[Intel-gfx] [PATCH 05/23] drm/i915/mtl: Define engine context layouts

Radhakrishna Sripada radhakrishna.sripada at intel.com
Thu Jul 28 01:34:02 UTC 2022


From: Matt Roper <matthew.d.roper at intel.com>

The part of the media and blitter engine contexts that we care about for
setting up an initial state are the same on MTL as they were on on DG2
(and PVC), so we need to update the driver conditions to re-use the DG2
context table.

For render/compute engines, the part of the context images are nearly
the same, although the layout had a very slight change --- one POSH
register was removed and the placement of some LRI/noops adjusted
slightly to compensate.

Bspec: 46261, 46260, 45585
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
 drivers/gpu/drm/i915/gt/intel_lrc.c | 47 ++++++++++++++++++++++++++++-
 1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
index eec73c66406c..d3833cbaabcb 100644
--- a/drivers/gpu/drm/i915/gt/intel_lrc.c
+++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
@@ -606,6 +606,49 @@ static const u8 dg2_rcs_offsets[] = {
 	END
 };
 
+static const u8 mtl_rcs_offsets[] = {
+       NOP(1),
+       LRI(15, POSTED),
+       REG16(0x244),
+       REG(0x034),
+       REG(0x030),
+       REG(0x038),
+       REG(0x03c),
+       REG(0x168),
+       REG(0x140),
+       REG(0x110),
+       REG(0x1c0),
+       REG(0x1c4),
+       REG(0x1c8),
+       REG(0x180),
+       REG16(0x2b4),
+       REG(0x120),
+       REG(0x124),
+
+       NOP(1),
+       LRI(9, POSTED),
+       REG16(0x3a8),
+       REG16(0x28c),
+       REG16(0x288),
+       REG16(0x284),
+       REG16(0x280),
+       REG16(0x27c),
+       REG16(0x278),
+       REG16(0x274),
+       REG16(0x270),
+
+       NOP(2),
+       LRI(2, POSTED),
+       REG16(0x5a8),
+       REG16(0x5ac),
+
+       NOP(6),
+       LRI(1, 0),
+       REG(0x0c8),
+
+       END
+};
+
 #undef END
 #undef REG16
 #undef REG
@@ -624,7 +667,9 @@ static const u8 *reg_offsets(const struct intel_engine_cs *engine)
 		   !intel_engine_has_relative_mmio(engine));
 
 	if (engine->flags & I915_ENGINE_HAS_RCS_REG_STATE) {
-		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
+		if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 70))
+			return mtl_rcs_offsets;
+		else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 55))
 			return dg2_rcs_offsets;
 		else if (GRAPHICS_VER_FULL(engine->i915) >= IP_VER(12, 50))
 			return xehp_rcs_offsets;
-- 
2.25.1



More information about the Intel-gfx mailing list