[Intel-gfx] [PATCH 04/12] drm/i915: Extract intel_splitter_adjust_timings()

[Jani Nikula]

On Tue, 15 Feb 2022, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Let's not replicate the same piece of code to expand
> the MSO segment timings to full width in many places.
> Pull it into a helper

Did I duplicate that? Yuck.

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 54 ++++++++++----------
>  1 file changed, 26 insertions(+), 28 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 5da8db3dda8f..70017526fa81 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -2724,6 +2724,30 @@ static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
>  			ilk_pipe_pixel_rate(crtc_state);
>  }
>  
> +static void intel_splitter_adjust_timings(const struct intel_crtc_state *crtc_state,
> +					  struct drm_display_mode *mode)
> +{
> +	int overlap = crtc_state->splitter.pixel_overlap;
> +	int n = crtc_state->splitter.link_count;
> +
> +	if (!crtc_state->splitter.enable)
> +		return;
> +
> +	/*
> +	 * eDP MSO uses segment timings from EDID for transcoder
> +	 * timings, but full mode for everything else.
> +	 *
> +	 * h_full = (h_segment - pixel_overlap) * link_count
> +	 */
> +	mode->crtc_hdisplay = (mode->crtc_hdisplay - overlap) * n;
> +	mode->crtc_hblank_start = (mode->crtc_hblank_start - overlap) * n;
> +	mode->crtc_hblank_end = (mode->crtc_hblank_end - overlap) * n;
> +	mode->crtc_hsync_start = (mode->crtc_hsync_start - overlap) * n;
> +	mode->crtc_hsync_end = (mode->crtc_hsync_end - overlap) * n;
> +	mode->crtc_htotal = (mode->crtc_htotal - overlap) * n;
> +	mode->crtc_clock *= n;
> +}
> +
>  static void intel_crtc_readout_derived_state(struct intel_crtc_state *crtc_state)
>  {
>  	struct drm_display_mode *mode = &crtc_state->hw.mode;
> @@ -2747,22 +2771,7 @@ static void intel_crtc_readout_derived_state(struct intel_crtc_state *crtc_state
>  	}
>  
>  	if (crtc_state->splitter.enable) {
> -		int n = crtc_state->splitter.link_count;
> -		int overlap = crtc_state->splitter.pixel_overlap;
> -
> -		/*
> -		 * eDP MSO uses segment timings from EDID for transcoder
> -		 * timings, but full mode for everything else.
> -		 *
> -		 * h_full = (h_segment - pixel_overlap) * link_count
> -		 */
> -		pipe_mode->crtc_hdisplay = (pipe_mode->crtc_hdisplay - overlap) * n;
> -		pipe_mode->crtc_hblank_start = (pipe_mode->crtc_hblank_start - overlap) * n;
> -		pipe_mode->crtc_hblank_end = (pipe_mode->crtc_hblank_end - overlap) * n;
> -		pipe_mode->crtc_hsync_start = (pipe_mode->crtc_hsync_start - overlap) * n;
> -		pipe_mode->crtc_hsync_end = (pipe_mode->crtc_hsync_end - overlap) * n;
> -		pipe_mode->crtc_htotal = (pipe_mode->crtc_htotal - overlap) * n;
> -		pipe_mode->crtc_clock *= n;
> +		intel_splitter_adjust_timings(crtc_state, pipe_mode);
>  
>  		intel_mode_from_crtc_timings(pipe_mode, pipe_mode);
>  		intel_mode_from_crtc_timings(adjusted_mode, pipe_mode);
> @@ -2807,18 +2816,7 @@ static int intel_crtc_compute_config(struct intel_crtc *crtc,
>  		crtc_state->pipe_src_w /= 2;
>  	}
>  
> -	if (crtc_state->splitter.enable) {
> -		int n = crtc_state->splitter.link_count;
> -		int overlap = crtc_state->splitter.pixel_overlap;
> -
> -		pipe_mode->crtc_hdisplay = (pipe_mode->crtc_hdisplay - overlap) * n;
> -		pipe_mode->crtc_hblank_start = (pipe_mode->crtc_hblank_start - overlap) * n;
> -		pipe_mode->crtc_hblank_end = (pipe_mode->crtc_hblank_end - overlap) * n;
> -		pipe_mode->crtc_hsync_start = (pipe_mode->crtc_hsync_start - overlap) * n;
> -		pipe_mode->crtc_hsync_end = (pipe_mode->crtc_hsync_end - overlap) * n;
> -		pipe_mode->crtc_htotal = (pipe_mode->crtc_htotal - overlap) * n;
> -		pipe_mode->crtc_clock *= n;
> -	}
> +	intel_splitter_adjust_timings(crtc_state, pipe_mode);
>  
>  	intel_mode_from_crtc_timings(pipe_mode, pipe_mode);

-- 
Jani Nikula, Intel Open Source Graphics Center