[Intel-gfx] [PATCH 0/4] Drop wbinvd_on_all_cpus usage

[Tvrtko Ursulin]

On 22/03/2022 10:26, Thomas Hellström wrote:
> On Tue, 2022-03-22 at 10:13 +0000, Tvrtko Ursulin wrote:
>>
>> On 21/03/2022 15:15, Thomas Hellström wrote:
>>> On Mon, 2022-03-21 at 14:43 +0000, Tvrtko Ursulin wrote:
>>>>
>>>> On 21/03/2022 13:40, Thomas Hellström wrote:
>>>>> Hi,
>>>>>
>>>>> On Mon, 2022-03-21 at 13:12 +0000, Tvrtko Ursulin wrote:
>>>>>>
>>>>>> On 21/03/2022 12:33, Thomas Hellström wrote:
>>>>>>> On Mon, 2022-03-21 at 12:22 +0000, Tvrtko Ursulin wrote:
>>>>>>>>
>>>>>>>> On 21/03/2022 11:03, Thomas Hellström wrote:
>>>>>>>>> Hi, Tvrtko.
>>>>>>>>>
>>>>>>>>> On 3/21/22 11:27, Tvrtko Ursulin wrote:
>>>>>>>>>>
>>>>>>>>>> On 19/03/2022 19:42, Michael Cheng wrote:
>>>>>>>>>>> To align with the discussion in [1][2], this patch
>>>>>>>>>>> series
>>>>>>>>>>> drops
>>>>>>>>>>> all
>>>>>>>>>>> usage of
>>>>>>>>>>> wbvind_on_all_cpus within i915 by either replacing
>>>>>>>>>>> the
>>>>>>>>>>> call
>>>>>>>>>>> with certain
>>>>>>>>>>> drm clflush helpers, or reverting to a previous
>>>>>>>>>>> logic.
>>>>>>>>>>
>>>>>>>>>> AFAIU, complaint from [1] was that it is wrong to
>>>>>>>>>> provide
>>>>>>>>>> non
>>>>>>>>>> x86
>>>>>>>>>> implementations under the wbinvd_on_all_cpus name.
>>>>>>>>>> Instead an
>>>>>>>>>> arch
>>>>>>>>>> agnostic helper which achieves the same effect could
>>>>>>>>>> be
>>>>>>>>>> created.
>>>>>>>>>> Does
>>>>>>>>>> Arm have such concept?
>>>>>>>>>
>>>>>>>>> I also understand Linus' email like we shouldn't leak
>>>>>>>>> incoherent
>>>>>>>>> IO
>>>>>>>>> to
>>>>>>>>> other architectures, meaning any remaining wbinvd()s
>>>>>>>>> should
>>>>>>>>> be
>>>>>>>>> X86
>>>>>>>>> only.
>>>>>>>>
>>>>>>>> The last part is completely obvious since it is a x86
>>>>>>>> instruction
>>>>>>>> name.
>>>>>>>
>>>>>>> Yeah, I meant the function implementing wbinvd() semantics.
>>>>>>>
>>>>>>>>
>>>>>>>> But I think we can't pick a solution until we know how
>>>>>>>> the
>>>>>>>> concept
>>>>>>>> maps
>>>>>>>> to Arm and that will also include seeing how the
>>>>>>>> drm_clflush_sg for
>>>>>>>> Arm
>>>>>>>> would look. Is there a range based solution, or just a
>>>>>>>> big
>>>>>>>> hammer
>>>>>>>> there.
>>>>>>>> If the latter, then it is no good to churn all these
>>>>>>>> reverts
>>>>>>>> but
>>>>>>>> instead
>>>>>>>> an arch agnostic wrapper, with a generic name, would be
>>>>>>>> the
>>>>>>>> way to
>>>>>>>> go.
>>>>>>>
>>>>>>> But my impression was that ARM would not need the range-
>>>>>>> based
>>>>>>> interface
>>>>>>> either, because ARM is only for discrete and with discrete
>>>>>>> we're
>>>>>>> always
>>>>>>> coherent.
>>>>>>
>>>>>> Not sure what you mean here - what about flushing system
>>>>>> memory
>>>>>> objects
>>>>>> on discrete? Those still need flushing on paths like suspend
>>>>>> which this
>>>>>> series touches. Am I missing something?
>>>>>
>>>>> System bos on discrete should always have
>>>>>
>>>>> I915_BO_CACHE_COHERENT_FOR_READ |
>>>>> I915_BO_CACHE_COHERENT_FOR_WRITE
>>>>>
>>>>> either by the gpu being fully cache coherent (or us mapping
>>>>> system
>>>>> write-combined). Hence no need for cache clflushes or wbinvd()
>>>>> for
>>>>> incoherent IO.
>>>>
>>>> Hmm so you are talking about the shmem ttm backend. It ends up
>>>> depending on the result of i915_ttm_cache_level, yes? It cannot
>>>> end
>>>> up with I915_CACHE_NONE from that function?
>>>
>>> If the object is allocated with allowable placement in either LMEM
>>> or
>>> SYSTEM, and it ends in system, it gets allocated with
>>> I915_CACHE_NONE,
>>> but then the shmem ttm backend isn't used but TTM's wc pools, and
>>> the
>>> object should *always* be mapped wc. Even in system.
>>
>> I am not familiar with neither TTM backend or wc pools so maybe a
>> missed
>> question - if obj->cache_level can be set to none, and
>> obj->cache_coherency to zero, then during object lifetime helpers
>> which
>> consult those fields (like i915_gem_cpu_write_needs_clflush,
>> __start_cpu_write, etc) are giving out incorrect answers? That is, it
>> is
>> irrelevant that they would say flushes are required, since in
>> actuality
>> those objects can never ever and from anywhere be mapped other than
>> WC
>> so flushes aren't actually required?
> 
> If we map other than WC somewhere in these situations, that should be a
> bug needing a fix. It might be that some of these helpers that you
> mention might still flag that a clflush is needed, and in that case
> that's an oversight that also needs fixing.
> 
>>
>>>> I also found in i915_drm.h:
>>>>
>>>>            * As caching mode when specifying
>>>> `I915_MMAP_OFFSET_FIXED`,
>>>> WC or WB will
>>>>            * be used, depending on the object placement on
>>>> creation. WB
>>>> will be used
>>>>            * when the object can only exist in system memory, WC
>>>> otherwise.
>>>>
>>>> If what you say is true, that on discrete it is _always_ WC, then
>>>> that needs updating as well.
>>>
>>> If an object is allocated as system only, then it is mapped WB, and
>>> we're relying on the gpu being cache coherent to avoid clflushes.
>>> Same
>>> is actually currently true if the object happens to be accessed by
>>> the
>>> cpu while evicted. Might need an update for that.
>>
>> Hmm okay, I think I actually misunderstood something here. I think
>> the
>> reason for difference bbtween smem+lmem object which happens to be in
>> smem and smem only object is eluding me.
>>
>>>>>
>>>>> That's adhering to Linus'
>>>>>
>>>>> "And I sincerely hope to the gods that no cache-incoherent i915
>>>>> mess
>>>>> ever makes it out of the x86 world. Incoherent IO was always a
>>>>> historical mistake and should never ever happen again, so we
>>>>> should
>>>>> not spread that horrific pattern around."
>>>>
>>>> Sure, but I was not talking about IO - just the CPU side access
>>>> to
>>>> CPU side objects.
>>>
>>> OK, I was under the impression that clflushes() and wbinvd()s in
>>> i915
>>> was only ever used to make data visible to non-snooping GPUs.
>>>
>>> Do you mean that there are other uses as well? Agreed the wb cache
>>> flush on on suspend only if gpu is
>>> !I915_BO_CACHE_COHERENT_FOR_READ?
>>> looks to not fit this pattern completely.
>>
>> Don't know, I was first trying to understand handling of the
>> obj->cache_coherent as discussed in the first quote block. Are the
>> flags
>> consistently set and how the Arm low level code will look.
>>
>>> Otherwise, for architectures where memory isn't always fully
>>> coherent
>>> with the cpu cache, I'd expect them to use the apis in
>>> asm/cacheflush.h, like flush_cache_range() and similar, which are
>>> nops
>>> on x86.
>>
>> Hm do you know why there are no-ops? Like why wouldn't they map to
>> clflush?
> 
> I think it mostly boils down to the PIPT caches on x86. Everything is
> assumed to be coherent. Whereas some architextures keep different cache
> entries for different virtual addresses even if the physical page is
> the same...
> 
> clflushes and wbinvds on x86 are for odd arch-specific situations
> where, for example where we change caching attributes of the linear
> kernel map mappings.

So in summary we have flush_cache_range which is generic, not implemented on x86 and works with virtual addresses so not directly usable even if x86 implementation was added.

There is also x86 specific clflush_cache_range which works with virtual addresses as well so no good for drm_clflush_sg.

Question you implicitly raise, correct me if I got it wrong, is whether we should even be trying to extend drm_clflush_sg for Arm, given how most (all?) call sites are not needed on discrete, is that right?

Would that mean we could leave most of the code as is and just replace wbinvd_on_all_cpus with something like i915_flush_cpu_caches, which would then legitimately do nothing, at least on Arm if not also on discrete in general?

If that would work it would make a small and easy to review series. I don't think it would collide with what Linus asked since it is not propagating undesirable things further - given how if there is no actual need to flush then there is no need to make it range based either.

Exception would be the dmabuf get pages patch which needs a proper implementation of a new drm flush helper.

Regards,

Tvrtko