[Intel-gfx] [PATCH v3 19/41] doc-dyndbg: edit dynamic-debug-howto for brevity, audience
Jim Cromie
jim.cromie at gmail.com
Mon Jul 18 06:36:03 UTC 2022
Rework/modernize docs:
- use /proc/dynamic_debug/control in examples
its *always* there (when dyndbg is config'd), even when <debugfs> is not.
drop <debugfs> talk, its a distraction here.
- read before write. Viewing before Controlling.
control file as Catalog.
- focus on use by a system administrator
add an alias to make examples more readable
drop grep-101 lessons, admins know this.
- use init/main.c as 1st example, thread it thru doc where useful.
everybodys kernel boots, runs these.
- add *prdbg* api section
to the bottom of the file, its for developers more than admins.
move list of api functions there.
- simplify - drop extra words, phrases, sentences.
- add "decorator" flags line to unify "prefix", trim fmlt descriptions
CC: linux-doc at vger.kernel.org
Signed-off-by: Jim Cromie <jim.cromie at gmail.com>
---
.../admin-guide/dynamic-debug-howto.rst | 238 +++++++++---------
1 file changed, 120 insertions(+), 118 deletions(-)
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index d8954ab05c7b..cdf1da69e43c 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -5,30 +5,19 @@ Dynamic debug
Introduction
============
-This document describes how to use the dynamic debug (dyndbg) feature.
+Dynamic debug allows you to dynamically enable/disable kernel
+debug-print code to obtain additional kernel information.
-Dynamic debug is designed to allow you to dynamically enable/disable
-kernel code to obtain additional kernel information. Currently, if
-``CONFIG_DYNAMIC_DEBUG`` is set, then all ``pr_debug()``/``dev_dbg()`` and
-``print_hex_dump_debug()``/``print_hex_dump_bytes()`` calls can be dynamically
-enabled per-callsite.
+If ``/proc/dynamic_debug/control`` exists, your kernel has dynamic debug.
+You'll need root access (sudo su) to use this.
-If you do not want to enable dynamic debug globally (i.e. in some embedded
-system), you may set ``CONFIG_DYNAMIC_DEBUG_CORE`` as basic support of dynamic
-debug and add ``ccflags := -DDYNAMIC_DEBUG_MODULE`` into the Makefile of any
-modules which you'd like to dynamically debug later.
-
-If ``CONFIG_DYNAMIC_DEBUG`` is not set, ``print_hex_dump_debug()`` is just
-shortcut for ``print_hex_dump(KERN_DEBUG)``.
-
-For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is
-its ``prefix_str`` argument, if it is constant string; or ``hexdump``
-in case ``prefix_str`` is built dynamically.
+Dynamic debug provides:
-Dynamic debug has even more useful features:
+ * a Catalog of all *prdbgs* in your kernel.
+ ``cat /proc/dynamic_debug/control`` to see them.
- * Simple query language allows turning on and off debugging
- statements by matching any combination of 0 or 1 of:
+ * a Simple query/command language to alter *prdbgs* by selecting on
+ any combination of 0 or 1 of:
- source filename
- function name
@@ -37,107 +26,88 @@ Dynamic debug has even more useful features:
- format string
- class name (as known/declared by each module)
- * Provides a debugfs control file: ``<debugfs>/dynamic_debug/control``
- which can be read to display the complete list of known debug
- statements, to help guide you
-
-Controlling dynamic debug Behaviour
-===================================
-
-The behaviour of ``pr_debug()``/``dev_dbg()`` are controlled via writing to a
-control file in the 'debugfs' filesystem. Thus, you must first mount
-the debugfs filesystem, in order to make use of this feature.
-Subsequently, we refer to the control file as:
-``<debugfs>/dynamic_debug/control``. For example, if you want to enable
-printing from source file ``svcsock.c``, line 1603 you simply do::
-
- nullarbor:~ # echo 'file svcsock.c line 1603 +p' >
- <debugfs>/dynamic_debug/control
-
-If you make a mistake with the syntax, the write will fail thus::
-
- nullarbor:~ # echo 'file svcsock.c wtf 1 +p' >
- <debugfs>/dynamic_debug/control
- -bash: echo: write error: Invalid argument
-
-Note, for systems without 'debugfs' enabled, the control file can be
-found in ``/proc/dynamic_debug/control``.
-
Viewing Dynamic Debug Behaviour
===============================
-You can view the currently configured behaviour of all the debug
-statements via::
+You can view the currently configured behaviour in the *prdbg* catalog:
- nullarbor:~ # cat <debugfs>/dynamic_debug/control
+ :#> head -n7 /proc/dynamic_debug/control
# filename:lineno [module]function flags format
- net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
- net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline : %d\012"
- net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth : %d\012"
- net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests : %d\012"
- ...
+ init/main.c:1179 [main]initcall_blacklist =_ "blacklisting initcall %s\012
+ init/main.c:1218 [main]initcall_blacklisted =_ "initcall %s blacklisted\012"
+ init/main.c:1424 [main]run_init_process =_ " with arguments:\012"
+ init/main.c:1426 [main]run_init_process =_ " %s\012"
+ init/main.c:1427 [main]run_init_process =_ " with environment:\012"
+ init/main.c:1429 [main]run_init_process =_ " %s\012"
+The 3rd space-delimited column shows the current flags, preceded by
+a ``=`` for easy use with grep/cut. ``=p`` shows enabled callsites.
-You can also apply standard Unix text manipulation filters to this
-data, e.g.::
+Controlling dynamic debug Behaviour
+===================================
- nullarbor:~ # grep -i rdma <debugfs>/dynamic_debug/control | wc -l
- 62
+The behaviour of *prdbg* sites are controlled by writing
+query/commands to the control file. Example::
- nullarbor:~ # grep -i tcp <debugfs>/dynamic_debug/control | wc -l
- 42
+ # grease the interface
+ :#> alias ddcmd='echo $* > /proc/dynamic_debug/control'
-The third column shows the currently enabled flags for each debug
-statement callsite (see below for definitions of the flags). The
-default value, with no flags enabled, is ``=_``. So you can view all
-the debug statement callsites with any non-default flags::
+ :#> ddcmd '-p; module main func run* +p'
+ :#> grep =p /proc/dynamic_debug/control
+ init/main.c:1424 [main]run_init_process =p " with arguments:\012"
+ init/main.c:1426 [main]run_init_process =p " %s\012"
+ init/main.c:1427 [main]run_init_process =p " with environment:\012"
+ init/main.c:1429 [main]run_init_process =p " %s\012"
- nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
- # filename:lineno [module]function flags format
- net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+Error messages go to console/syslog:
+
+ :#> ddcmd mode foo +p
+ dyndbg: unknown keyword "mode"
+ dyndbg: query parse failed
+ bash: echo: write error: Invalid argument
+
+If debugfs is also enabled and mounted, ``dynamic_debug/control`` is
+also under the mount-dir, typically ``/sys/kernel/debug/``.
Command Language Reference
==========================
-At the lexical level, a command comprises a sequence of words separated
+At the basic lexical level, a command is a sequence of words separated
by spaces or tabs. So these are all equivalent::
- nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
- <debugfs>/dynamic_debug/control
- nullarbor:~ # echo -n ' file svcsock.c line 1603 +p ' >
- <debugfs>/dynamic_debug/control
- nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd file svcsock.c line 1603 +p
+ :#> ddcmd "file svcsock.c line 1603 +p"
+ :#> ddcmd ' file svcsock.c line 1603 +p '
Command submissions are bounded by a write() system call.
Multiple commands can be written together, separated by ``;`` or ``\n``::
- ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \
- > <debugfs>/dynamic_debug/control
+ :#> ddcmd "func pnpacpi_get_resources +p; func pnp_assign_mem +p"
+ :#> ddcmd <<"EOC"
+ func pnpacpi_get_resources +p
+ func pnp_assign_mem +p
+ EOC
+ :#> cat query-batch-file > /proc/dynamic_debug/control
-If your query set is big, you can batch them too::
+You can also use wildcards in each query term. The match rule supports
+``*`` (matches zero or more characters) and ``?`` (matches exactly one
+character). For example, you can match all usb drivers::
- ~# cat query-batch-file > <debugfs>/dynamic_debug/control
+ :#> ddcmd file "drivers/usb/*" +p # "" to suppress shell expansion
-Another way is to use wildcards. The match rule supports ``*`` (matches
-zero or more characters) and ``?`` (matches exactly one character). For
-example, you can match all usb drivers::
-
- ~# echo "file drivers/usb/* +p" > <debugfs>/dynamic_debug/control
-
-At the syntactical level, a command comprises a sequence of match
-specifications, followed by a flags change specification::
+Syntactically, a command is pairs of keyword values, followed by a
+flags change or setting::
command ::= match-spec* flags-spec
-The match-spec's are used to choose a subset of the known pr_debug()
-callsites to which to apply the flags-spec. Think of them as a query
-with implicit ANDs between each pair. Note that an empty list of
-match-specs will select all debug statement callsites.
+The match-spec's select *prdbgs* from the catalog, upon which to apply
+the flags-spec, all constraints are ANDed together. An absent keyword
+is the same as keyword "*".
+
-A match specification comprises a keyword, which controls the
-attribute of the callsite to be compared, and a value to compare
-against. Possible keywords are:::
+A match specification is a keyword, which selects the attribute of
+the callsite to be compared, and a value to compare against. Possible
+keywords are:::
match-spec ::= 'func' string |
'file' string |
@@ -213,6 +183,7 @@ class
class DRM_UT_KMS # a DRM.debug category
class JUNK # silent non-match
+ // class TLD_* # NOTICE: no wildcard in class names
line
The given line number or range of line numbers is compared
@@ -239,17 +210,16 @@ of the characters::
The flags are::
p enables the pr_debug() callsite.
- f Include the function name in the printed message
- l Include line number in the printed message
- m Include module name in the printed message
- t Include thread ID in messages not generated from interrupt context
- _ No flags are set. (Or'd with others on input)
+ _ enables no flags.
-For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only ``p`` flag
-have meaning, other flags ignored.
+ Decorator flags add to the message-prefix, in order:
+ t Include thread ID, or <intr>
+ m Include module name
+ f Include the function name
+ l Include line number
-For display, the flags are preceded by ``=``
-(mnemonic: what the flags are currently equal to).
+For ``print_hex_dump_debug()`` and ``print_hex_dump_bytes()``, only
+the ``p`` flag has meaning, other flags are ignored.
Note the regexp ``^[-+=][flmpt_]+$`` matches a flags specification.
To clear all flags at once, use ``=_`` or ``-flmpt``.
@@ -324,7 +294,7 @@ For ``CONFIG_DYNAMIC_DEBUG`` kernels, any settings given at boot-time (or
enabled by ``-DDEBUG`` flag during compilation) can be disabled later via
the debugfs interface if the debug messages are no longer needed::
- echo "module module_name -p" > <debugfs>/dynamic_debug/control
+ echo "module module_name -p" > /proc/dynamic_debug/control
Examples
========
@@ -332,37 +302,31 @@ Examples
::
// enable the message at line 1603 of file svcsock.c
- nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd 'file svcsock.c line 1603 +p'
// enable all the messages in file svcsock.c
- nullarbor:~ # echo -n 'file svcsock.c +p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd 'file svcsock.c +p'
// enable all the messages in the NFS server module
- nullarbor:~ # echo -n 'module nfsd +p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd 'module nfsd +p'
// enable all 12 messages in the function svc_process()
- nullarbor:~ # echo -n 'func svc_process +p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd 'func svc_process +p'
// disable all 12 messages in the function svc_process()
- nullarbor:~ # echo -n 'func svc_process -p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd 'func svc_process -p'
// enable messages for NFS calls READ, READLINK, READDIR and READDIR+.
- nullarbor:~ # echo -n 'format "nfsd: READ" +p' >
- <debugfs>/dynamic_debug/control
+ :#> ddcmd 'format "nfsd: READ" +p'
// enable messages in files of which the paths include string "usb"
- nullarbor:~ # echo -n 'file *usb* +p' > <debugfs>/dynamic_debug/control
+ :#> ddcmd 'file *usb* +p' > /proc/dynamic_debug/control
// enable all messages
- nullarbor:~ # echo -n '+p' > <debugfs>/dynamic_debug/control
+ :#> ddcmd '+p' > /proc/dynamic_debug/control
// add module, function to all enabled messages
- nullarbor:~ # echo -n '+mf' > <debugfs>/dynamic_debug/control
+ :#> ddcmd '+mf' > /proc/dynamic_debug/control
// boot-args example, with newlines and comments for readability
Kernel command line: ...
@@ -375,3 +339,41 @@ Examples
dyndbg="file init/* +p #cmt ; func parse_one +p"
// enable pr_debugs in 2 functions in a module loaded later
pc87360.dyndbg="func pc87360_init_device +p; func pc87360_find +p"
+
+Kernel Configuration
+====================
+
+Dynamic Debug is enabled via kernel config items:
+
+ CONFIG_DYNAMIC_DEBUG=y # build catalog, enables CORE
+ CONFIG_DYNAMIC_DEBUG_CORE=y # enable mechanics only, skip catalog
+
+Fedora's distro-kernel has both, and has 7250 *prdbgs*. Each callsite
+record uses 56 bytes, so the impact on memory is non-trivial.
+
+If you do not want to enable dynamic debug globally (i.e. in some embedded
+system), you may set ``CONFIG_DYNAMIC_DEBUG_CORE`` as basic support of dynamic
+debug and add ``ccflags := -DDYNAMIC_DEBUG_MODULE`` into the Makefile of any
+modules which you'd like to dynamically debug later.
+
+
+Kernel *prdbg* API
+==================
+
+The following functions are cataloged and controllable when dynamic
+debug is enabled::
+
+ pr_debug()
+ dev_dbg()
+ print_hex_dump_debug()
+ print_hex_dump_bytes()
+
+Otherwise, they are off by default; ``ccflags += -DDEBUG`` or
+``#define DEBUG`` in a source file will enable them appropriately.
+
+If ``CONFIG_DYNAMIC_DEBUG`` is not set, ``print_hex_dump_debug()`` is
+just a shortcut for ``print_hex_dump(KERN_DEBUG)``.
+
+For ``print_hex_dump_debug()``/``print_hex_dump_bytes()``, format string is
+its ``prefix_str`` argument, if it is constant string; or ``hexdump``
+in case ``prefix_str`` is built dynamically.
--
2.36.1
More information about the Intel-gfx
mailing list