[Intel-gfx] [PATCH v2 7/9] drm/i915/rpm: Enable D3Cold VRAM SR Support

[Gupta, Anshuman]

> -----Original Message-----
> From: Jani Nikula <jani.nikula at linux.intel.com>
> Sent: Thursday, June 16, 2022 8:02 PM
> To: Gupta, Anshuman <anshuman.gupta at intel.com>; intel-
> gfx at lists.freedesktop.org; dri-devel at lists.freedesktop.org
> Cc: Wilson, Chris P <chris.p.wilson at intel.com>; Vivi, Rodrigo
> <rodrigo.vivi at intel.com>
> Subject: Re: [Intel-gfx] [PATCH v2 7/9] drm/i915/rpm: Enable D3Cold VRAM SR
> Support
> 
> On Thu, 16 Jun 2022, Anshuman Gupta <anshuman.gupta at intel.com> wrote:
> > Intel Client DGFX card supports D3Cold with two option.
> > D3Cold-off zero watt, D3Cold-VRAM Self Refresh.
> >
> > i915 requires to evict the lmem objects to smem in order to support
> > D3Cold-Off, which increases i915 the suspend/resume latency. Enabling
> > VRAM Self Refresh feature optimize the latency with additional power
> > cost which required to retain the lmem.
> >
> > Adding intel_runtime_idle (runtime_idle callback) to enable VRAM_SR,
> > it will be used for policy to choose between D3Cold-off vs
> > D3Cold-VRAM_SR.
> >
> > Since we have introduced i915 runtime_idle callback.
> > It need to be warranted that Runtime PM Core invokes runtime_idle
> > callback when runtime usages count becomes zero. That requires to use
> > pm_runtime_put instead of pm_runtime_put_autosuspend.
> >
> > TODO: GuC interface state save/restore.
> >
> > Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> > Cc: Chris Wilson <chris.p.wilson at intel.com>
> > Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> > ---
> >  drivers/gpu/drm/i915/i915_driver.c      | 26 +++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/intel_runtime_pm.c |  3 +--
> >  2 files changed, 27 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_driver.c
> > b/drivers/gpu/drm/i915/i915_driver.c
> > index aa1fb15b1f11..fcff5f3fe05e 100644
> > --- a/drivers/gpu/drm/i915/i915_driver.c
> > +++ b/drivers/gpu/drm/i915/i915_driver.c
> > @@ -1557,6 +1557,31 @@ static int i915_pm_restore(struct device *kdev)
> >  	return i915_pm_resume(kdev);
> >  }
> >
> > +static int intel_runtime_idle(struct device *kdev) {
> > +	struct drm_i915_private *dev_priv = kdev_to_i915(kdev);
> > +	int ret = 1;
> > +
> > +	if (!HAS_LMEM_SR(dev_priv)) {
> > +		/*TODO: Prepare for D3Cold-Off */
> > +		goto out;
> > +	}
> > +
> > +	disable_rpm_wakeref_asserts(&dev_priv->runtime_pm);
> > +
> > +	ret = intel_pm_vram_sr(dev_priv, true);
> > +	if (!ret)
> > +		drm_dbg(&dev_priv->drm, "VRAM Self Refresh enabled\n");
> 
> Please add the debug in the intel_pm_vram_sr() function instead.
Thanks for review comment, will fix this.
Regards,
Anshuman Gupta.
> 
> BR,
> Jani.
> 
> > +
> > +	enable_rpm_wakeref_asserts(&dev_priv->runtime_pm);
> > +
> > +out:
> > +	pm_runtime_mark_last_busy(kdev);
> > +	pm_runtime_autosuspend(kdev);
> > +
> > +	return ret;
> > +}
> > +
> >  static int intel_runtime_suspend(struct device *kdev)  {
> >  	struct drm_i915_private *dev_priv = kdev_to_i915(kdev); @@ -1742,6
> > +1767,7 @@ const struct dev_pm_ops i915_pm_ops = {
> >  	.restore = i915_pm_restore,
> >
> >  	/* S0ix (via runtime suspend) event handlers */
> > +	.runtime_idle = intel_runtime_idle,
> >  	.runtime_suspend = intel_runtime_suspend,
> >  	.runtime_resume = intel_runtime_resume,  }; diff --git
> > a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > index 6ed5786bcd29..4dade7e8a795 100644
> > --- a/drivers/gpu/drm/i915/intel_runtime_pm.c
> > +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
> > @@ -492,8 +492,7 @@ static void __intel_runtime_pm_put(struct
> > intel_runtime_pm *rpm,
> >
> >  	intel_runtime_pm_release(rpm, wakelock);
> >
> > -	pm_runtime_mark_last_busy(kdev);
> > -	pm_runtime_put_autosuspend(kdev);
> > +	pm_runtime_put(kdev);
> >  }
> >
> >  /**
> 
> --
> Jani Nikula, Intel Open Source Graphics Center