[Intel-gfx] [PATCH 1/3] drm/i915/dg2: Enable 5th display

Shankar, Uma uma.shankar at intel.com
Wed Feb 16 08:02:31 UTC 2022



> -----Original Message-----
> From: C, Ramalingam <ramalingam.c at intel.com>
> Sent: Tuesday, February 15, 2022 11:22 AM
> To: intel-gfx <intel-gfx at lists.freedesktop.org>; dri-devel <dri-
> devel at lists.freedesktop.org>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>; Shankar, Uma
> <uma.shankar at intel.com>; Roper, Matthew D <matthew.d.roper at intel.com>;
> Dhanavanthri, Swathi <swathi.dhanavanthri at intel.com>; De Marchi, Lucas
> <lucas.demarchi at intel.com>; Souza, Jose <jose.souza at intel.com>; C, Ramalingam
> <ramalingam.c at intel.com>
> Subject: [PATCH 1/3] drm/i915/dg2: Enable 5th display
> 
> From: Matt Roper <matthew.d.roper at intel.com>
> 
> DG2 supports a 5th display output which the hardware refers to as "TC1,"
> even though it isn't a Type-C output.  This behaves similarly to the TC1 on past
> platforms with just a couple minor differences:
> 
>  * DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on
>    ICP/TGP/ADP.
>  * DG2 doesn't need the hpd inversion setting that we had to use on DG1
> 
> Cc: Swathi Dhanavanthri <swathi.dhanavanthri at intel.com>
> Cc: Lucas De Marchi <lucas.demarchi at intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_gmbus.c | 16 ++++++++++++++--
>  drivers/gpu/drm/i915/i915_irq.c            |  5 ++++-
>  drivers/gpu/drm/i915/i915_reg.h            |  1 +
>  3 files changed, 19 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c
> b/drivers/gpu/drm/i915/display/intel_gmbus.c
> index 6ce8c10fe975..2fad03250661 100644
> --- a/drivers/gpu/drm/i915/display/intel_gmbus.c
> +++ b/drivers/gpu/drm/i915/display/intel_gmbus.c
> @@ -98,11 +98,21 @@ static const struct gmbus_pin gmbus_pins_dg1[] = {
>  	[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
>  };
> 
> +static const struct gmbus_pin gmbus_pins_dg2[] = {
> +	[GMBUS_PIN_1_BXT] = { "dpa", GPIOB },
> +	[GMBUS_PIN_2_BXT] = { "dpb", GPIOC },
> +	[GMBUS_PIN_3_BXT] = { "dpc", GPIOD },
> +	[GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
> +	[GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ }, };
> +
>  /* pin is expected to be valid */
>  static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv,
>  					     unsigned int pin)
>  {
> -	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
> +	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG2)
> +		return &gmbus_pins_dg2[pin];
> +	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
>  		return &gmbus_pins_dg1[pin];
>  	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
>  		return &gmbus_pins_icp[pin];
> @@ -123,7 +133,9 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private
> *dev_priv,  {
>  	unsigned int size;
> 
> -	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
> +	if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG2)
> +		size = ARRAY_SIZE(gmbus_pins_dg2);
> +	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
>  		size = ARRAY_SIZE(gmbus_pins_dg1);
>  	else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
>  		size = ARRAY_SIZE(gmbus_pins_icp);
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index
> fdd568ba4a16..4d81063b128c 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -179,6 +179,7 @@ static const u32 hpd_sde_dg1[HPD_NUM_PINS] = {
>  	[HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_B),
>  	[HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_C),
>  	[HPD_PORT_D] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_D),
> +	[HPD_PORT_TC1] = SDE_TC_HOTPLUG_DG2(HPD_PORT_TC1),

Not sure if this applies to DG1, the 5th TC1 port is only for DG2.  Should we not have a separate
DG2 struct. Can you please clarify to help understand.

Regards,
Uma Shankar

>  };
> 
>  static void intel_hpd_init_pins(struct drm_i915_private *dev_priv) @@ -4424,7
> +4425,9 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
>  		if (I915_HAS_HOTPLUG(dev_priv))
>  			dev_priv->hotplug_funcs = &i915_hpd_funcs;
>  	} else {
> -		if (HAS_PCH_DG1(dev_priv))
> +		if (HAS_PCH_DG2(dev_priv))
> +			dev_priv->hotplug_funcs = &icp_hpd_funcs;
> +		else if (HAS_PCH_DG1(dev_priv))
>  			dev_priv->hotplug_funcs = &dg1_hpd_funcs;
>  		else if (DISPLAY_VER(dev_priv) >= 11)
>  			dev_priv->hotplug_funcs = &gen11_hpd_funcs; diff --git
> a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index
> 4ea1713e6b60..4d12abb2d7ff 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -6182,6 +6182,7 @@
>  /* south display engine interrupt: ICP/TGP */
>  #define SDE_GMBUS_ICP			(1 << 23)
>  #define SDE_TC_HOTPLUG_ICP(hpd_pin)	REG_BIT(24 +
> _HPD_PIN_TC(hpd_pin))
> +#define SDE_TC_HOTPLUG_DG2(hpd_pin)	REG_BIT(25 +
> _HPD_PIN_TC(hpd_pin)) /* sigh */
>  #define SDE_DDI_HOTPLUG_ICP(hpd_pin)	REG_BIT(16 +
> _HPD_PIN_DDI(hpd_pin))
>  #define SDE_DDI_HOTPLUG_MASK_ICP	(SDE_DDI_HOTPLUG_ICP(HPD_PORT_D) | \
>  					 SDE_DDI_HOTPLUG_ICP(HPD_PORT_C) | \
> --
> 2.20.1



More information about the Intel-gfx mailing list