[Intel-gfx] [PATCH v3 07/11] drm/i915/gt: Move engine registers to their own header
Lucas De Marchi
lucas.demarchi at intel.com
Tue Jan 11 16:29:54 UTC 2022
On Mon, Jan 10, 2022 at 09:15:56PM -0800, Matt Roper wrote:
>Let's start breaking up and cleaning up the massive i915_reg.h file.
>We'll start by moving all registers that are defined in relation to an
>engine base to their own header.
maybe reword this a little bit since now this isn't the start of
this series anymore?
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index b7e03b6e886d..b504d67c2752 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -272,14 +272,6 @@
> #define GEN12_SFC_DONE(n) _MMIO(0x1cc000 + (n) * 0x1000)
> #define GEN12_SFC_DONE_MAX 4
>
>-#define RING_PP_DIR_BASE(base) _MMIO((base) + 0x228)
>-#define RING_PP_DIR_BASE_READ(base) _MMIO((base) + 0x518)
>-#define RING_PP_DIR_DCLV(base) _MMIO((base) + 0x220)
>-#define PP_DIR_DCLV_2G 0xffffffff
>-
>-#define GEN8_RING_PDP_UDW(base, n) _MMIO((base) + 0x270 + (n) * 8 + 4)
>-#define GEN8_RING_PDP_LDW(base, n) _MMIO((base) + 0x270 + (n) * 8)
>-
> #define GEN8_R_PWR_CLK_STATE _MMIO(0x20C8)
> #define GEN8_RPCS_ENABLE (1 << 31)
> #define GEN8_RPCS_S_CNT_ENABLE (1 << 18)
>@@ -2206,71 +2198,8 @@
> #define XEHP_VEBOX3_RING_BASE 0x1e8000
> #define XEHP_VEBOX4_RING_BASE 0x1f8000
> #define BLT_RING_BASE 0x22000
I know from the commit message this is not all, but since we are moving
the RING_TAIL() and friends that take the base as parameter, I don't
understand why we woul leave the bases behind in the old header.
Up to you if squashing the additional move here or following up with
more patches
Reviewed-by: Lucas De Marchi <lucas.demarchi at intel.com>
Lucas De Marchi
>-#define RING_TAIL(base) _MMIO((base) + 0x30)
>-#define RING_HEAD(base) _MMIO((base) + 0x34)
>-#define RING_START(base) _MMIO((base) + 0x38)
>-#define RING_CTL(base) _MMIO((base) + 0x3c)
>-#define RING_CTL_SIZE(size) ((size) - PAGE_SIZE) /* in bytes -> pages */
>-#define RING_SYNC_0(base) _MMIO((base) + 0x40)
>-#define RING_SYNC_1(base) _MMIO((base) + 0x44)
>-#define RING_SYNC_2(base) _MMIO((base) + 0x48)
>-#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
>-#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
>-#define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE))
>-#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
>-#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
>-#define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE))
>-#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
>-#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
>-#define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE))
>-#define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE))
>-#define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE))
>-#define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE))
>-#define GEN6_NOSYNC INVALID_MMIO_REG
>-#define RING_PSMI_CTL(base) _MMIO((base) + 0x50)
>-#define GEN8_RC_SEMA_IDLE_MSG_DISABLE REG_BIT(12)
>-#define GEN8_FF_DOP_CLOCK_GATE_DISABLE REG_BIT(10)
>-#define GEN12_WAIT_FOR_EVENT_POWER_DOWN_DISABLE REG_BIT(7)
>-#define GEN6_BSD_GO_INDICATOR REG_BIT(4)
>-#define GEN6_BSD_SLEEP_INDICATOR REG_BIT(3)
>-#define GEN6_BSD_SLEEP_FLUSH_DISABLE REG_BIT(2)
>-#define GEN6_PSMI_SLEEP_MSG_DISABLE REG_BIT(0)
>-#define RING_MAX_IDLE(base) _MMIO((base) + 0x54)
>-#define RING_HWS_PGA(base) _MMIO((base) + 0x80)
>-#define RING_ID(base) _MMIO((base) + 0x8c)
>-#define RING_HWS_PGA_GEN6(base) _MMIO((base) + 0x2080)
More information about the Intel-gfx
mailing list