[Intel-gfx] [PATCH 1/2] drm/i915: Enable THP on Icelake and beyond

[Tvrtko Ursulin]

On 09/05/2022 11:49, Matthew Auld wrote:
> On 29/04/2022 11:04, Tvrtko Ursulin wrote:
>> From: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>>
>> We have a statement from HW designers that the GPU read regression when
>> using 2M pages was fixed from Icelake onwards, which was also confirmed
>> by bencharking Eero did last year:
>>
>> """
>> When IOMMU is disabled, enabling THP causes following perf changes on
>> TGL-H (GT1):
>>
>>      10-15% SynMark Batch[0-3]
>>      5-10% MemBW GPU texture, SynMark ShMapVsm
>>      3-5% SynMark TerrainFly* + Geom* + Fill* + CSCloth + Batch4
>>      1-3% GpuTest Triangle, SynMark TexMem* + DeferredAA + Batch[5-7]
>>            + few others
>>      -7% MemBW GPU blend
>>
>> In the above 3D benchmark names, * means all the variants of tests with
>> the same prefix. For example "SynMark TexMem*", means both TexMem128 &
>> TexMem512 tests in the synthetic (Intel internal) SynMark test suite.
>>
>> In the (public, but proprietary) GfxBench & GLB(enchmark) test suites,
>> there are both onscreen and offscreen variants of each test. Unless
>> explicitly stated otherwise, numbers are for both variants.
>>
>> All tests are run with FullHD monitor. All tests are fullscreen except
>> for GLB and GpuTest ones, which are run in 1/2 screen window (GpuTest
>> triangle is run both in fullscreen and 1/2 screen window).
>> """
>>
>> Since the only regression is MemBW GPU blend, against many more gains,
>> it sounds it is time to enable THP on Gen11+.
>>
>> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
>> References: https://gitlab.freedesktop.org/drm/intel/-/issues/430
>> Cc: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
>> Cc: Matthew Auld <matthew.auld at intel.com>
>> Cc: Eero Tamminen <eero.t.tamminen at intel.com>
> 
> fwiw, for the series,
> Reviewed-by: Matthew Auld <matthew.auld at intel.com>

Thanks! With a statement from hw arch, benchmark results from Eero and a 
r-b from you, I think it is justified to push this so I have. Lets see 
if someone notices an improvement.

Regards,

Tvrtko

> 
>> ---
>>   drivers/gpu/drm/i915/gem/i915_gemfs.c | 13 +++++++++----
>>   1 file changed, 9 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/gem/i915_gemfs.c 
>> b/drivers/gpu/drm/i915/gem/i915_gemfs.c
>> index ee87874e59dc..c5a6bbc842fc 100644
>> --- a/drivers/gpu/drm/i915/gem/i915_gemfs.c
>> +++ b/drivers/gpu/drm/i915/gem/i915_gemfs.c
>> @@ -28,12 +28,14 @@ int i915_gemfs_init(struct drm_i915_private *i915)
>>        *
>>        * One example, although it is probably better with a per-file
>>        * control, is selecting huge page allocations 
>> ("huge=within_size").
>> -     * However, we only do so to offset the overhead of iommu lookups
>> -     * due to bandwidth issues (slow reads) on Broadwell+.
>> +     * However, we only do so on platforms which benefit from it, or to
>> +     * offset the overhead of iommu lookups, where with latter it is 
>> a net
>> +     * win even on platforms which would otherwise see some performance
>> +     * regressions such a slow reads issue on Broadwell and Skylake.
>>        */
>>       opts = NULL;
>> -    if (i915_vtd_active(i915)) {
>> +    if (GRAPHICS_VER(i915) >= 11 || i915_vtd_active(i915)) {
>>           if (IS_ENABLED(CONFIG_TRANSPARENT_HUGEPAGE)) {
>>               opts = huge_opt;
>>               drm_info(&i915->drm,
>> @@ -41,7 +43,10 @@ int i915_gemfs_init(struct drm_i915_private *i915)
>>                    opts);
>>           } else {
>>               drm_notice(&i915->drm,
>> -                   "Transparent Hugepage support is recommended for 
>> optimal performance when IOMMU is enabled!\n");
>> +                   "Transparent Hugepage support is recommended for 
>> optimal performance%s\n",
>> +                   GRAPHICS_VER(i915) >= 11 ?
>> +                   " on this platform!" :
>> +                   " when IOMMU is enabled!");
>>           }
>>       }