[Intel-gfx] [PATCH v6] drm/i915/dsi: add payload receiving code

Jani Nikula jani.nikula at linux.intel.com
Fri Jul 1 10:48:00 UTC 2022


On Wed, 22 Jun 2022, William Tseng <william.tseng at intel.com> wrote:
> To support Host to read data from Peripheral after
> a DCS read command is sent over DSI.

Please find a couple of comments inline below. Basically with them fixed
this is

Acked-by: Jani Nikula <jani.nikula at intel.com>

I'm afraid I just don't have the time for further detailed review right
now. I do note that this has no regression potential for the existing
DSI write paths, so (apart from the potential buffer overflow I note
below) this should be a pretty safe change, as long as it's tested to
work.


BR,
Jani.


>
> v1: initial version.
> v2:
> - adding error message when failing to place BTA.
> - returning byte number instead of 0 for the read
> function dsi_read_pkt_payld().
> v3: fixing coding style warning.
> v4:
> - correcting the data type of returning data for
> the read function dsi_read_pkt_payld().
> v5: adding change history as part of commit messages.
> v6: according to the review comments from Jani,
> - drop the commented out variable "hdr_data".
> - use int insteaf of u8 as the data type of the loop
> variable i.
> - use intel_de_rmw() for read-modify-write.
> - add new function place_bta_request() to keep
> payload receive function clean.
> - explicitly clear the READ_UNLOADS_DW bit of
> DSI_CMD_RXCTL before reading receive payload.
> - use two loops to copy received data.
> - remove the unrelated change from this patch,
> which is made to gen11_dsi_setup_timeouts().
> - drop the comment in gen11_dsi_host_transfer().
> - change the condition to call the payload
> receive function in gen11_dsi_host_transfer().
>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Vandita Kulkarni <vandita.kulkarni at intel.com>
> Cc: Lee Shawn C <shawn.c.lee at intel.com>
> Signed-off-by: William Tseng <william.tseng at intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c      | 76 ++++++++++++++++++++-
>  drivers/gpu/drm/i915/display/icl_dsi_regs.h | 13 ++++
>  2 files changed, 86 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 19bf717fd4cb..edf20016af91 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -201,6 +201,75 @@ static int dsi_send_pkt_hdr(struct intel_dsi_host *host,
>  	return 0;
>  }
>  
> +static bool place_bta_request(struct intel_dsi_host *host)
> +{
> +	struct intel_dsi *intel_dsi = host->intel_dsi;
> +	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
> +	enum transcoder dsi_trans = dsi_port_to_transcoder(host->port);
> +
> +	/* step2a(i): specify Turn-Around timeout */
> +	intel_de_rmw(dev_priv, DSI_TA_TO(dsi_trans), TA_TIMEOUT_VALUE_MASK,
> +		     TA_TIMEOUT_VALUE(intel_dsi->turn_arnd_val));
> +
> +	 /* step2a(ii): specify maximum allowed time */
> +	intel_de_rmw(dev_priv, DSI_LPRX_HOST_TO(dsi_trans), ~LPRX_TIMEOUT_VALUE_MASK,
> +		     LPRX_TIMEOUT_VALUE(intel_dsi->lp_rx_timeout));
> +
> +	/* check if header credit available */
> +	if (!wait_for_header_credits(dev_priv, dsi_trans, 1)) {
> +		drm_err(&dev_priv->drm, "not ready to recive payload\n");
> +		return false;
> +	}
> +
> +	/* place BTA request */
> +	intel_de_rmw(dev_priv, DSI_LP_MSG(dsi_trans), LINK_BTA, LINK_BTA);
> +
> +	return true;
> +}
> +
> +static int dsi_read_pkt_payld(struct intel_dsi_host *host,
> +			      u8 *rx_buf, size_t rx_len)
> +{
> +	struct intel_dsi *intel_dsi = host->intel_dsi;
> +	struct drm_i915_private *dev_priv = to_i915(intel_dsi->base.base.dev);
> +	enum transcoder dsi_trans = dsi_port_to_transcoder(host->port);
> +	u32 tmp, payld_data;
> +	u32 payld_dw;
> +	int i, j;
> +
> +	if (rx_len <= 0)
> +		return 0;
> +
> +	/* do not unload receive queue */
> +	tmp = intel_de_read(dev_priv, DSI_CMD_RXCTL(dsi_trans));
> +	tmp &= ~READ_UNLOADS_DW;
> +	intel_de_write(dev_priv, DSI_CMD_RXCTL(dsi_trans), tmp);
> +
> +	/* step2: place a BTA request */
> +	if (!place_bta_request(host))
> +		return -EBUSY;
> +
> +	/* step4a: wait and read payload */
> +	if (wait_for_us(((intel_de_read(dev_priv, DSI_CMD_RXCTL(dsi_trans)) &
> +		NUMBER_RX_PLOAD_DW_MASK) >> NUMBER_RX_PLOAD_DW_SHIFT) > 0, 100000)) {
> +		drm_err(&dev_priv->drm, "DSI fails to receive payload\n");
> +		return -EBUSY;
> +	}
> +
> +	tmp = intel_de_read(dev_priv, DSI_CMD_RXCTL(dsi_trans));
> +	payld_dw = (tmp & NUMBER_RX_PLOAD_DW_MASK) >> NUMBER_RX_PLOAD_DW_SHIFT;
> +
> +	for (i = 0; i < payld_dw; i++) {
> +
> +		payld_data = intel_de_read(dev_priv, DSI_CMD_RXPYLD(dsi_trans));
> +
> +		for (j = 0; j < min_t(u32, rx_len - (i * 4), 4); j++)
> +			*(rx_buf + (i * 4 + j)) = (payld_data >> 8 * j) & 0xff;

Mmh, no matter what the hardware returns, you can't overflow rx_len in
rx_buf.

> +	}
> +
> +	return ((i - 1) * 4 + j);
> +}
> +
>  void icl_dsi_frame_update(struct intel_crtc_state *crtc_state)
>  {
>  	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> @@ -1837,9 +1906,10 @@ static ssize_t gen11_dsi_host_transfer(struct mipi_dsi_host *host,
>  	if (ret < 0)
>  		return ret;
>  
> -	//TODO: add payload receive code if needed
> -
> -	ret = sizeof(dsi_pkt.header) + dsi_pkt.payload_length;
> +	if (msg->rx_buf)

Matter of taste, I'd check for msg->rx_len here, and the return an error
from dsi_read_pkt_payld() if !msg->rx_buf.

> +		ret = dsi_read_pkt_payld(intel_dsi_host, msg->rx_buf, msg->rx_len);
> +	else
> +		ret = sizeof(dsi_pkt.header) + dsi_pkt.payload_length;
>  
>  	return ret;
>  }
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi_regs.h b/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> index f78f28b8dd94..a77a49b42d60 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> +++ b/drivers/gpu/drm/i915/display/icl_dsi_regs.h
> @@ -251,6 +251,18 @@
>  #define  NUMBER_RX_PLOAD_DW_MASK	(0xff << 0)
>  #define  NUMBER_RX_PLOAD_DW_SHIFT	0
>  
> +#define _DSI_CMD_RXHDR_0		0x6b0e0
> +#define _DSI_CMD_RXHDR_1		0x6b8e0
> +#define DSI_CMD_RXHDR(tc)		_MMIO_DSI(tc,	\
> +						  _DSI_CMD_RXHDR_0,\
> +						  _DSI_CMD_RXHDR_1)
> +
> +#define _DSI_CMD_RXPYLD_0		0x6b0e4
> +#define _DSI_CMD_RXPYLD_1		0x6b8e4
> +#define DSI_CMD_RXPYLD(tc)		_MMIO_DSI(tc,	\
> +						  _DSI_CMD_RXPYLD_0,\
> +						  _DSI_CMD_RXPYLD_1)
> +
>  #define _DSI_CMD_TXCTL_0		0x6b0d0
>  #define _DSI_CMD_TXCTL_1		0x6b8d0
>  #define DSI_CMD_TXCTL(tc)		_MMIO_DSI(tc,	\
> @@ -294,6 +306,7 @@
>  #define  LPTX_IN_PROGRESS		(1 << 17)
>  #define  LINK_IN_ULPS			(1 << 16)
>  #define  LINK_ULPS_TYPE_LP11		(1 << 8)
> +#define  LINK_BTA			(1 << 1)
>  #define  LINK_ENTER_ULPS		(1 << 0)
>  
>  /* DSI timeout registers */

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the Intel-gfx mailing list