[Intel-gfx] [PATCH] drm/i915/dp: make DSC usage logging actually useful

[Jani Nikula]

On Wed, 30 Mar 2022, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
> On Wed, Mar 30, 2022 at 12:30:19PM +0300, Jani Nikula wrote:
>> Debug log when DSC is going to be used, and why, instead of
>> unconditionally logging the rarely used debug option setting, which
>> might not have any bearing on whether DSC is going to be used or not.
>> 
>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>> ---
>>  drivers/gpu/drm/i915/display/intel_dp.c | 19 ++++++++++++-------
>>  1 file changed, 12 insertions(+), 7 deletions(-)
>> 
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> index c7f8fc654857..56c36c9ef173 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> @@ -1483,6 +1483,7 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>>  		&pipe_config->hw.adjusted_mode;
>>  	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>>  	struct link_config_limits limits;
>> +	bool joiner_needs_dsc = false;
>>  	int ret;
>>  
>>  	limits.min_rate = intel_dp_common_rate(intel_dp, 0);
>> @@ -1518,19 +1519,23 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
>>  				    adjusted_mode->crtc_clock))
>>  		pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe);
>>  
>> +	/*
>> +	 * Pipe joiner needs compression up to display 12 due to bandwidth
>> +	 * limitation. DG2 onwards pipe joiner can be enabled without
>> +	 * compression.
>> +	 */
>> +	joiner_needs_dsc = DISPLAY_VER(i915) < 13 && pipe_config->bigjoiner_pipes;
>
> Could be a function to reduce the pollution.
>
> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Thanks, pushed to din.

>
> PS. The excessive debugs from intel_dp_dsc_get_output_bpp() are
> also annoying. Would be nice if someone could do something about
> that.

Huh, I thought I'd already done something about that. Or maybe I just
complained about that.

BR,
Jani.

>
>> +
>>  	/*
>>  	 * Optimize for slow and wide for everything, because there are some
>>  	 * eDP 1.3 and 1.4 panels don't work well with fast and narrow.
>>  	 */
>>  	ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
>>  
>> -	/*
>> -	 * Pipe joiner needs compression upto display12 due to BW limitation. DG2
>> -	 * onwards pipe joiner can be enabled without compression.
>> -	 */
>> -	drm_dbg_kms(&i915->drm, "Force DSC en = %d\n", intel_dp->force_dsc_en);
>> -	if (ret || intel_dp->force_dsc_en ||
>> -	    (DISPLAY_VER(i915) < 13 && pipe_config->bigjoiner_pipes)) {
>> +	if (ret || joiner_needs_dsc || intel_dp->force_dsc_en) {
>> +		drm_dbg_kms(&i915->drm, "Try DSC (fallback=%s, joiner=%s, force=%s)\n",
>> +			    str_yes_no(ret), str_yes_no(joiner_needs_dsc),
>> +			    str_yes_no(intel_dp->force_dsc_en));
>>  		ret = intel_dp_dsc_compute_config(intel_dp, pipe_config,
>>  						  conn_state, &limits);
>>  		if (ret < 0)
>> -- 
>> 2.30.2

-- 
Jani Nikula, Intel Open Source Graphics Center