[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915: Make fastset not suck and allow seamless M/N changes (rev4)

[Patchwork]

== Series Details ==

Series: drm/i915: Make fastset not suck and allow seamless M/N changes (rev4)
URL   : https://patchwork.freedesktop.org/series/103491/
State : warning

== Summary ==

Error: dim checkpatch failed
c22b28cfffd3 drm/i915: Split shared dpll .get_dplls() into compute and get phases
-:194: CHECK:CAMELCASE: Avoid CamelCase: <SPLL_FREQ_1350MHz>
#194: FILE: drivers/gpu/drm/i915/display/intel_dpll_mgr.c:1063:
+		SPLL_PLL_ENABLE | SPLL_FREQ_1350MHz | SPLL_REF_MUXED_SSC;

total: 0 errors, 0 warnings, 1 checks, 516 lines checked
879cc74477fa drm/i915: Do .crtc_compute_clock() earlier
35d18170c1ab drm/i915: Clean up DPLL related debugs
bd06d6413c61 drm/i915: Reassign DPLLs only for crtcs going throug .compute_config()
60c9a564c630 drm/i915: Extract PIPE_CONF_CHECK_TIMINGS()
-:21: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'name' - possible side-effects?
#21: FILE: drivers/gpu/drm/i915/display/intel_display.c:6076:
+#define PIPE_CONF_CHECK_TIMINGS(name) do { \
+	PIPE_CONF_CHECK_I(name.crtc_hdisplay); \
+	PIPE_CONF_CHECK_I(name.crtc_htotal); \
+	PIPE_CONF_CHECK_I(name.crtc_hblank_start); \
+	PIPE_CONF_CHECK_I(name.crtc_hblank_end); \
+	PIPE_CONF_CHECK_I(name.crtc_hsync_start); \
+	PIPE_CONF_CHECK_I(name.crtc_hsync_end); \
+	PIPE_CONF_CHECK_I(name.crtc_vdisplay); \
+	PIPE_CONF_CHECK_I(name.crtc_vtotal); \
+	PIPE_CONF_CHECK_I(name.crtc_vblank_start); \
+	PIPE_CONF_CHECK_I(name.crtc_vblank_end); \
+	PIPE_CONF_CHECK_I(name.crtc_vsync_start); \
+	PIPE_CONF_CHECK_I(name.crtc_vsync_end); \
+} while (0)

total: 0 errors, 0 warnings, 1 checks, 63 lines checked
6de8ad90b89b drm/i915: Extract PIPE_CONF_CHECK_RECT()
-:21: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'name' - possible side-effects?
#21: FILE: drivers/gpu/drm/i915/display/intel_display.c:6091:
+#define PIPE_CONF_CHECK_RECT(name) do { \
+	PIPE_CONF_CHECK_I(name.x1); \
+	PIPE_CONF_CHECK_I(name.x2); \
+	PIPE_CONF_CHECK_I(name.y1); \
+	PIPE_CONF_CHECK_I(name.y2); \
+} while (0)

total: 0 errors, 0 warnings, 1 checks, 40 lines checked
514a77ad0c48 drm/i915: Adjust intel_modeset_pipe_config() & co. calling convention
-:81: CHECK:SPACING: No space is necessary after a cast
#81: FILE: drivers/gpu/drm/i915/display/intel_display.c:5649:
+	pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;

total: 0 errors, 0 warnings, 1 checks, 127 lines checked
99f57f1bbfb6 drm/i915: s/pipe_config/crtc_state/
-:92: CHECK:SPACING: No space is necessary after a cast
#92: FILE: drivers/gpu/drm/i915/display/intel_display.c:5649:
+	crtc_state->cpu_transcoder = (enum transcoder) crtc->pipe;

-:190: CHECK:SPACING: spaces preferred around that '*' (ctx:VxV)
#190: FILE: drivers/gpu/drm/i915/display/intel_display.c:5767:
+	crtc_state->dither = (crtc_state->pipe_bpp == 6*3) &&
 	                                               ^

total: 0 errors, 0 warnings, 2 checks, 169 lines checked
24b44ff8d3cc drm/i915: Improve modeset debugs
6736bc609e67 drm/i915: Extract intel_crtc_dotclock()
cf4444c0b6db drm/i915: Introduce struct iclkip_params
5f9ecd0a3455 drm/i915: Feed the DPLL output freq back into crtc_state
-:36: WARNING:AVOID_EXTERNS: externs should be avoided in .c files
#36: FILE: drivers/gpu/drm/i915/display/intel_dpll.c:933:
+int intel_crtc_dotclock(const struct intel_crtc_state *crtc_state);

-:181: WARNING:AVOID_EXTERNS: externs should be avoided in .c files
#181: FILE: drivers/gpu/drm/i915/display/intel_dpll.c:1460:
+int intel_calculate_dotclock(const struct intel_crtc_state *crtc_state);

total: 0 errors, 2 warnings, 0 checks, 261 lines checked
b99e6189702a drm/i915: Compute clocks earlier
90e0b8e479b7 drm/i915: Skip FDI vs. dotclock sanity check during readout
b1ba2dd163dc drm/i915: Make M/N checks non-fuzzy
a21379dc8365 drm/i915: Make all clock checks non-fuzzy
c310a1210f63 drm/i915: Set active dpll early for icl+
86fafa6d29d8 drm/i915: Nuke fastet state copy hacks
9811567591ac drm/i915: Skip intel_modeset_pipe_config_late() if the pipe is not enabled
2c1626fe0bbb drm/i915: Check hw.enable and hw.active in intel_pipe_config_compare()
d699f5d194c8 drm/i915: Add intel_panel_highest_mode()
190d3ba0aa1f drm/i915: Allow M/N change during fastset on bdw+
d686b8dfd9db drm/i915: Require an exact DP link freq match for the DG2 PLL
b470ae0f272b drm/i915: Use a fixed N value always
fd6a9551796d drm/i915: Round to closest in M/N calculations
7b1987f4581b drm/i915: Round TMDS clock to nearest