[Intel-gfx] [PATCH 3/4] drm/i915: Use wm0 only during async flips for DG2
Lisovskiy, Stanislav
stanislav.lisovskiy at intel.com
Mon Jan 24 09:13:25 UTC 2022
On Mon, Jan 24, 2022 at 11:11:14AM +0200, Ville Syrjälä wrote:
> On Mon, Jan 24, 2022 at 11:06:52AM +0200, Stanislav Lisovskiy wrote:
> > This optimization allows to achieve higher perfomance
> > during async flips.
> > For the first async flip we have to still temporarily
> > switch to sync flip, in order to reprogram plane
> > watermarks, so this requires taking into account
> > old plane state's do_async_flip flag.
> >
> > v2: - Removed redundant new_plane_state->do_async_flip
> > check from needs_async_flip_wm_override condition
> > (Ville Syrjälä)
> > - Extract dg2_async_flip_optimization to separate
> > function(Ville Syrjälä)
> > - Check for plane->async_flip instead of plane_id
> > (Ville Syrjälä)
> >
> > v3: - Rename "needs_async_flip_wm_override" to
> > "intel_plane_do_async_flip" and move all the required
> > checks there (Ville Syrjälä)
> > - Rename "dg2_async_flip_optimization" to
> > "use_minimal_wm0_only" (Ville Syrjälä)
> >
> > v4: - Swap new/old_crtc_state in intel_plane_do_async_flip
> > argument list(Ville Syrjälä)
> > - Use plane->base.dev to grab i915 pointer in
> > intel_plane_do_async_flip(Ville Syrjälä)
> > - Remove const modifier from plane parameter in
> > use_minimal_wm0_only(Ville Syrjälä)
> >
> > Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 24 +++++++++++++++++++-
> > drivers/gpu/drm/i915/intel_pm.c | 13 ++++++++++-
> > 2 files changed, 35 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index a65bae1f0c35..d4ba6c2910fc 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -4910,6 +4910,28 @@ static bool needs_scaling(const struct intel_plane_state *state)
> > return (src_w != dst_w || src_h != dst_h);
> > }
> >
> > +static bool intel_plane_do_async_flip(struct intel_plane *plane,
> > + const struct intel_crtc_state *old_crtc_state,
> > + const struct intel_crtc_state *new_crtc_state)
> > +{
> > + struct drm_i915_private *i915 = to_i915(plane->base.dev);
> > +
> > + if (!plane->async_flip)
> > + return false;
> > +
> > + if (!new_crtc_state->uapi.async_flip)
> > + return false;
> > +
> > + /*
> > + * In platforms after DISPLAY13, we might need to override
> > + * first async flip in order to change watermark levels
> > + * as part of optimization.
> > + * So for those, we are checking if this is a first async flip.
> > + * For platforms earlier than DISPLAY13 we always do async flip.
> > + */
> > + return DISPLAY_VER(i915) < 13 || old_crtc_state->uapi.async_flip;
> > +}
> > +
> > int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_state,
> > struct intel_crtc_state *new_crtc_state,
> > const struct intel_plane_state *old_plane_state,
> > @@ -5029,7 +5051,7 @@ int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_stat
> > needs_scaling(new_plane_state))))
> > new_crtc_state->disable_lp_wm = true;
> >
> > - if (new_crtc_state->uapi.async_flip && plane->async_flip)
> > + if (intel_plane_do_async_flip(plane, new_crtc_state, old_crtc_state))
>
> need to swap the new vs. old here too.
Damn right, thanks for spotting. Stupid mistake..
Stan
>
> > new_plane_state->do_async_flip = true;
> >
> > return 0;
> > diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> > index 06707d2b5fc5..8269f1e9c784 100644
> > --- a/drivers/gpu/drm/i915/intel_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_pm.c
> > @@ -5497,6 +5497,16 @@ static int skl_wm_max_lines(struct drm_i915_private *dev_priv)
> > return 31;
> > }
> >
> > +static bool use_minimal_wm0_only(const struct intel_crtc_state *crtc_state,
> > + struct intel_plane *plane)
> > +{
> > + struct drm_i915_private *i915 = to_i915(plane->base.dev);
> > +
> > + return DISPLAY_VER(i915) >= 13 &&
> > + crtc_state->uapi.async_flip &&
> > + plane->async_flip;
> > +}
> > +
> > static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
> > struct intel_plane *plane,
> > int level,
> > @@ -5510,7 +5520,8 @@ static void skl_compute_plane_wm(const struct intel_crtc_state *crtc_state,
> > uint_fixed_16_16_t selected_result;
> > u32 blocks, lines, min_ddb_alloc = 0;
> >
> > - if (latency == 0) {
> > + if (latency == 0 ||
> > + (use_minimal_wm0_only(crtc_state, plane) && level > 0)) {
> > /* reject it */
> > result->min_ddb_alloc = U16_MAX;
> > return;
> > --
> > 2.24.1.485.gad05a3d8e5
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list