[Intel-gfx] [PATCH 07/26] drm/i915: Adjust intel_modeset_pipe_config() & co. calling convention
Ville Syrjala
ville.syrjala at linux.intel.com
Tue May 3 18:22:23 UTC 2022
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Use the state+crtc calling convention for intel_modeset_pipe_config()
and othere related functions. Many of these need the full atomic state
anyway so passing it all the way through is just nicer than having to
worry about whether it can actually be extracted from eg. the crtc
state passed in.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 48 ++++++++++----------
1 file changed, 25 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 1093665122a4..4615cf3564eb 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -2811,9 +2811,11 @@ static int intel_crtc_compute_pipe_mode(struct intel_crtc_state *crtc_state)
return 0;
}
-static int intel_crtc_compute_config(struct intel_crtc *crtc,
- struct intel_crtc_state *crtc_state)
+static int intel_crtc_compute_config(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
+ struct intel_crtc_state *crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
int ret;
ret = intel_crtc_compute_pipe_src(crtc_state);
@@ -5052,11 +5054,12 @@ compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
}
static int
-compute_baseline_pipe_bpp(struct intel_crtc *crtc,
- struct intel_crtc_state *pipe_config)
+compute_baseline_pipe_bpp(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- struct drm_atomic_state *state = pipe_config->uapi.state;
+ struct intel_crtc_state *pipe_config =
+ intel_atomic_get_new_crtc_state(state, crtc);
struct drm_connector *connector;
struct drm_connector_state *connector_state;
int bpp, i;
@@ -5072,7 +5075,7 @@ compute_baseline_pipe_bpp(struct intel_crtc *crtc,
pipe_config->pipe_bpp = bpp;
/* Clamp display bpp to connector max bpp */
- for_each_new_connector_in_state(state, connector, connector_state, i) {
+ for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
int ret;
if (connector_state->crtc != &crtc->base)
@@ -5632,18 +5635,18 @@ intel_crtc_prepare_cleared_state(struct intel_atomic_state *state,
static int
intel_modeset_pipe_config(struct intel_atomic_state *state,
- struct intel_crtc_state *pipe_config)
+ struct intel_crtc *crtc)
{
- struct drm_crtc *crtc = pipe_config->uapi.crtc;
- struct drm_i915_private *i915 = to_i915(pipe_config->uapi.crtc->dev);
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+ struct intel_crtc_state *pipe_config =
+ intel_atomic_get_new_crtc_state(state, crtc);
struct drm_connector *connector;
struct drm_connector_state *connector_state;
int pipe_src_w, pipe_src_h;
int base_bpp, ret, i;
bool retry = true;
- pipe_config->cpu_transcoder =
- (enum transcoder) to_intel_crtc(crtc)->pipe;
+ pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
pipe_config->framestart_delay = 1;
@@ -5660,8 +5663,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
(DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
pipe_config->hw.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
- ret = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
- pipe_config);
+ ret = compute_baseline_pipe_bpp(state, crtc);
if (ret)
return ret;
@@ -5684,10 +5686,10 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
struct intel_encoder *encoder =
to_intel_encoder(connector_state->best_encoder);
- if (connector_state->crtc != crtc)
+ if (connector_state->crtc != &crtc->base)
continue;
- if (!check_single_encoder_cloning(state, to_intel_crtc(crtc), encoder)) {
+ if (!check_single_encoder_cloning(state, crtc, encoder)) {
drm_dbg_kms(&i915->drm,
"rejecting invalid cloning configuration\n");
return -EINVAL;
@@ -5722,7 +5724,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
struct intel_encoder *encoder =
to_intel_encoder(connector_state->best_encoder);
- if (connector_state->crtc != crtc)
+ if (connector_state->crtc != &crtc->base)
continue;
ret = encoder->compute_config(encoder, pipe_config,
@@ -5741,7 +5743,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
pipe_config->port_clock = pipe_config->hw.adjusted_mode.crtc_clock
* pipe_config->pixel_multiplier;
- ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
+ ret = intel_crtc_compute_config(state, crtc);
if (ret == -EDEADLK)
return ret;
if (ret == -EAGAIN) {
@@ -5772,11 +5774,11 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
}
static int
-intel_modeset_pipe_config_late(struct intel_crtc_state *crtc_state)
+intel_modeset_pipe_config_late(struct intel_atomic_state *state,
+ struct intel_crtc *crtc)
{
- struct intel_atomic_state *state =
- to_intel_atomic_state(crtc_state->uapi.state);
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct intel_crtc_state *crtc_state =
+ intel_atomic_get_new_crtc_state(state, crtc);
struct drm_connector_state *conn_state;
struct drm_connector *connector;
int i;
@@ -7705,7 +7707,7 @@ static int intel_atomic_check(struct drm_device *dev,
if (!new_crtc_state->hw.enable)
continue;
- ret = intel_modeset_pipe_config(state, new_crtc_state);
+ ret = intel_modeset_pipe_config(state, crtc);
if (ret)
goto fail;
@@ -7719,7 +7721,7 @@ static int intel_atomic_check(struct drm_device *dev,
if (!intel_crtc_needs_modeset(new_crtc_state))
continue;
- ret = intel_modeset_pipe_config_late(new_crtc_state);
+ ret = intel_modeset_pipe_config_late(state, crtc);
if (ret)
goto fail;
--
2.35.1
More information about the Intel-gfx
mailing list