[Intel-gfx] [PATCH 2/6] drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV

[Lisovskiy, Stanislav]

On Mon, Feb 14, 2022 at 10:26:39PM +0200, Ville Syrjälä wrote:
> On Mon, Feb 14, 2022 at 07:03:05PM +0200, Lisovskiy, Stanislav wrote:
> > On Mon, Feb 14, 2022 at 12:24:57PM +0200, Ville Syrjälä wrote:
> > > On Mon, Feb 14, 2022 at 12:05:36PM +0200, Lisovskiy, Stanislav wrote:
> > > > On Mon, Feb 14, 2022 at 11:18:07AM +0200, Ville Syrjala wrote:
> > > > > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > > > 
> > > > > If the only thing that is changing is SAGV vs. no SAGV but
> > > > > the number of active planes and the total data rates end up
> > > > > unchanged we currently bail out of intel_bw_atomic_check()
> > > > > early and forget to actually compute the new WGV point
> > > > > mask and thus won't actually enable/disable SAGV as requested.
> > > > > This ends up poorly if we end up running with SAGV enabled
> > > > > when we shouldn't. Usually ends up in underruns.
> > > > > To fix this let's go through the QGV point mask computation
> > > > > if anyone else already added the bw state for us.
> > > > 
> > > > Haven't been looking this in a while. Despite we have been
> > > > looking like few revisions together still some bugs :(
> > > > 
> > > > I thought SAGV vs No SAGV can't change if active planes 
> > > > or data rate didn't change? Because it means we probably
> > > > still have same ddb allocations, which means SAGV state
> > > > will just stay the same.
> > > 
> > > SAGV can change due to watermarks/ddb allocations. The easiest
> > > way to trip this up is to try to use the async flip wm0/ddb 
> > > optimization. That immediately forgets to turn off SAGV and
> > > we get underruns, whcih is how I noticed this. And I don't
> > > immediately see any easy proof that this couldn't also happen
> > > due to some other plane changes.
> > 
> > Thats the way it was initially implemented even before SAGV was added.
> 
> Yeah, it wasn't a problem as long as SAGV was not enabled.
> 
> > I think it can be dated back to the very first bw check was implemented.
> > 
> > commit c457d9cf256e942138a54a2e80349ee7fe20c391
> > Author: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Date:   Fri May 24 18:36:14 2019 +0300
> > 
> >     drm/i915: Make sure we have enough memory bandwidth on ICL
> > 
> > +int intel_bw_atomic_check(struct intel_atomic_state *state)
> > +{
> > +       struct drm_i915_private *dev_priv = to_i915(state->base.dev);
> > +       struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> > +       struct intel_bw_state *bw_state = NULL;
> > +       unsigned int data_rate, max_data_rate;
> > +       unsigned int num_active_planes;
> > +       struct intel_crtc *crtc;
> > +       int i;
> > +
> > +       /* FIXME earlier gens need some checks too */
> > +       if (INTEL_GEN(dev_priv) < 11)
> > +               return 0;
> > +
> > +       for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
> > +                                           new_crtc_state, i) {
> > +               unsigned int old_data_rate =
> > +                       intel_bw_crtc_data_rate(old_crtc_state);
> > +               unsigned int new_data_rate =
> > +                       intel_bw_crtc_data_rate(new_crtc_state);
> > +               unsigned int old_active_planes =
> > +                       intel_bw_crtc_num_active_planes(old_crtc_state);
> > +               unsigned int new_active_planes =
> > +                       intel_bw_crtc_num_active_planes(new_crtc_state);
> > +
> > +               /*
> > +                * Avoid locking the bw state when
> > +                * nothing significant has changed.
> > +                */
> > +               if (old_data_rate == new_data_rate &&
> > +                   old_active_planes == new_active_planes)
> > +                       continue;
> > +
> > +               bw_state  = intel_atomic_get_bw_state(state);
> > +               if (IS_ERR(bw_state))
> > +                       return PTR_ERR(bw_state);
> > 
> > However, what can cause watermarks/ddb to change, besides plane state change
> > and/or active planes change? We change watermarks, when we change ddb allocations
> > and we change ddb allocations when active planes had changed and/or data rate
> > had changed.
> 
> The bw code only cares about the aggregate numbers from all the planes.
> The planes could still change in some funny way where eg. some plane
> frees up some bandwidth, but the other planes gobble up the exact same
> amount and thus the aggregate numbers the bw atomic check cares about
> do not change but the watermarks/ddb do.
> 
> And as mentiioned, the async flip wm0/ddb optimization makes this trivial
> to trip up since it will want to disable SAGV as there is not enough ddb
> for the SAGV watermark. And async flip specifically isn't even allowed
> to change anything that would affect the bandwidth utilization, and neither
> is it allowed to enable/disable planes.

I think the whole idea of setting ddb to minimum in case of async flip optimization
was purely our idea - BSpec/HSD only mentions forbidding wm levels > 0 in case of async
flip, however there is nothing about limiting ddb allocations.

Was a bit suspicious about that whole change, to be honest - and yep, now it seems to
cause some unexpected side effects.

Also we are now forcing the recalculation to be done always no matter what and using
new bw state for that in a bit counterintuitive way, which I don't like. 
Not even sure that will always work, as we are not guaranteed to get a non-NULL
new_bw_state object from calling intel_atomic_get_new_bw_state, for that purpose we
typically call intel_atomic_get_bw_state, which is supposed to do that and its called only
here and in cause of CDCLK recalculation, which is called in intel_cdclk_atomic_check and
done right after this one.

So if we haven't called intel_atomic_get_bw_state beforehand, which we didn't because there are
2 places, where new bw state was supposed to be created to be usable by intel_atomic_get_new_bw_state
- I think, we will(or might) get a NULL here, because intel_atomic_get_bw_state hasn't been called yet.

Stan

> 
> -- 
> Ville Syrjälä
> Intel