[Intel-gfx] [PATCH v4 03/10] vfio/ap: Pass in physical address of ind to ap_aqic()

Nicolin Chen nicolinc at nvidia.com
Sat Jul 23 02:02:49 UTC 2022


The ap_aqic() is called by vfio_ap_irq_enable() where it passes in a
virt value that's casted from a physical address "h_nib". Inside the
ap_aqic(), it does virt_to_phys() again.

Since ap_aqic() needs a physical address, let's just pass in a pa of
ind directly. So change the "ind" to "pa_ind".

Reviewed-by: Harald Freudenberger <freude at linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg at nvidia.com>
Tested-by: Eric Farman <farman at linux.ibm.com>
Signed-off-by: Nicolin Chen <nicolinc at nvidia.com>
---
 arch/s390/include/asm/ap.h        | 6 +++---
 drivers/s390/crypto/ap_queue.c    | 2 +-
 drivers/s390/crypto/vfio_ap_ops.c | 7 ++++---
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/s390/include/asm/ap.h b/arch/s390/include/asm/ap.h
index b515cfa62bd9..f508f5025e38 100644
--- a/arch/s390/include/asm/ap.h
+++ b/arch/s390/include/asm/ap.h
@@ -227,13 +227,13 @@ struct ap_qirq_ctrl {
  * ap_aqic(): Control interruption for a specific AP.
  * @qid: The AP queue number
  * @qirqctrl: struct ap_qirq_ctrl (64 bit value)
- * @ind: The notification indicator byte
+ * @pa_ind: Physical address of the notification indicator byte
  *
  * Returns AP queue status.
  */
 static inline struct ap_queue_status ap_aqic(ap_qid_t qid,
 					     struct ap_qirq_ctrl qirqctrl,
-					     void *ind)
+					     phys_addr_t pa_ind)
 {
 	unsigned long reg0 = qid | (3UL << 24);  /* fc 3UL is AQIC */
 	union {
@@ -241,7 +241,7 @@ static inline struct ap_queue_status ap_aqic(ap_qid_t qid,
 		struct ap_qirq_ctrl qirqctrl;
 		struct ap_queue_status status;
 	} reg1;
-	unsigned long reg2 = virt_to_phys(ind);
+	unsigned long reg2 = pa_ind;
 
 	reg1.qirqctrl = qirqctrl;
 
diff --git a/drivers/s390/crypto/ap_queue.c b/drivers/s390/crypto/ap_queue.c
index c48b0db824e3..a32457b4cbb8 100644
--- a/drivers/s390/crypto/ap_queue.c
+++ b/drivers/s390/crypto/ap_queue.c
@@ -34,7 +34,7 @@ static int ap_queue_enable_irq(struct ap_queue *aq, void *ind)
 
 	qirqctrl.ir = 1;
 	qirqctrl.isc = AP_ISC;
-	status = ap_aqic(aq->qid, qirqctrl, ind);
+	status = ap_aqic(aq->qid, qirqctrl, virt_to_phys(ind));
 	switch (status.response_code) {
 	case AP_RESPONSE_NORMAL:
 	case AP_RESPONSE_OTHERWISE_CHANGED:
diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index bb1a1677c5c2..5781059d3ed2 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -154,7 +154,7 @@ static struct ap_queue_status vfio_ap_irq_disable(struct vfio_ap_queue *q)
 	int retries = 5;
 
 	do {
-		status = ap_aqic(q->apqn, aqic_gisa, NULL);
+		status = ap_aqic(q->apqn, aqic_gisa, 0);
 		switch (status.response_code) {
 		case AP_RESPONSE_OTHERWISE_CHANGED:
 		case AP_RESPONSE_NORMAL:
@@ -245,7 +245,8 @@ static struct ap_queue_status vfio_ap_irq_enable(struct vfio_ap_queue *q,
 	struct kvm_s390_gisa *gisa;
 	int nisc;
 	struct kvm *kvm;
-	unsigned long h_nib, g_pfn, h_pfn;
+	unsigned long g_pfn, h_pfn;
+	phys_addr_t h_nib;
 	int ret;
 
 	/* Verify that the notification indicator byte address is valid */
@@ -290,7 +291,7 @@ static struct ap_queue_status vfio_ap_irq_enable(struct vfio_ap_queue *q,
 	aqic_gisa.ir = 1;
 	aqic_gisa.gisa = (uint64_t)gisa >> 4;
 
-	status = ap_aqic(q->apqn, aqic_gisa, (void *)h_nib);
+	status = ap_aqic(q->apqn, aqic_gisa, h_nib);
 	switch (status.response_code) {
 	case AP_RESPONSE_NORMAL:
 		/* See if we did clear older IRQ configuration */
-- 
2.17.1



More information about the Intel-gfx mailing list