_power_well_refcount(struct i915_power_well *power_well)
{
return power_well->count;
}
+
+/*
+ * Starting with Haswell, we have a "Power Down Well" that can be turned off
+ * when not needed anymore. We have 4 registers that can request the power well
+ * to be enabled, and it will only be disabled if none of the registers is
+ * requesting it to be enabled.
+ */
+static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv,
+ u8 irq_pipe_mask, bool has_vga)
+{
+ if (has_vga)
+ intel_vga_reset_io_mem(dev_priv);
+
+ if (irq_pipe_mask)
+ gen8_irq_power_well_post_enable(dev_priv, irq_pipe_mask);
+}
+
+static void hsw_power_well_pre_disable(struct drm_i915_private *dev_priv,
+ u8 irq_pipe_mask)
+{
+ if (irq_pipe_mask)
+ gen8_irq_power_well_pre_disable(dev_priv, irq_pipe_mask);
+}
+
+#define ICL_AUX_PW_TO_CH(pw_idx) \
+ ((pw_idx) - ICL_PW_CTL_IDX_AUX_A + AUX_CH_A)
+
+#define ICL_TBT_AUX_PW_TO_CH(pw_idx) \
+ ((pw_idx) - ICL_PW_CTL_IDX_AUX_TBT1 + AUX_CH_C)
+
+static enum aux_ch icl_aux_pw_to_ch(const struct i915_power_well *power_well)
+{
+ int pw_idx = power_well->desc->hsw.idx;
+
+ return power_well->desc->hsw.is_tc_tbt ? ICL_TBT_AUX_PW_TO_CH(pw_idx) :
+ ICL_AUX_PW_TO_CH(pw_idx);
+}
+
+static struct intel_digital_port *
+aux_ch_to_digital_port(struct drm_i915_private *dev_priv,
+ enum aux_ch aux_ch)
+{
+ struct intel_digital_port *dig_port = NULL;
+ struct intel_encoder *encoder;
+
+ for_each_intel_encoder(&dev_priv->drm, encoder) {
+ /* We'll check the MST primary port */
+ if (encoder->type == INTEL_OUTPUT_DP_MST)
+ continue;
+
+ dig_port = enc_to_dig_port(encoder);
+ if (!dig_port)
+ continue;
+
+ if (dig_port->aux_ch != aux_ch) {
+ dig_port = NULL;
+ continue;
+ }
+
+ break;
+ }
+
+ return dig_port;
+}
+
+static enum phy icl_aux_pw_to_phy(struct drm_i915_private *i915,
+ const struct i915_power_well *power_well)
+{
+ enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well);
+ struct intel_digital_port *dig_port = aux_ch_to_digital_port(i915, aux_ch);
+
+ return intel_port_to_phy(i915, dig_port->base.port);
+}
+
+static void hsw_wait_for_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well,
+ bool timeout_expected)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ int enable_delay = power_well->desc->hsw.fixed_enable_delay;
+
+ /*
+ * For some power wells we're not supposed to watch the status bit for
+ * an ack, but rather just wait a fixed amount of time and then
+ * proceed. This is only used on DG2.
+ */
+ if (IS_DG2(dev_priv) && enable_delay) {
+ usleep_range(enable_delay, 2 * enable_delay);
+ return;
+ }
+
+ /* Timeout for PW1:10 us, AUX:not specified, other PWs:20 us. */
+ if (intel_de_wait_for_set(dev_priv, regs->driver,
+ HSW_PWR_WELL_CTL_STATE(pw_idx), 1)) {
+ drm_dbg_kms(&dev_priv->drm, "%s power well enable timeout\n",
+ intel_power_well_name(power_well));
+
+ drm_WARN_ON(&dev_priv->drm, !timeout_expected);
+
+ }
+}
+
+static u32 hsw_power_well_requesters(struct drm_i915_private *dev_priv,
+ const struct i915_power_well_regs *regs,
+ int pw_idx)
+{
+ u32 req_mask = HSW_PWR_WELL_CTL_REQ(pw_idx);
+ u32 ret;
+
+ ret = intel_de_read(dev_priv, regs->bios) & req_mask ? 1 : 0;
+ ret |= intel_de_read(dev_priv, regs->driver) & req_mask ? 2 : 0;
+ if (regs->kvmr.reg)
+ ret |= intel_de_read(dev_priv, regs->kvmr) & req_mask ? 4 : 0;
+ ret |= intel_de_read(dev_priv, regs->debug) & req_mask ? 8 : 0;
+
+ return ret;
+}
+
+static void hsw_wait_for_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ bool disabled;
+ u32 reqs;
+
+ /*
+ * Bspec doesn't require waiting for PWs to get disabled, but still do
+ * this for paranoia. The known cases where a PW will be forced on:
+ * - a KVMR request on any power well via the KVMR request register
+ * - a DMC request on PW1 and MISC_IO power wells via the BIOS and
+ * DEBUG request registers
+ * Skip the wait in case any of the request bits are set and print a
+ * diagnostic message.
+ */
+ wait_for((disabled = !(intel_de_read(dev_priv, regs->driver) &
+ HSW_PWR_WELL_CTL_STATE(pw_idx))) ||
+ (reqs = hsw_power_well_requesters(dev_priv, regs, pw_idx)), 1);
+ if (disabled)
+ return;
+
+ drm_dbg_kms(&dev_priv->drm,
+ "%s forced on (bios:%d driver:%d kvmr:%d debug:%d)\n",
+ intel_power_well_name(power_well),
+ !!(reqs & 1), !!(reqs & 2), !!(reqs & 4), !!(reqs & 8));
+}
+
+static void gen9_wait_for_power_well_fuses(struct drm_i915_private *dev_priv,
+ enum skl_power_gate pg)
+{
+ /* Timeout 5us for PG#0, for other PGs 1us */
+ drm_WARN_ON(&dev_priv->drm,
+ intel_de_wait_for_set(dev_priv, SKL_FUSE_STATUS,
+ SKL_FUSE_PG_DIST_STATUS(pg), 1));
+}
+
+static void hsw_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ u32 val;
+
+ if (power_well->desc->hsw.has_fuses) {
+ enum skl_power_gate pg;
+
+ pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) :
+ SKL_PW_CTL_IDX_TO_PG(pw_idx);
+
+ /* Wa_16013190616:adlp */
+ if (IS_ALDERLAKE_P(dev_priv) && pg == SKL_PG1)
+ intel_de_rmw(dev_priv, GEN8_CHICKEN_DCPR_1, 0, DISABLE_FLR_SRC);
+
+ /*
+ * For PW1 we have to wait both for the PW0/PG0 fuse state
+ * before enabling the power well and PW1/PG1's own fuse
+ * state after the enabling. For all other power wells with
+ * fuses we only have to wait for that PW/PG's fuse state
+ * after the enabling.
+ */
+ if (pg == SKL_PG1)
+ gen9_wait_for_power_well_fuses(dev_priv, SKL_PG0);
+ }
+
+ val = intel_de_read(dev_priv, regs->driver);
+ intel_de_write(dev_priv, regs->driver,
+ val | HSW_PWR_WELL_CTL_REQ(pw_idx));
+
+ hsw_wait_for_power_well_enable(dev_priv, power_well, false);
+
+ if (power_well->desc->hsw.has_fuses) {
+ enum skl_power_gate pg;
+
+ pg = DISPLAY_VER(dev_priv) >= 11 ? ICL_PW_CTL_IDX_TO_PG(pw_idx) :
+ SKL_PW_CTL_IDX_TO_PG(pw_idx);
+ gen9_wait_for_power_well_fuses(dev_priv, pg);
+ }
+
+ hsw_power_well_post_enable(dev_priv,
+ power_well->desc->hsw.irq_pipe_mask,
+ power_well->desc->hsw.has_vga);
+}
+
+static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ u32 val;
+
+ hsw_power_well_pre_disable(dev_priv,
+ power_well->desc->hsw.irq_pipe_mask);
+
+ val = intel_de_read(dev_priv, regs->driver);
+ intel_de_write(dev_priv, regs->driver,
+ val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
+ hsw_wait_for_power_well_disable(dev_priv, power_well);
+}
+
+static void
+icl_combo_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
+ u32 val;
+
+ drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv));
+
+ val = intel_de_read(dev_priv, regs->driver);
+ intel_de_write(dev_priv, regs->driver,
+ val | HSW_PWR_WELL_CTL_REQ(pw_idx));
+
+ if (DISPLAY_VER(dev_priv) < 12) {
+ val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy));
+ intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy),
+ val | ICL_LANE_ENABLE_AUX);
+ }
+
+ hsw_wait_for_power_well_enable(dev_priv, power_well, false);
+
+ /* Display WA #1178: icl */
+ if (pw_idx >= ICL_PW_CTL_IDX_AUX_A && pw_idx <= ICL_PW_CTL_IDX_AUX_B &&
+ !intel_bios_is_port_edp(dev_priv, (enum port)phy)) {
+ val = intel_de_read(dev_priv, ICL_AUX_ANAOVRD1(pw_idx));
+ val |= ICL_AUX_ANAOVRD1_ENABLE | ICL_AUX_ANAOVRD1_LDO_BYPASS;
+ intel_de_write(dev_priv, ICL_AUX_ANAOVRD1(pw_idx), val);
+ }
+}
+
+static void
+icl_combo_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
+ u32 val;
+
+ drm_WARN_ON(&dev_priv->drm, !IS_ICELAKE(dev_priv));
+
+ val = intel_de_read(dev_priv, ICL_PORT_CL_DW12(phy));
+ intel_de_write(dev_priv, ICL_PORT_CL_DW12(phy),
+ val & ~ICL_LANE_ENABLE_AUX);
+
+ val = intel_de_read(dev_priv, regs->driver);
+ intel_de_write(dev_priv, regs->driver,
+ val & ~HSW_PWR_WELL_CTL_REQ(pw_idx));
+
+ hsw_wait_for_power_well_disable(dev_priv, power_well);
+}
+
+#if IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM)
+
+static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well,
+ struct intel_digital_port *dig_port)
+{
+ if (drm_WARN_ON(&dev_priv->drm, !dig_port))
+ return;
+
+ if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port))
+ return;
+
+ drm_WARN_ON(&dev_priv->drm, !intel_tc_port_ref_held(dig_port));
+}
+
+#else
+
+static void icl_tc_port_assert_ref_held(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well,
+ struct intel_digital_port *dig_port)
+{
+}
+
+#endif
+
+#define TGL_AUX_PW_TO_TC_PORT(pw_idx) ((pw_idx) - TGL_PW_CTL_IDX_AUX_TC1)
+
+static void icl_tc_cold_exit(struct drm_i915_private *i915)
+{
+ int ret, tries = 0;
+
+ while (1) {
+ ret = snb_pcode_write_timeout(i915, ICL_PCODE_EXIT_TCCOLD, 0,
+ 250, 1);
+ if (ret != -EAGAIN || ++tries == 3)
+ break;
+ msleep(1);
+ }
+
+ /* Spec states that TC cold exit can take up to 1ms to complete */
+ if (!ret)
+ msleep(1);
+
+ /* TODO: turn failure into a error as soon i915 CI updates ICL IFWI */
+ drm_dbg_kms(&i915->drm, "TC cold block %s\n", ret ? "failed" :
+ "succeeded");
+}
+
+static void
+icl_tc_phy_aux_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well);
+ struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch);
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ bool is_tbt = power_well->desc->hsw.is_tc_tbt;
+ bool timeout_expected;
+ u32 val;
+
+ icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port);
+
+ val = intel_de_read(dev_priv, DP_AUX_CH_CTL(aux_ch));
+ val &= ~DP_AUX_CH_CTL_TBT_IO;
+ if (is_tbt)
+ val |= DP_AUX_CH_CTL_TBT_IO;
+ intel_de_write(dev_priv, DP_AUX_CH_CTL(aux_ch), val);
+
+ val = intel_de_read(dev_priv, regs->driver);
+ intel_de_write(dev_priv, regs->driver,
+ val | HSW_PWR_WELL_CTL_REQ(power_well->desc->hsw.idx));
+
+ /*
+ * An AUX timeout is expected if the TBT DP tunnel is down,
+ * or need to enable AUX on a legacy TypeC port as part of the TC-cold
+ * exit sequence.
+ */
+ timeout_expected = is_tbt || intel_tc_cold_requires_aux_pw(dig_port);
+ if (DISPLAY_VER(dev_priv) == 11 && intel_tc_cold_requires_aux_pw(dig_port))
+ icl_tc_cold_exit(dev_priv);
+
+ hsw_wait_for_power_well_enable(dev_priv, power_well, timeout_expected);
+
+ if (DISPLAY_VER(dev_priv) >= 12 && !is_tbt) {
+ enum tc_port tc_port;
+
+ tc_port = TGL_AUX_PW_TO_TC_PORT(power_well->desc->hsw.idx);
+ intel_de_write(dev_priv, HIP_INDEX_REG(tc_port),
+ HIP_INDEX_VAL(tc_port, 0x2));
+
+ if (intel_de_wait_for_set(dev_priv, DKL_CMN_UC_DW_27(tc_port),
+ DKL_CMN_UC_DW27_UC_HEALTH, 1))
+ drm_warn(&dev_priv->drm,
+ "Timeout waiting TC uC health\n");
+ }
+}
+
+static void
+icl_tc_phy_aux_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum aux_ch aux_ch = icl_aux_pw_to_ch(power_well);
+ struct intel_digital_port *dig_port = aux_ch_to_digital_port(dev_priv, aux_ch);
+
+ icl_tc_port_assert_ref_held(dev_priv, power_well, dig_port);
+
+ hsw_power_well_disable(dev_priv, power_well);
+}
+
+static void
+icl_aux_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
+
+ if (intel_phy_is_tc(dev_priv, phy))
+ return icl_tc_phy_aux_power_well_enable(dev_priv, power_well);
+ else if (IS_ICELAKE(dev_priv))
+ return icl_combo_phy_aux_power_well_enable(dev_priv,
+ power_well);
+ else
+ return hsw_power_well_enable(dev_priv, power_well);
+}
+
+static void
+icl_aux_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum phy phy = icl_aux_pw_to_phy(dev_priv, power_well);
+
+ if (intel_phy_is_tc(dev_priv, phy))
+ return icl_tc_phy_aux_power_well_disable(dev_priv, power_well);
+ else if (IS_ICELAKE(dev_priv))
+ return icl_combo_phy_aux_power_well_disable(dev_priv,
+ power_well);
+ else
+ return hsw_power_well_disable(dev_priv, power_well);
+}
+
+/*
+ * We should only use the power well if we explicitly asked the hardware to
+ * enable it, so check if it's enabled and also check if we've requested it to
+ * be enabled.
+ */
+static bool hsw_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ enum i915_power_well_id id = power_well->desc->id;
+ int pw_idx = power_well->desc->hsw.idx;
+ u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx) |
+ HSW_PWR_WELL_CTL_STATE(pw_idx);
+ u32 val;
+
+ val = intel_de_read(dev_priv, regs->driver);
+
+ /*
+ * On GEN9 big core due to a DMC bug the driver's request bits for PW1
+ * and the MISC_IO PW will be not restored, so check instead for the
+ * BIOS's own request bits, which are forced-on for these power wells
+ * when exiting DC5/6.
+ */
+ if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv) &&
+ (id == SKL_DISP_PW_1 || id == SKL_DISP_PW_MISC_IO))
+ val |= intel_de_read(dev_priv, regs->bios);
+
+ return (val & mask) == mask;
+}
+
+static void assert_can_enable_dc9(struct drm_i915_private *dev_priv)
+{
+ drm_WARN_ONCE(&dev_priv->drm,
+ (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC9),
+ "DC9 already programmed to be enabled.\n");
+ drm_WARN_ONCE(&dev_priv->drm,
+ intel_de_read(dev_priv, DC_STATE_EN) &
+ DC_STATE_EN_UPTO_DC5,
+ "DC5 still not disabled to enable DC9.\n");
+ drm_WARN_ONCE(&dev_priv->drm,
+ intel_de_read(dev_priv, HSW_PWR_WELL_CTL2) &
+ HSW_PWR_WELL_CTL_REQ(SKL_PW_CTL_IDX_PW_2),
+ "Power well 2 on.\n");
+ drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv),
+ "Interrupts not disabled yet.\n");
+
+ /*
+ * TODO: check for the following to verify the conditions to enter DC9
+ * state are satisfied:
+ * 1] Check relevant display engine registers to verify if mode set
+ * disable sequence was followed.
+ * 2] Check if display uninitialize sequence is initialized.
+ */
+}
+
+static void assert_can_disable_dc9(struct drm_i915_private *dev_priv)
+{
+ drm_WARN_ONCE(&dev_priv->drm, intel_irqs_enabled(dev_priv),
+ "Interrupts not disabled yet.\n");
+ drm_WARN_ONCE(&dev_priv->drm,
+ intel_de_read(dev_priv, DC_STATE_EN) &
+ DC_STATE_EN_UPTO_DC5,
+ "DC5 still not disabled.\n");
+
+ /*
+ * TODO: check for the following to verify DC9 state was indeed
+ * entered before programming to disable it:
+ * 1] Check relevant display engine registers to verify if mode
+ * set disable sequence was followed.
+ * 2] Check if display uninitialize sequence is initialized.
+ */
+}
+
+static void gen9_write_dc_state(struct drm_i915_private *dev_priv,
+ u32 state)
+{
+ int rewrites = 0;
+ int rereads = 0;
+ u32 v;
+
+ intel_de_write(dev_priv, DC_STATE_EN, state);
+
+ /* It has been observed that disabling the dc6 state sometimes
+ * doesn't stick and dmc keeps returning old value. Make sure
+ * the write really sticks enough times and also force rewrite until
+ * we are confident that state is exactly what we want.
+ */
+ do {
+ v = intel_de_read(dev_priv, DC_STATE_EN);
+
+ if (v != state) {
+ intel_de_write(dev_priv, DC_STATE_EN, state);
+ rewrites++;
+ rereads = 0;
+ } else if (rereads++ > 5) {
+ break;
+ }
+
+ } while (rewrites < 100);
+
+ if (v != state)
+ drm_err(&dev_priv->drm,
+ "Writing dc state to 0x%x failed, now 0x%x\n",
+ state, v);
+
+ /* Most of the times we need one retry, avoid spam */
+ if (rewrites > 1)
+ drm_dbg_kms(&dev_priv->drm,
+ "Rewrote dc state to 0x%x %d times\n",
+ state, rewrites);
+}
+
+static u32 gen9_dc_mask(struct drm_i915_private *dev_priv)
+{
+ u32 mask;
+
+ mask = DC_STATE_EN_UPTO_DC5;
+
+ if (DISPLAY_VER(dev_priv) >= 12)
+ mask |= DC_STATE_EN_DC3CO | DC_STATE_EN_UPTO_DC6
+ | DC_STATE_EN_DC9;
+ else if (DISPLAY_VER(dev_priv) == 11)
+ mask |= DC_STATE_EN_UPTO_DC6 | DC_STATE_EN_DC9;
+ else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
+ mask |= DC_STATE_EN_DC9;
+ else
+ mask |= DC_STATE_EN_UPTO_DC6;
+
+ return mask;
+}
+
+void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ if (!HAS_DISPLAY(dev_priv))
+ return;
+
+ val = intel_de_read(dev_priv, DC_STATE_EN) & gen9_dc_mask(dev_priv);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "Resetting DC state tracking from %02x to %02x\n",
+ dev_priv->dmc.dc_state, val);
+ dev_priv->dmc.dc_state = val;
+}
+
+/**
+ * gen9_set_dc_state - set target display C power state
+ * @dev_priv: i915 device instance
+ * @state: target DC power state
+ * - DC_STATE_DISABLE
+ * - DC_STATE_EN_UPTO_DC5
+ * - DC_STATE_EN_UPTO_DC6
+ * - DC_STATE_EN_DC9
+ *
+ * Signal to DMC firmware/HW the target DC power state passed in @state.
+ * DMC/HW can turn off individual display clocks and power rails when entering
+ * a deeper DC power state (higher in number) and turns these back when exiting
+ * that state to a shallower power state (lower in number). The HW will decide
+ * when to actually enter a given state on an on-demand basis, for instance
+ * depending on the active state of display pipes. The state of display
+ * registers backed by affected power rails are saved/restored as needed.
+ *
+ * Based on the above enabling a deeper DC power state is asynchronous wrt.
+ * enabling it. Disabling a deeper power state is synchronous: for instance
+ * setting %DC_STATE_DISABLE won't complete until all HW resources are turned
+ * back on and register state is restored. This is guaranteed by the MMIO write
+ * to DC_STATE_EN blocking until the state is restored.
+ */
+void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state)
+{
+ u32 val;
+ u32 mask;
+
+ if (!HAS_DISPLAY(dev_priv))
+ return;
+
+ if (drm_WARN_ON_ONCE(&dev_priv->drm,
+ state & ~dev_priv->dmc.allowed_dc_mask))
+ state &= dev_priv->dmc.allowed_dc_mask;
+
+ val = intel_de_read(dev_priv, DC_STATE_EN);
+ mask = gen9_dc_mask(dev_priv);
+ drm_dbg_kms(&dev_priv->drm, "Setting DC state from %02x to %02x\n",
+ val & mask, state);
+
+ /* Check if DMC is ignoring our DC state requests */
+ if ((val & mask) != dev_priv->dmc.dc_state)
+ drm_err(&dev_priv->drm, "DC state mismatch (0x%x -> 0x%x)\n",
+ dev_priv->dmc.dc_state, val & mask);
+
+ val &= ~mask;
+ val |= state;
+
+ gen9_write_dc_state(dev_priv, val);
+
+ dev_priv->dmc.dc_state = val & mask;
+}
+
+static void tgl_enable_dc3co(struct drm_i915_private *dev_priv)
+{
+ drm_dbg_kms(&dev_priv->drm, "Enabling DC3CO\n");
+ gen9_set_dc_state(dev_priv, DC_STATE_EN_DC3CO);
+}
+
+static void tgl_disable_dc3co(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ drm_dbg_kms(&dev_priv->drm, "Disabling DC3CO\n");
+ val = intel_de_read(dev_priv, DC_STATE_EN);
+ val &= ~DC_STATE_DC3CO_STATUS;
+ intel_de_write(dev_priv, DC_STATE_EN, val);
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+ /*
+ * Delay of 200us DC3CO Exit time B.Spec 49196
+ */
+ usleep_range(200, 210);
+}
+
+static void assert_dmc_loaded(struct drm_i915_private *dev_priv)
+{
+ drm_WARN_ONCE(&dev_priv->drm,
+ !intel_de_read(dev_priv,
+ DMC_PROGRAM(dev_priv->dmc.dmc_info[DMC_FW_MAIN].start_mmioaddr, 0)),
+ "DMC program storage start is NULL\n");
+ drm_WARN_ONCE(&dev_priv->drm, !intel_de_read(dev_priv, DMC_SSP_BASE),
+ "DMC SSP Base Not fine\n");
+ drm_WARN_ONCE(&dev_priv->drm, !intel_de_read(dev_priv, DMC_HTP_SKL),
+ "DMC HTP Not fine\n");
+}
+
+static void assert_can_enable_dc5(struct drm_i915_private *dev_priv)
+{
+ enum i915_power_well_id high_pg;
+
+ /* Power wells at this level and above must be disabled for DC5 entry */
+ if (DISPLAY_VER(dev_priv) == 12)
+ high_pg = ICL_DISP_PW_3;
+ else
+ high_pg = SKL_DISP_PW_2;
+
+ drm_WARN_ONCE(&dev_priv->drm,
+ intel_display_power_well_is_enabled(dev_priv, high_pg),
+ "Power wells above platform's DC5 limit still enabled.\n");
+
+ drm_WARN_ONCE(&dev_priv->drm,
+ (intel_de_read(dev_priv, DC_STATE_EN) &
+ DC_STATE_EN_UPTO_DC5),
+ "DC5 already programmed to be enabled.\n");
+ assert_rpm_wakelock_held(&dev_priv->runtime_pm);
+
+ assert_dmc_loaded(dev_priv);
+}
+
+void gen9_enable_dc5(struct drm_i915_private *dev_priv)
+{
+ assert_can_enable_dc5(dev_priv);
+
+ drm_dbg_kms(&dev_priv->drm, "Enabling DC5\n");
+
+ /* Wa Display #1183: skl,kbl,cfl */
+ if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv))
+ intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1,
+ intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT);
+
+ gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC5);
+}
+
+static void assert_can_enable_dc6(struct drm_i915_private *dev_priv)
+{
+ drm_WARN_ONCE(&dev_priv->drm,
+ intel_de_read(dev_priv, UTIL_PIN_CTL) & UTIL_PIN_ENABLE,
+ "Backlight is not disabled.\n");
+ drm_WARN_ONCE(&dev_priv->drm,
+ (intel_de_read(dev_priv, DC_STATE_EN) &
+ DC_STATE_EN_UPTO_DC6),
+ "DC6 already programmed to be enabled.\n");
+
+ assert_dmc_loaded(dev_priv);
+}
+
+void skl_enable_dc6(struct drm_i915_private *dev_priv)
+{
+ assert_can_enable_dc6(dev_priv);
+
+ drm_dbg_kms(&dev_priv->drm, "Enabling DC6\n");
+
+ /* Wa Display #1183: skl,kbl,cfl */
+ if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv))
+ intel_de_write(dev_priv, GEN8_CHICKEN_DCPR_1,
+ intel_de_read(dev_priv, GEN8_CHICKEN_DCPR_1) | SKL_SELECT_ALTERNATE_DC_EXIT);
+
+ gen9_set_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6);
+}
+
+void bxt_enable_dc9(struct drm_i915_private *dev_priv)
+{
+ assert_can_enable_dc9(dev_priv);
+
+ drm_dbg_kms(&dev_priv->drm, "Enabling DC9\n");
+ /*
+ * Power sequencer reset is not needed on
+ * platforms with South Display Engine on PCH,
+ * because PPS registers are always on.
+ */
+ if (!HAS_PCH_SPLIT(dev_priv))
+ intel_pps_reset_all(dev_priv);
+ gen9_set_dc_state(dev_priv, DC_STATE_EN_DC9);
+}
+
+void bxt_disable_dc9(struct drm_i915_private *dev_priv)
+{
+ assert_can_disable_dc9(dev_priv);
+
+ drm_dbg_kms(&dev_priv->drm, "Disabling DC9\n");
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ intel_pps_unlock_regs_wa(dev_priv);
+}
+
+static void hsw_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ const struct i915_power_well_regs *regs = power_well->desc->ops->regs;
+ int pw_idx = power_well->desc->hsw.idx;
+ u32 mask = HSW_PWR_WELL_CTL_REQ(pw_idx);
+ u32 bios_req = intel_de_read(dev_priv, regs->bios);
+
+ /* Take over the request bit if set by BIOS. */
+ if (bios_req & mask) {
+ u32 drv_req = intel_de_read(dev_priv, regs->driver);
+
+ if (!(drv_req & mask))
+ intel_de_write(dev_priv, regs->driver, drv_req | mask);
+ intel_de_write(dev_priv, regs->bios, bios_req & ~mask);
+ }
+}
+
+static void bxt_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ bxt_ddi_phy_init(dev_priv, power_well->desc->bxt.phy);
+}
+
+static void bxt_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ bxt_ddi_phy_uninit(dev_priv, power_well->desc->bxt.phy);
+}
+
+static bool bxt_dpio_cmn_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return bxt_ddi_phy_is_enabled(dev_priv, power_well->desc->bxt.phy);
+}
+
+static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_well *power_well;
+
+ power_well = lookup_power_well(dev_priv, BXT_DISP_PW_DPIO_CMN_A);
+ if (intel_power_well_refcount(power_well) > 0)
+ bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
+
+ power_well = lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC);
+ if (intel_power_well_refcount(power_well) > 0)
+ bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
+
+ if (IS_GEMINILAKE(dev_priv)) {
+ power_well = lookup_power_well(dev_priv,
+ GLK_DISP_PW_DPIO_CMN_C);
+ if (intel_power_well_refcount(power_well) > 0)
+ bxt_ddi_phy_verify_state(dev_priv,
+ power_well->desc->bxt.phy);
+ }
+}
+
+static bool gen9_dc_off_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return ((intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_DC3CO) == 0 &&
+ (intel_de_read(dev_priv, DC_STATE_EN) & DC_STATE_EN_UPTO_DC5_DC6_MASK) == 0);
+}
+
+static void gen9_assert_dbuf_enabled(struct drm_i915_private *dev_priv)
+{
+ u8 hw_enabled_dbuf_slices = intel_enabled_dbuf_slices_mask(dev_priv);
+ u8 enabled_dbuf_slices = dev_priv->dbuf.enabled_slices;
+
+ drm_WARN(&dev_priv->drm,
+ hw_enabled_dbuf_slices != enabled_dbuf_slices,
+ "Unexpected DBuf power power state (0x%08x, expected 0x%08x)\n",
+ hw_enabled_dbuf_slices,
+ enabled_dbuf_slices);
+}
+
+void gen9_disable_dc_states(struct drm_i915_private *dev_priv)
+{
+ struct intel_cdclk_config cdclk_config = {};
+
+ if (dev_priv->dmc.target_dc_state == DC_STATE_EN_DC3CO) {
+ tgl_disable_dc3co(dev_priv);
+ return;
+ }
+
+ gen9_set_dc_state(dev_priv, DC_STATE_DISABLE);
+
+ if (!HAS_DISPLAY(dev_priv))
+ return;
+
+ intel_cdclk_get_cdclk(dev_priv, &cdclk_config);
+ /* Can't read out voltage_level so can't use intel_cdclk_changed() */
+ drm_WARN_ON(&dev_priv->drm,
+ intel_cdclk_needs_modeset(&dev_priv->cdclk.hw,
+ &cdclk_config));
+
+ gen9_assert_dbuf_enabled(dev_priv);
+
+ if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
+ bxt_verify_ddi_phy_power_wells(dev_priv);
+
+ if (DISPLAY_VER(dev_priv) >= 11)
+ /*
+ * DMC retains HW context only for port A, the other combo
+ * PHY's HW context for port B is lost after DC transitions,
+ * so we need to restore it manually.
+ */
+ intel_combo_phy_init(dev_priv);
+}
+
+static void gen9_dc_off_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ gen9_disable_dc_states(dev_priv);
+}
+
+static void gen9_dc_off_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (!intel_dmc_has_payload(dev_priv))
+ return;
+
+ switch (dev_priv->dmc.target_dc_state) {
+ case DC_STATE_EN_DC3CO:
+ tgl_enable_dc3co(dev_priv);
+ break;
+ case DC_STATE_EN_UPTO_DC6:
+ skl_enable_dc6(dev_priv);
+ break;
+ case DC_STATE_EN_UPTO_DC5:
+ gen9_enable_dc5(dev_priv);
+ break;
+ }
+}
+
+static void i9xx_power_well_sync_hw_noop(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+}
+
+static void i9xx_always_on_power_well_noop(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+}
+
+static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return true;
+}
+
+static void i830_pipes_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if ((intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE) == 0)
+ i830_enable_pipe(dev_priv, PIPE_A);
+ if ((intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE) == 0)
+ i830_enable_pipe(dev_priv, PIPE_B);
+}
+
+static void i830_pipes_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ i830_disable_pipe(dev_priv, PIPE_B);
+ i830_disable_pipe(dev_priv, PIPE_A);
+}
+
+static bool i830_pipes_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ return intel_de_read(dev_priv, PIPECONF(PIPE_A)) & PIPECONF_ENABLE &&
+ intel_de_read(dev_priv, PIPECONF(PIPE_B)) & PIPECONF_ENABLE;
+}
+
+static void i830_pipes_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ if (intel_power_well_refcount(power_well) > 0)
+ i830_pipes_power_well_enable(dev_priv, power_well);
+ else
+ i830_pipes_power_well_disable(dev_priv, power_well);
+}
+
+static void vlv_set_power_well(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well, bool enable)
+{
+ int pw_idx = power_well->desc->vlv.idx;
+ u32 mask;
+ u32 state;
+ u32 ctrl;
+
+ mask = PUNIT_PWRGT_MASK(pw_idx);
+ state = enable ? PUNIT_PWRGT_PWR_ON(pw_idx) :
+ PUNIT_PWRGT_PWR_GATE(pw_idx);
+
+ vlv_punit_get(dev_priv);
+
+#define COND \
+ ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
+
+ if (COND)
+ goto out;
+
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
+ ctrl &= ~mask;
+ ctrl |= state;
+ vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
+
+ if (wait_for(COND, 100))
+ drm_err(&dev_priv->drm,
+ "timeout setting power well state %08x (%08x)\n",
+ state,
+ vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
+
+#undef COND
+
+out:
+ vlv_punit_put(dev_priv);
+}
+
+static void vlv_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_set_power_well(dev_priv, power_well, true);
+}
+
+static void vlv_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static bool vlv_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ int pw_idx = power_well->desc->vlv.idx;
+ bool enabled = false;
+ u32 mask;
+ u32 state;
+ u32 ctrl;
+
+ mask = PUNIT_PWRGT_MASK(pw_idx);
+ ctrl = PUNIT_PWRGT_PWR_ON(pw_idx);
+
+ vlv_punit_get(dev_priv);
+
+ state = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask;
+ /*
+ * We only ever set the power-on and power-gate states, anything
+ * else is unexpected.
+ */
+ drm_WARN_ON(&dev_priv->drm, state != PUNIT_PWRGT_PWR_ON(pw_idx) &&
+ state != PUNIT_PWRGT_PWR_GATE(pw_idx));
+ if (state == ctrl)
+ enabled = true;
+
+ /*
+ * A transient state at this point would mean some unexpected party
+ * is poking at the power controls too.
+ */
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL) & mask;
+ drm_WARN_ON(&dev_priv->drm, ctrl != state);
+
+ vlv_punit_put(dev_priv);
+
+ return enabled;
+}
+
+static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
+{
+ u32 val;
+
+ /*
+ * On driver load, a pipe may be active and driving a DSI display.
+ * Preserve DPOUNIT_CLOCK_GATE_DISABLE to avoid the pipe getting stuck
+ * (and never recovering) in this case. intel_dsi_post_disable() will
+ * clear it when we turn off the display.
+ */
+ val = intel_de_read(dev_priv, DSPCLK_GATE_D);
+ val &= DPOUNIT_CLOCK_GATE_DISABLE;
+ val |= VRHUNIT_CLOCK_GATE_DISABLE;
+ intel_de_write(dev_priv, DSPCLK_GATE_D, val);
+
+ /*
+ * Disable trickle feed and enable pnd deadline calculation
+ */
+ intel_de_write(dev_priv, MI_ARB_VLV,
+ MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
+ intel_de_write(dev_priv, CBR1_VLV, 0);
+
+ drm_WARN_ON(&dev_priv->drm, RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
+ intel_de_write(dev_priv, RAWCLK_FREQ_VLV,
+ DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq,
+ 1000));
+}
+
+static void vlv_display_power_well_init(struct drm_i915_private *dev_priv)
+{
+ struct intel_encoder *encoder;
+ enum pipe pipe;
+
+ /*
+ * Enable the CRI clock source so we can get at the
+ * display and the reference clock for VGA
+ * hotplug / manual detection. Supposedly DSI also
+ * needs the ref clock up and running.
+ *
+ * CHV DPLL B/C have some issues if VGA mode is enabled.
+ */
+ for_each_pipe(dev_priv, pipe) {
+ u32 val = intel_de_read(dev_priv, DPLL(pipe));
+
+ val |= DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
+ if (pipe != PIPE_A)
+ val |= DPLL_INTEGRATED_CRI_CLK_VLV;
+
+ intel_de_write(dev_priv, DPLL(pipe), val);
+ }
+
+ vlv_init_display_clock_gating(dev_priv);
+
+ spin_lock_irq(&dev_priv->irq_lock);
+ valleyview_enable_display_irqs(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ /*
+ * During driver initialization/resume we can avoid restoring the
+ * part of the HW/SW state that will be inited anyway explicitly.
+ */
+ if (dev_priv->power_domains.initializing)
+ return;
+
+ intel_hpd_init(dev_priv);
+ intel_hpd_poll_disable(dev_priv);
+
+ /* Re-enable the ADPA, if we have one */
+ for_each_intel_encoder(&dev_priv->drm, encoder) {
+ if (encoder->type == INTEL_OUTPUT_ANALOG)
+ intel_crt_reset(&encoder->base);
+ }
+
+ intel_vga_redisable_power_on(dev_priv);
+
+ intel_pps_unlock_regs_wa(dev_priv);
+}
+
+static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv)
+{
+ spin_lock_irq(&dev_priv->irq_lock);
+ valleyview_disable_display_irqs(dev_priv);
+ spin_unlock_irq(&dev_priv->irq_lock);
+
+ /* make sure we're done processing display irqs */
+ intel_synchronize_irq(dev_priv);
+
+ intel_pps_reset_all(dev_priv);
+
+ /* Prevent us from re-enabling polling on accident in late suspend */
+ if (!dev_priv->drm.dev->power.is_suspended)
+ intel_hpd_poll_enable(dev_priv);
+}
+
+static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ vlv_display_power_well_init(dev_priv);
+}
+
+static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_display_power_well_deinit(dev_priv);
+
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
+static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ /* since ref/cri clock was enabled */
+ udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ /*
+ * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+ * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
+ * a. GUnit 0x2110 bit[0] set to 1 (def 0)
+ * b. The other bits such as sfr settings / modesel may all
+ * be set to 0.
+ *
+ * This should only be done on init and resume from S3 with
+ * both PLLs disabled, or we risk losing DPIO and PLL
+ * synchronization.
+ */
+ intel_de_write(dev_priv, DPIO_CTL,
+ intel_de_read(dev_priv, DPIO_CTL) | DPIO_CMNRST);
+}
+
+static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum pipe pipe;
+
+ for_each_pipe(dev_priv, pipe)
+ assert_pll_disabled(dev_priv, pipe);
+
+ /* Assert common reset */
+ intel_de_write(dev_priv, DPIO_CTL,
+ intel_de_read(dev_priv, DPIO_CTL) & ~DPIO_CMNRST);
+
+ vlv_set_power_well(dev_priv, power_well, false);
+}
+
+#define POWER_DOMAIN_MASK (GENMASK_ULL(POWER_DOMAIN_NUM - 1, 0))
+
+#define BITS_SET(val, bits) (((val) & (bits)) == (bits))
+
+static void assert_chv_phy_status(struct drm_i915_private *dev_priv)
+{
+ struct i915_power_well *cmn_bc =
+ lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC);
+ struct i915_power_well *cmn_d =
+ lookup_power_well(dev_priv, CHV_DISP_PW_DPIO_CMN_D);
+ u32 phy_control = dev_priv->chv_phy_control;
+ u32 phy_status = 0;
+ u32 phy_status_mask = 0xffffffff;
+
+ /*
+ * The BIOS can leave the PHY is some weird state
+ * where it doesn't fully power down some parts.
+ * Disable the asserts until the PHY has been fully
+ * reset (ie. the power well has been disabled at
+ * least once).
+ */
+ if (!dev_priv->chv_phy_assert[DPIO_PHY0])
+ phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1) |
+ PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1));
+
+ if (!dev_priv->chv_phy_assert[DPIO_PHY1])
+ phy_status_mask &= ~(PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0) |
+ PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1));
+
+ if (intel_power_well_is_enabled(dev_priv, cmn_bc)) {
+ phy_status |= PHY_POWERGOOD(DPIO_PHY0);
+
+ /* this assumes override is only used to enable lanes */
+ if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH0)) == 0)
+ phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0);
+
+ if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY0, DPIO_CH1)) == 0)
+ phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1);
+
+ /* CL1 is on whenever anything is on in either channel */
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH0) |
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)))
+ phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH0);
+
+ /*
+ * The DPLLB check accounts for the pipe B + port A usage
+ * with CL2 powered up but all the lanes in the second channel
+ * powered down.
+ */
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY0, DPIO_CH1)) &&
+ (intel_de_read(dev_priv, DPLL(PIPE_B)) & DPLL_VCO_ENABLE) == 0)
+ phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY0, DPIO_CH1);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 0);
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH0, 1);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY0, DPIO_CH1)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 0);
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY0, DPIO_CH1)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY0, DPIO_CH1, 1);
+ }
+
+ if (intel_power_well_is_enabled(dev_priv, cmn_d)) {
+ phy_status |= PHY_POWERGOOD(DPIO_PHY1);
+
+ /* this assumes override is only used to enable lanes */
+ if ((phy_control & PHY_CH_POWER_DOWN_OVRD_EN(DPIO_PHY1, DPIO_CH0)) == 0)
+ phy_control |= PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xf, DPIO_PHY1, DPIO_CH0)))
+ phy_status |= PHY_STATUS_CMN_LDO(DPIO_PHY1, DPIO_CH0);
+
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0x3, DPIO_PHY1, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 0);
+ if (BITS_SET(phy_control,
+ PHY_CH_POWER_DOWN_OVRD(0xc, DPIO_PHY1, DPIO_CH0)))
+ phy_status |= PHY_STATUS_SPLINE_LDO(DPIO_PHY1, DPIO_CH0, 1);
+ }
+
+ phy_status &= phy_status_mask;
+
+ /*
+ * The PHY may be busy with some initial calibration and whatnot,
+ * so the power state can take a while to actually change.
+ */
+ if (intel_de_wait_for_register(dev_priv, DISPLAY_PHY_STATUS,
+ phy_status_mask, phy_status, 10))
+ drm_err(&dev_priv->drm,
+ "Unexpected PHY_STATUS 0x%08x, expected 0x%08x (PHY_CONTROL=0x%08x)\n",
+ intel_de_read(dev_priv, DISPLAY_PHY_STATUS) & phy_status_mask,
+ phy_status, dev_priv->chv_phy_control);
+}
+
+#undef BITS_SET
+
+static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum dpio_phy phy;
+ enum pipe pipe;
+ u32 tmp;
+
+ drm_WARN_ON_ONCE(&dev_priv->drm,
+ power_well->desc->id != VLV_DISP_PW_DPIO_CMN_BC &&
+ power_well->desc->id != CHV_DISP_PW_DPIO_CMN_D);
+
+ if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) {
+ pipe = PIPE_A;
+ phy = DPIO_PHY0;
+ } else {
+ pipe = PIPE_C;
+ phy = DPIO_PHY1;
+ }
+
+ /* since ref/cri clock was enabled */
+ udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
+ vlv_set_power_well(dev_priv, power_well, true);
+
+ /* Poll for phypwrgood signal */
+ if (intel_de_wait_for_set(dev_priv, DISPLAY_PHY_STATUS,
+ PHY_POWERGOOD(phy), 1))
+ drm_err(&dev_priv->drm, "Display PHY %d is not power up\n",
+ phy);
+
+ vlv_dpio_get(dev_priv);
+
+ /* Enable dynamic power down */
+ tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW28);
+ tmp |= DPIO_DYNPWRDOWNEN_CH0 | DPIO_CL1POWERDOWNEN |
+ DPIO_SUS_CLK_CONFIG_GATE_CLKREQ;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW28, tmp);
+
+ if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) {
+ tmp = vlv_dpio_read(dev_priv, pipe, _CHV_CMN_DW6_CH1);
+ tmp |= DPIO_DYNPWRDOWNEN_CH1;
+ vlv_dpio_write(dev_priv, pipe, _CHV_CMN_DW6_CH1, tmp);
+ } else {
+ /*
+ * Force the non-existing CL2 off. BXT does this
+ * too, so maybe it saves some power even though
+ * CL2 doesn't exist?
+ */
+ tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW30);
+ tmp |= DPIO_CL2_LDOFUSE_PWRENB;
+ vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW30, tmp);
+ }
+
+ vlv_dpio_put(dev_priv);
+
+ dev_priv->chv_phy_control |= PHY_COM_LANE_RESET_DEASSERT(phy);
+ intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
+ dev_priv->chv_phy_control);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "Enabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
+ phy, dev_priv->chv_phy_control);
+
+ assert_chv_phy_status(dev_priv);
+}
+
+static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum dpio_phy phy;
+
+ drm_WARN_ON_ONCE(&dev_priv->drm,
+ power_well->desc->id != VLV_DISP_PW_DPIO_CMN_BC &&
+ power_well->desc->id != CHV_DISP_PW_DPIO_CMN_D);
+
+ if (power_well->desc->id == VLV_DISP_PW_DPIO_CMN_BC) {
+ phy = DPIO_PHY0;
+ assert_pll_disabled(dev_priv, PIPE_A);
+ assert_pll_disabled(dev_priv, PIPE_B);
+ } else {
+ phy = DPIO_PHY1;
+ assert_pll_disabled(dev_priv, PIPE_C);
+ }
+
+ dev_priv->chv_phy_control &= ~PHY_COM_LANE_RESET_DEASSERT(phy);
+ intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
+ dev_priv->chv_phy_control);
+
+ vlv_set_power_well(dev_priv, power_well, false);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "Disabled DPIO PHY%d (PHY_CONTROL=0x%08x)\n",
+ phy, dev_priv->chv_phy_control);
+
+ /* PHY is fully reset now, so we can enable the PHY state asserts */
+ dev_priv->chv_phy_assert[phy] = true;
+
+ assert_chv_phy_status(dev_priv);
+}
+
+static void assert_chv_phy_powergate(struct drm_i915_private *dev_priv, enum dpio_phy phy,
+ enum dpio_channel ch, bool override, unsigned int mask)
+{
+ enum pipe pipe = phy == DPIO_PHY0 ? PIPE_A : PIPE_C;
+ u32 reg, val, expected, actual;
+
+ /*
+ * The BIOS can leave the PHY is some weird state
+ * where it doesn't fully power down some parts.
+ * Disable the asserts until the PHY has been fully
+ * reset (ie. the power well has been disabled at
+ * least once).
+ */
+ if (!dev_priv->chv_phy_assert[phy])
+ return;
+
+ if (ch == DPIO_CH0)
+ reg = _CHV_CMN_DW0_CH0;
+ else
+ reg = _CHV_CMN_DW6_CH1;
+
+ vlv_dpio_get(dev_priv);
+ val = vlv_dpio_read(dev_priv, pipe, reg);
+ vlv_dpio_put(dev_priv);
+
+ /*
+ * This assumes !override is only used when the port is disabled.
+ * All lanes should power down even without the override when
+ * the port is disabled.
+ */
+ if (!override || mask == 0xf) {
+ expected = DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
+ /*
+ * If CH1 common lane is not active anymore
+ * (eg. for pipe B DPLL) the entire channel will
+ * shut down, which causes the common lane registers
+ * to read as 0. That means we can't actually check
+ * the lane power down status bits, but as the entire
+ * register reads as 0 it's a good indication that the
+ * channel is indeed entirely powered down.
+ */
+ if (ch == DPIO_CH1 && val == 0)
+ expected = 0;
+ } else if (mask != 0x0) {
+ expected = DPIO_ANYDL_POWERDOWN;
+ } else {
+ expected = 0;
+ }
+
+ if (ch == DPIO_CH0)
+ actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH0;
+ else
+ actual = val >> DPIO_ANYDL_POWERDOWN_SHIFT_CH1;
+ actual &= DPIO_ALLDL_POWERDOWN | DPIO_ANYDL_POWERDOWN;
+
+ drm_WARN(&dev_priv->drm, actual != expected,
+ "Unexpected DPIO lane power down: all %d, any %d. Expected: all %d, any %d. (0x%x = 0x%08x)\n",
+ !!(actual & DPIO_ALLDL_POWERDOWN),
+ !!(actual & DPIO_ANYDL_POWERDOWN),
+ !!(expected & DPIO_ALLDL_POWERDOWN),
+ !!(expected & DPIO_ANYDL_POWERDOWN),
+ reg, val);
+}
+
+bool chv_phy_powergate_ch(struct drm_i915_private *dev_priv, enum dpio_phy phy,
+ enum dpio_channel ch, bool override)
+{
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ bool was_override;
+
+ mutex_lock(&power_domains->lock);
+
+ was_override = dev_priv->chv_phy_control & PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+
+ if (override == was_override)
+ goto out;
+
+ if (override)
+ dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+ else
+ dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+
+ intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
+ dev_priv->chv_phy_control);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "Power gating DPIO PHY%d CH%d (DPIO_PHY_CONTROL=0x%08x)\n",
+ phy, ch, dev_priv->chv_phy_control);
+
+ assert_chv_phy_status(dev_priv);
+
+out:
+ mutex_unlock(&power_domains->lock);
+
+ return was_override;
+}
+
+void chv_phy_powergate_lanes(struct intel_encoder *encoder,
+ bool override, unsigned int mask)
+{
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+ struct i915_power_domains *power_domains = &dev_priv->power_domains;
+ enum dpio_phy phy = vlv_dig_port_to_phy(enc_to_dig_port(encoder));
+ enum dpio_channel ch = vlv_dig_port_to_channel(enc_to_dig_port(encoder));
+
+ mutex_lock(&power_domains->lock);
+
+ dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD(0xf, phy, ch);
+ dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD(mask, phy, ch);
+
+ if (override)
+ dev_priv->chv_phy_control |= PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+ else
+ dev_priv->chv_phy_control &= ~PHY_CH_POWER_DOWN_OVRD_EN(phy, ch);
+
+ intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
+ dev_priv->chv_phy_control);
+
+ drm_dbg_kms(&dev_priv->drm,
+ "Power gating DPIO PHY%d CH%d lanes 0x%x (PHY_CONTROL=0x%08x)\n",
+ phy, ch, mask, dev_priv->chv_phy_control);
+
+ assert_chv_phy_status(dev_priv);
+
+ assert_chv_phy_powergate(dev_priv, phy, ch, override, mask);
+
+ mutex_unlock(&power_domains->lock);
+}
+
+static bool chv_pipe_power_well_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ enum pipe pipe = PIPE_A;
+ bool enabled;
+ u32 state, ctrl;
+
+ vlv_punit_get(dev_priv);
+
+ state = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe);
+ /*
+ * We only ever set the power-on and power-gate states, anything
+ * else is unexpected.
+ */
+ drm_WARN_ON(&dev_priv->drm, state != DP_SSS_PWR_ON(pipe) &&
+ state != DP_SSS_PWR_GATE(pipe));
+ enabled = state == DP_SSS_PWR_ON(pipe);
+
+ /*
+ * A transient state at this point would mean some unexpected party
+ * is poking at the power controls too.
+ */
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSC_MASK(pipe);
+ drm_WARN_ON(&dev_priv->drm, ctrl << 16 != state);
+
+ vlv_punit_put(dev_priv);
+
+ return enabled;
+}
+
+static void chv_set_pipe_power_well(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well,
+ bool enable)
+{
+ enum pipe pipe = PIPE_A;
+ u32 state;
+ u32 ctrl;
+
+ state = enable ? DP_SSS_PWR_ON(pipe) : DP_SSS_PWR_GATE(pipe);
+
+ vlv_punit_get(dev_priv);
+
+#define COND \
+ ((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) & DP_SSS_MASK(pipe)) == state)
+
+ if (COND)
+ goto out;
+
+ ctrl = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
+ ctrl &= ~DP_SSC_MASK(pipe);
+ ctrl |= enable ? DP_SSC_PWR_ON(pipe) : DP_SSC_PWR_GATE(pipe);
+ vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, ctrl);
+
+ if (wait_for(COND, 100))
+ drm_err(&dev_priv->drm,
+ "timeout setting power well state %08x (%08x)\n",
+ state,
+ vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM));
+
+#undef COND
+
+out:
+ vlv_punit_put(dev_priv);
+}
+
+static void chv_pipe_power_well_sync_hw(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ intel_de_write(dev_priv, DISPLAY_PHY_CONTROL,
+ dev_priv->chv_phy_control);
+}
+
+static void chv_pipe_power_well_enable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ chv_set_pipe_power_well(dev_priv, power_well, true);
+
+ vlv_display_power_well_init(dev_priv);
+}
+
+static void chv_pipe_power_well_disable(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ vlv_display_power_well_deinit(dev_priv);
+
+ chv_set_pipe_power_well(dev_priv, power_well, false);
+}
+
+static void
+tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
+{
+ u8 tries = 0;
+ int ret;
+
+ while (1) {
+ u32 low_val;
+ u32 high_val = 0;
+
+ if (block)
+ low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ;
+ else
+ low_val = TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ;
+
+ /*
+ * Spec states that we should timeout the request after 200us
+ * but the function below will timeout after 500us
+ */
+ ret = snb_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val, &high_val);
+ if (ret == 0) {
+ if (block &&
+ (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED))
+ ret = -EIO;
+ else
+ break;
+ }
+
+ if (++tries == 3)
+ break;
+
+ msleep(1);
+ }
+
+ if (ret)
+ drm_err(&i915->drm, "TC cold %sblock failed\n",
+ block ? "" : "un");
+ else
+ drm_dbg_kms(&i915->drm, "TC cold %sblock succeeded\n",
+ block ? "" : "un");
+}
+
+static void
+tgl_tc_cold_off_power_well_enable(struct drm_i915_private *i915,
+ struct i915_power_well *power_well)
+{
+ tgl_tc_cold_request(i915, true);
+}
+
+static void
+tgl_tc_cold_off_power_well_disable(struct drm_i915_private *i915,
+ struct i915_power_well *power_well)
+{
+ tgl_tc_cold_request(i915, false);
+}
+
+static void
+tgl_tc_cold_off_power_well_sync_hw(struct drm_i915_private *i915,
+ struct i915_power_well *power_well)
+{
+ if (intel_power_well_refcount(power_well) > 0)
+ tgl_tc_cold_off_power_well_enable(i915, power_well);
+ else
+ tgl_tc_cold_off_power_well_disable(i915, power_well);
+}
+
+static bool
+tgl_tc_cold_off_power_well_is_enabled(struct drm_i915_private *dev_priv,
+ struct i915_power_well *power_well)
+{
+ /*
+ * Not the correctly implementation but there is no way to just read it
+ * from PCODE, so returning count to avoid state mismatch errors
+ */
+ return intel_power_well_refcount(power_well);
+}
+
+
+const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = i9xx_always_on_power_well_noop,
+ .disable = i9xx_always_on_power_well_noop,
+ .is_enabled = i9xx_always_on_power_well_enabled,
+};
+
+const struct i915_power_well_ops chv_pipe_power_well_ops = {
+ .sync_hw = chv_pipe_power_well_sync_hw,
+ .enable = chv_pipe_power_well_enable,
+ .disable = chv_pipe_power_well_disable,
+ .is_enabled = chv_pipe_power_well_enabled,
+};
+
+const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = chv_dpio_cmn_power_well_enable,
+ .disable = chv_dpio_cmn_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+const struct i915_power_well_ops i830_pipes_power_well_ops = {
+ .sync_hw = i830_pipes_power_well_sync_hw,
+ .enable = i830_pipes_power_well_enable,
+ .disable = i830_pipes_power_well_disable,
+ .is_enabled = i830_pipes_power_well_enabled,
+};
+
+static const struct i915_power_well_regs hsw_power_well_regs = {
+ .bios = HSW_PWR_WELL_CTL1,
+ .driver = HSW_PWR_WELL_CTL2,
+ .kvmr = HSW_PWR_WELL_CTL3,
+ .debug = HSW_PWR_WELL_CTL4,
+};
+
+const struct i915_power_well_ops hsw_power_well_ops = {
+ .regs = &hsw_power_well_regs,
+ .sync_hw = hsw_power_well_sync_hw,
+ .enable = hsw_power_well_enable,
+ .disable = hsw_power_well_disable,
+ .is_enabled = hsw_power_well_enabled,
+};
+
+const struct i915_power_well_ops gen9_dc_off_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = gen9_dc_off_power_well_enable,
+ .disable = gen9_dc_off_power_well_disable,
+ .is_enabled = gen9_dc_off_power_well_enabled,
+};
+
+const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = bxt_dpio_cmn_power_well_enable,
+ .disable = bxt_dpio_cmn_power_well_disable,
+ .is_enabled = bxt_dpio_cmn_power_well_enabled,
+};
+
+const struct i915_power_well_ops vlv_display_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = vlv_display_power_well_enable,
+ .disable = vlv_display_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = vlv_dpio_cmn_power_well_enable,
+ .disable = vlv_dpio_cmn_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+const struct i915_power_well_ops vlv_dpio_power_well_ops = {
+ .sync_hw = i9xx_power_well_sync_hw_noop,
+ .enable = vlv_power_well_enable,
+ .disable = vlv_power_well_disable,
+ .is_enabled = vlv_power_well_enabled,
+};
+
+static const struct i915_power_well_regs icl_aux_power_well_regs = {
+ .bios = ICL_PWR_WELL_CTL_AUX1,
+ .driver = ICL_PWR_WELL_CTL_AUX2,
+ .debug = ICL_PWR_WELL_CTL_AUX4,
+};
+
+const struct i915_power_well_ops icl_aux_power_well_ops = {
+ .regs = &icl_aux_power_well_regs,
+ .sync_hw = hsw_power_well_sync_hw,
+ .enable = icl_aux_power_well_enable,
+ .disable = icl_aux_power_well_disable,
+ .is_enabled = hsw_power_well_enabled,
+};
+
+static const struct i915_power_well_regs icl_ddi_power_well_regs = {
+ .bios = ICL_PWR_WELL_CTL_DDI1,
+ .driver = ICL_PWR_WELL_CTL_DDI2,
+ .debug = ICL_PWR_WELL_CTL_DDI4,
+};
+
+const struct i915_power_well_ops icl_ddi_power_well_ops = {
+ .regs = &icl_ddi_power_well_regs,
+ .sync_hw = hsw_power_well_sync_hw,
+ .enable = hsw_power_well_enable,
+ .disable = hsw_power_well_disable,
+ .is_enabled = hsw_power_well_enabled,
+};
+
+const struct i915_power_well_ops tgl_tc_cold_off_ops = {
+ .sync_hw = tgl_tc_cold_off_power_well_sync_hw,
+ .enable = tgl_tc_cold_off_power_well_enable,
+ .disable = tgl_tc_cold_off_power_well_disable,
+ .is_enabled = tgl_tc_cold_off_power_well_is_enabled,
+};
diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.h b/drivers/gpu/drm/i915/display/intel_display_power_well.h
index 9a3756fdcf7fc..2c0e53fb976c4 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power_well.h
+++ b/drivers/gpu/drm/i915/display/intel_display_power_well.h
@@ -36,41 +36,6 @@ enum i915_power_well_id {
TGL_DISP_PW_TC_COLD_OFF,
};
-struct i915_power_well_regs {
- i915_reg_t bios;
- i915_reg_t driver;
- i915_reg_t kvmr;
- i915_reg_t debug;
-};
-
-struct i915_power_well_ops {
- const struct i915_power_well_regs *regs;
- /*
- * Synchronize the well's hw state to match the current sw state, for
- * example enable/disable it based on the current refcount. Called
- * during driver init and resume time, possibly after first calling
- * the enable/disable handlers.
- */
- void (*sync_hw)(struct drm_i915_private *i915,
- struct i915_power_well *power_well);
- /*
- * Enable the well and resources that depend on it (for example
- * interrupts located on the well). Called after the 0->1 refcount
- * transition.
- */
- void (*enable)(struct drm_i915_private *i915,
- struct i915_power_well *power_well);
- /*
- * Disable the well and resources that depend on it. Called after
- * the 1->0 refcount transition.
- */
- void (*disable)(struct drm_i915_private *i915,
- struct i915_power_well *power_well);
- /* Returns the hw enabled state. */
- bool (*is_enabled)(struct drm_i915_private *i915,
- struct i915_power_well *power_well);
-};
-
struct i915_power_well_desc {
const char *name;
bool always_on;
@@ -150,4 +115,26 @@ const char *intel_power_well_name(struct i915_power_well *power_well);
u64 intel_power_well_domains(struct i915_power_well *power_well);
int intel_power_well_refcount(struct i915_power_well *power_well);
+void gen9_enable_dc5(struct drm_i915_private *dev_priv);
+void skl_enable_dc6(struct drm_i915_private *dev_priv);
+void gen9_sanitize_dc_state(struct drm_i915_private *dev_priv);
+void gen9_set_dc_state(struct drm_i915_private *dev_priv, u32 state);
+void gen9_disable_dc_states(struct drm_i915_private *dev_priv);
+void bxt_enable_dc9(struct drm_i915_private *dev_priv);
+void bxt_disable_dc9(struct drm_i915_private *dev_priv);
+
+extern const struct i915_power_well_ops i9xx_always_on_power_well_ops;
+extern const struct i915_power_well_ops chv_pipe_power_well_ops;
+extern const struct i915_power_well_ops chv_dpio_cmn_power_well_ops;
+extern const struct i915_power_well_ops i830_pipes_power_well_ops;
+extern const struct i915_power_well_ops hsw_power_well_ops;
+extern const struct i915_power_well_ops gen9_dc_off_power_well_ops;
+extern const struct i915_power_well_ops bxt_dpio_cmn_power_well_ops;
+extern const struct i915_power_well_ops vlv_display_power_well_ops;
+extern const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops;
+extern const struct i915_power_well_ops vlv_dpio_power_well_ops;
+extern const struct i915_power_well_ops icl_aux_power_well_ops;
+extern const struct i915_power_well_ops icl_ddi_power_well_ops;
+extern const struct i915_power_well_ops tgl_tc_cold_off_ops;
+
#endif
--
2.27.0
More information about the Intel-gfx
mailing list