[Intel-gfx] [PATCH 06/25] drm/edid: propagate drm_edid to drm_edid_to_eld()

Jani Nikula jani.nikula at intel.com
Fri May 6 10:10:13 UTC 2022


We'll need to propagate	drm_edid everywhere.

Signed-off-by: Jani Nikula <jani.nikula at intel.com>
---
 drivers/gpu/drm/drm_edid.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index c9d48fbd0a76..74038be72ad3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4865,13 +4865,13 @@ static void clear_eld(struct drm_connector *connector)
 /*
  * drm_edid_to_eld - build ELD from EDID
  * @connector: connector corresponding to the HDMI/DP sink
- * @edid: EDID to parse
+ * @drm_edid: EDID to parse
  *
  * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
  * HDCP and Port_ID ELD fields are left for the graphics driver to fill in.
  */
 static void drm_edid_to_eld(struct drm_connector *connector,
-			    const struct edid *edid)
+			    const struct drm_edid *drm_edid)
 {
 	const struct drm_display_info *info = &connector->display_info;
 	const struct cea_db *db;
@@ -4882,10 +4882,10 @@ static void drm_edid_to_eld(struct drm_connector *connector,
 
 	clear_eld(connector);
 
-	if (!edid)
+	if (!drm_edid)
 		return;
 
-	mnl = get_monitor_name(edid, &eld[DRM_ELD_MONITOR_NAME_STRING]);
+	mnl = get_monitor_name(drm_edid->edid, &eld[DRM_ELD_MONITOR_NAME_STRING]);
 	DRM_DEBUG_KMS("ELD monitor %s\n", &eld[DRM_ELD_MONITOR_NAME_STRING]);
 
 	eld[DRM_ELD_CEA_EDID_VER_MNL] = info->cea_rev << DRM_ELD_CEA_EDID_VER_SHIFT;
@@ -4893,12 +4893,12 @@ static void drm_edid_to_eld(struct drm_connector *connector,
 
 	eld[DRM_ELD_VER] = DRM_ELD_VER_CEA861D;
 
-	eld[DRM_ELD_MANUFACTURER_NAME0] = edid->mfg_id[0];
-	eld[DRM_ELD_MANUFACTURER_NAME1] = edid->mfg_id[1];
-	eld[DRM_ELD_PRODUCT_CODE0] = edid->prod_code[0];
-	eld[DRM_ELD_PRODUCT_CODE1] = edid->prod_code[1];
+	eld[DRM_ELD_MANUFACTURER_NAME0] = drm_edid->edid->mfg_id[0];
+	eld[DRM_ELD_MANUFACTURER_NAME1] = drm_edid->edid->mfg_id[1];
+	eld[DRM_ELD_PRODUCT_CODE0] = drm_edid->edid->prod_code[0];
+	eld[DRM_ELD_PRODUCT_CODE1] = drm_edid->edid->prod_code[1];
 
-	cea_db_iter_edid_begin(edid, &iter);
+	cea_db_iter_edid_begin(drm_edid->edid, &iter);
 	cea_db_iter_for_each(db, &iter) {
 		const u8 *data = cea_db_data(db);
 		int len = cea_db_payload_len(db);
@@ -5848,7 +5848,7 @@ static int drm_edid_connector_update(struct drm_connector *connector,
 	quirks = update_display_info(connector, drm_edid);
 
 	/* Depends on info->cea_rev set by drm_add_display_info() above */
-	drm_edid_to_eld(connector, edid);
+	drm_edid_to_eld(connector, drm_edid);
 
 	/*
 	 * EDID spec says modes should be preferred in this order:
-- 
2.30.2



More information about the Intel-gfx mailing list