[Intel-gfx] [PATCH v2 13/13] drm/i915: Make the PIPESC rect relative to the entire bigjoiner area
Navare, Manasi
manasi.d.navare at intel.com
Thu Mar 3 22:41:23 UTC 2022
On Wed, Feb 23, 2022 at 03:13:15PM +0200, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> When using bigjoiner it's useful to know the offset of each
> individual pipe in the whole set of joined pipes. Let's include
> that information in our PIPESRC rectangle. With this we can make
> the plane clipping code blissfully unaware of bigjoiner usage, as
> all we have to do is remove the pipe's offset from the final plane
> destination coordinates.
>
> v2: Use intel_bigjoiner_num_pipes()
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> .../gpu/drm/i915/display/intel_atomic_plane.c | 7 +++---
> drivers/gpu/drm/i915/display/intel_cursor.c | 8 ++++---
> drivers/gpu/drm/i915/display/intel_display.c | 21 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_overlay.c | 22 +++++++++----------
> 4 files changed, 40 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_atomic_plane.c b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> index 3cbf66146da0..92ae4eebc62f 100644
> --- a/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> +++ b/drivers/gpu/drm/i915/display/intel_atomic_plane.c
> @@ -824,10 +824,6 @@ int intel_atomic_plane_check_clipping(struct intel_plane_state *plane_state,
> return -ERANGE;
> }
>
> - /* right side of the image is on the slave crtc, adjust dst to match */
> - if (intel_crtc_is_bigjoiner_slave(crtc_state))
> - drm_rect_translate(dst, -drm_rect_width(&crtc_state->pipe_src), 0);
> -
> /*
> * FIXME: This might need further adjustment for seamless scaling
> * with phase information, for the 2p2 and 2p1 scenarios.
> @@ -844,6 +840,9 @@ int intel_atomic_plane_check_clipping(struct intel_plane_state *plane_state,
> return -EINVAL;
> }
>
> + /* final plane coordinates will be relative to the plane's pipe */
> + drm_rect_translate(dst, -clip->x1, -clip->y1);
> +
> return 0;
> }
>
> diff --git a/drivers/gpu/drm/i915/display/intel_cursor.c b/drivers/gpu/drm/i915/display/intel_cursor.c
> index da6cf0515164..9279e2783e7e 100644
> --- a/drivers/gpu/drm/i915/display/intel_cursor.c
> +++ b/drivers/gpu/drm/i915/display/intel_cursor.c
> @@ -152,9 +152,11 @@ static int intel_check_cursor(struct intel_crtc_state *crtc_state,
> /* Use the unclipped src/dst rectangles, which we program to hw */
> plane_state->uapi.src = src;
> plane_state->uapi.dst = dst;
> - if (intel_crtc_is_bigjoiner_slave(crtc_state))
> - drm_rect_translate(&plane_state->uapi.dst,
> - -drm_rect_width(&crtc_state->pipe_src), 0);
> +
> + /* final plane coordinates will be relative to the plane's pipe */
> + drm_rect_translate(&plane_state->uapi.dst,
> + -crtc_state->pipe_src.x1,
> + -crtc_state->pipe_src.y1);
>
> ret = intel_cursor_check_surface(plane_state);
> if (ret)
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 7a09bb33c1eb..a9c15f27b948 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -3204,6 +3204,23 @@ static void intel_get_transcoder_timings(struct intel_crtc *crtc,
> }
> }
>
> +static void intel_bigjoiner_adjust_pipe_src(struct intel_crtc_state *crtc_state)
> +{
> + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> + int num_pipes = intel_bigjoiner_num_pipes(crtc_state);
> + enum pipe master_pipe, pipe = crtc->pipe;
> + int width;
> +
> + if (num_pipes < 2)
> + return;
> +
> + master_pipe = bigjoiner_master_pipe(crtc_state);
> + width = drm_rect_width(&crtc_state->pipe_src);
> +
> + drm_rect_translate_to(&crtc_state->pipe_src,
> + (pipe - master_pipe) * width, 0);
> +}
> +
> static void intel_get_pipe_src_size(struct intel_crtc *crtc,
> struct intel_crtc_state *pipe_config)
> {
> @@ -3216,6 +3233,8 @@ static void intel_get_pipe_src_size(struct intel_crtc *crtc,
> drm_rect_init(&pipe_config->pipe_src, 0, 0,
> REG_FIELD_GET(PIPESRC_WIDTH_MASK, tmp) + 1,
> REG_FIELD_GET(PIPESRC_HEIGHT_MASK, tmp) + 1);
> +
> + intel_bigjoiner_adjust_pipe_src(pipe_config);
> }
>
> static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state)
> @@ -5853,6 +5872,8 @@ intel_modeset_pipe_config_late(struct intel_crtc_state *crtc_state)
> struct drm_connector *connector;
> int i;
>
> + intel_bigjoiner_adjust_pipe_src(crtc_state);
> +
> for_each_new_connector_in_state(&state->base, connector,
> conn_state, i) {
> struct intel_encoder *encoder =
> diff --git a/drivers/gpu/drm/i915/display/intel_overlay.c b/drivers/gpu/drm/i915/display/intel_overlay.c
> index 631e1f1dc5e6..ee46561b5ae8 100644
> --- a/drivers/gpu/drm/i915/display/intel_overlay.c
> +++ b/drivers/gpu/drm/i915/display/intel_overlay.c
> @@ -958,21 +958,21 @@ static void update_pfit_vscale_ratio(struct intel_overlay *overlay)
> static int check_overlay_dst(struct intel_overlay *overlay,
> struct drm_intel_overlay_put_image *rec)
> {
> - const struct intel_crtc_state *pipe_config =
> + const struct intel_crtc_state *crtc_state =
> overlay->crtc->config;
> - int pipe_src_w = drm_rect_width(&pipe_config->pipe_src);
> - int pipe_src_h = drm_rect_height(&pipe_config->pipe_src);
> + struct drm_rect req, clipped;
>
> - if (rec->dst_height == 0 || rec->dst_width == 0)
> - return -EINVAL;
> + drm_rect_init(&req, rec->dst_x, rec->dst_y,
> + rec->dst_width, rec->dst_height);
> +
> + clipped = req;
> + drm_rect_intersect(&clipped, &crtc_state->pipe_src);
>
> - if (rec->dst_x < pipe_src_w &&
> - rec->dst_x + rec->dst_width <= pipe_src_w &&
> - rec->dst_y < pipe_src_h &&
> - rec->dst_y + rec->dst_height <= pipe_src_h)
> - return 0;
> - else
> + if (!drm_rect_visible(&clipped) ||
> + !drm_rect_equals(&clipped, &req))
> return -EINVAL;
> +
> + return 0;
I dont quite understand what we are trying to do here with the clipped ?
Can you elaborate a bit what this function does?
Manasi
> }
>
> static int check_overlay_scaling(struct drm_intel_overlay_put_image *rec)
> --
> 2.34.1
>
More information about the Intel-gfx
mailing list