[Intel-gfx] [PATCH 3/7] drm/i915/pcode: Extend pcode functions for multiple gt's
Jani Nikula
jani.nikula at intel.com
Thu May 12 10:36:31 UTC 2022
On Wed, 11 May 2022, Ashutosh Dixit <ashutosh.dixit at intel.com> wrote:
> Each gt contains an independent instance of pcode. Extend pcode functions
> to interface with pcode on different gt's. To avoid creating dependency of
> display functionality on intel_gt, pcode function interfaces are exposed in
> terms of uncore rather than intel_gt. Callers have been converted to pass
> in the appropritate (i915 or intel_gt) uncore to the pcode functions.
>
> v2: Expose pcode functions in terms of uncore rather than gt (Jani/Rodrigo)
> v3: Retain previous function names to eliminate needless #defines (Rodrigo)
> v4: Move out i915_pcode_init() to a separate patch (Tvrtko)
> Remove duplicated drm_err/drm_dbg from intel_pcode_init() (Tvrtko)
Couple of nitpicks inline, and not insisting on changing. Basically ack
on this from me.
>
> Cc: Tvrtko Ursulin <tvrtko.ursulin at linux.intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit at intel.com>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Reviewed-by: Andi Shyti <andi.shyti at linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/hsw_ips.c | 4 +-
> drivers/gpu/drm/i915/display/intel_bw.c | 6 +-
> drivers/gpu/drm/i915/display/intel_cdclk.c | 16 ++---
> .../drm/i915/display/intel_display_power.c | 2 +-
> .../i915/display/intel_display_power_well.c | 4 +-
> drivers/gpu/drm/i915/display/intel_hdcp.c | 2 +-
> drivers/gpu/drm/i915/gt/intel_gt_pm_debugfs.c | 4 +-
> drivers/gpu/drm/i915/gt/intel_llc.c | 3 +-
> drivers/gpu/drm/i915/gt/intel_rc6.c | 4 +-
> drivers/gpu/drm/i915/gt/intel_rps.c | 4 +-
> drivers/gpu/drm/i915/gt/selftest_llc.c | 2 +-
> drivers/gpu/drm/i915/gt/selftest_rps.c | 2 +-
> drivers/gpu/drm/i915/i915_driver.c | 4 +-
> drivers/gpu/drm/i915/intel_dram.c | 2 +-
> drivers/gpu/drm/i915/intel_pcode.c | 69 ++++++++-----------
> drivers/gpu/drm/i915/intel_pcode.h | 14 ++--
> drivers/gpu/drm/i915/intel_pm.c | 10 +--
> 17 files changed, 70 insertions(+), 82 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/hsw_ips.c b/drivers/gpu/drm/i915/display/hsw_ips.c
> index 38014e0cc9ad..861dcd2eb890 100644
> --- a/drivers/gpu/drm/i915/display/hsw_ips.c
> +++ b/drivers/gpu/drm/i915/display/hsw_ips.c
> @@ -28,7 +28,7 @@ static void hsw_ips_enable(const struct intel_crtc_state *crtc_state)
>
> if (IS_BROADWELL(i915)) {
> drm_WARN_ON(&i915->drm,
> - snb_pcode_write(i915, DISPLAY_IPS_CONTROL,
> + snb_pcode_write(&i915->uncore, DISPLAY_IPS_CONTROL,
> IPS_ENABLE | IPS_PCODE_CONTROL));
> /*
> * Quoting Art Runyan: "its not safe to expect any particular
> @@ -62,7 +62,7 @@ bool hsw_ips_disable(const struct intel_crtc_state *crtc_state)
>
> if (IS_BROADWELL(i915)) {
> drm_WARN_ON(&i915->drm,
> - snb_pcode_write(i915, DISPLAY_IPS_CONTROL, 0));
> + snb_pcode_write(&i915->uncore, DISPLAY_IPS_CONTROL, 0));
> /*
> * Wait for PCODE to finish disabling IPS. The BSpec specified
> * 42ms timeout value leads to occasional timeouts so use 100ms
> diff --git a/drivers/gpu/drm/i915/display/intel_bw.c b/drivers/gpu/drm/i915/display/intel_bw.c
> index 37bd7b17f3d0..79269d2c476b 100644
> --- a/drivers/gpu/drm/i915/display/intel_bw.c
> +++ b/drivers/gpu/drm/i915/display/intel_bw.c
> @@ -78,7 +78,7 @@ static int icl_pcode_read_qgv_point_info(struct drm_i915_private *dev_priv,
> u16 dclk;
> int ret;
>
> - ret = snb_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
> + ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
> ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point),
> &val, &val2);
> if (ret)
> @@ -104,7 +104,7 @@ static int adls_pcode_read_psf_gv_point_info(struct drm_i915_private *dev_priv,
> int ret;
> int i;
>
> - ret = snb_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
> + ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
> ADL_PCODE_MEM_SS_READ_PSF_GV_INFO, &val, NULL);
> if (ret)
> return ret;
> @@ -123,7 +123,7 @@ int icl_pcode_restrict_qgv_points(struct drm_i915_private *dev_priv,
> int ret;
>
> /* bspec says to keep retrying for at least 1 ms */
> - ret = skl_pcode_request(dev_priv, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
> + ret = skl_pcode_request(&dev_priv->uncore, ICL_PCODE_SAGV_DE_MEM_SS_CONFIG,
> points_mask,
> ICL_PCODE_REP_QGV_MASK | ADLS_PCODE_REP_PSF_MASK,
> ICL_PCODE_REP_QGV_SAFE | ADLS_PCODE_REP_PSF_SAFE,
> diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
> index b2017d8161b4..6e80162632dd 100644
> --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> @@ -800,7 +800,7 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
> "trying to change cdclk frequency with cdclk not enabled\n"))
> return;
>
> - ret = snb_pcode_write(dev_priv, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
> + ret = snb_pcode_write(&dev_priv->uncore, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
> if (ret) {
> drm_err(&dev_priv->drm,
> "failed to inform pcode about cdclk change\n");
> @@ -828,7 +828,7 @@ static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
> LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
> drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
>
> - snb_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
> + snb_pcode_write(&dev_priv->uncore, HSW_PCODE_DE_WRITE_FREQ_REQ,
> cdclk_config->voltage_level);
>
> intel_de_write(dev_priv, CDCLK_FREQ,
> @@ -1086,7 +1086,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
> drm_WARN_ON_ONCE(&dev_priv->drm,
> IS_SKYLAKE(dev_priv) && vco == 8640000);
>
> - ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> + ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> SKL_CDCLK_PREPARE_FOR_CHANGE,
> SKL_CDCLK_READY_FOR_CHANGE,
> SKL_CDCLK_READY_FOR_CHANGE, 3);
> @@ -1132,7 +1132,7 @@ static void skl_set_cdclk(struct drm_i915_private *dev_priv,
> intel_de_posting_read(dev_priv, CDCLK_CTL);
>
> /* inform PCU of the change */
> - snb_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> + snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> cdclk_config->voltage_level);
>
> intel_update_cdclk(dev_priv);
> @@ -1702,7 +1702,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
>
> /* Inform power controller of upcoming frequency change. */
> if (DISPLAY_VER(dev_priv) >= 11)
> - ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> + ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> SKL_CDCLK_PREPARE_FOR_CHANGE,
> SKL_CDCLK_READY_FOR_CHANGE,
> SKL_CDCLK_READY_FOR_CHANGE, 3);
> @@ -1711,7 +1711,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> * BSpec requires us to wait up to 150usec, but that leads to
> * timeouts; the 2ms used here is based on experiment.
> */
> - ret = snb_pcode_write_timeout(dev_priv,
> + ret = snb_pcode_write_timeout(&dev_priv->uncore,
> HSW_PCODE_DE_WRITE_FREQ_REQ,
> 0x80000000, 150, 2);
> if (ret) {
> @@ -1774,7 +1774,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
>
> if (DISPLAY_VER(dev_priv) >= 11) {
> - ret = snb_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
> + ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
> cdclk_config->voltage_level);
> } else {
> /*
> @@ -1783,7 +1783,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> * FIXME: Waiting for the request completion could be delayed
> * until the next PCODE request based on BSpec.
> */
> - ret = snb_pcode_write_timeout(dev_priv,
> + ret = snb_pcode_write_timeout(&dev_priv->uncore,
> HSW_PCODE_DE_WRITE_FREQ_REQ,
> cdclk_config->voltage_level,
> 150, 2);
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
> index 1d9bd5808849..74249da35281 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power.c
> @@ -1194,7 +1194,7 @@ static u32 hsw_read_dcomp(struct drm_i915_private *dev_priv)
> static void hsw_write_dcomp(struct drm_i915_private *dev_priv, u32 val)
> {
> if (IS_HASWELL(dev_priv)) {
> - if (snb_pcode_write(dev_priv, GEN6_PCODE_WRITE_D_COMP, val))
> + if (snb_pcode_write(&dev_priv->uncore, GEN6_PCODE_WRITE_D_COMP, val))
> drm_dbg_kms(&dev_priv->drm,
> "Failed to write to D_COMP\n");
> } else {
> diff --git a/drivers/gpu/drm/i915/display/intel_display_power_well.c b/drivers/gpu/drm/i915/display/intel_display_power_well.c
> index 5be18eb94042..91cfd5890f46 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_power_well.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_power_well.c
> @@ -474,7 +474,7 @@ static void icl_tc_cold_exit(struct drm_i915_private *i915)
> int ret, tries = 0;
>
> while (1) {
> - ret = snb_pcode_write_timeout(i915, ICL_PCODE_EXIT_TCCOLD, 0,
> + ret = snb_pcode_write_timeout(&i915->uncore, ICL_PCODE_EXIT_TCCOLD, 0,
> 250, 1);
> if (ret != -EAGAIN || ++tries == 3)
> break;
> @@ -1739,7 +1739,7 @@ tgl_tc_cold_request(struct drm_i915_private *i915, bool block)
> * Spec states that we should timeout the request after 200us
> * but the function below will timeout after 500us
> */
> - ret = snb_pcode_read(i915, TGL_PCODE_TCCOLD, &low_val, &high_val);
> + ret = snb_pcode_read(&i915->uncore, TGL_PCODE_TCCOLD, &low_val, &high_val);
> if (ret == 0) {
> if (block &&
> (low_val & TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED))
> diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index 44ac0cee8b77..8ea66a2e1b09 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -298,7 +298,7 @@ static int intel_hdcp_load_keys(struct drm_i915_private *dev_priv)
> * Mailbox interface.
> */
> if (DISPLAY_VER(dev_priv) == 9 && !IS_BROXTON(dev_priv)) {
> - ret = snb_pcode_write(dev_priv, SKL_PCODE_LOAD_HDCP_KEYS, 1);
> + ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_LOAD_HDCP_KEYS, 1);
> if (ret) {
> drm_err(&dev_priv->drm,
> "Failed to initiate HDCP key load (%d)\n",
> diff --git a/drivers/gpu/drm/i915/gt/intel_gt_pm_debugfs.c b/drivers/gpu/drm/i915/gt/intel_gt_pm_debugfs.c
> index 0c6b9eb724ae..90a440865037 100644
> --- a/drivers/gpu/drm/i915/gt/intel_gt_pm_debugfs.c
> +++ b/drivers/gpu/drm/i915/gt/intel_gt_pm_debugfs.c
> @@ -138,7 +138,7 @@ static int gen6_drpc(struct seq_file *m)
> }
>
> if (GRAPHICS_VER(i915) <= 7)
> - snb_pcode_read(i915, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
> + snb_pcode_read(gt->uncore, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
Pedantically, I'm wondering if this (and similar places) should first be
i915->uncore, to be replaced with gt->uncore in the next patch.
>
> seq_printf(m, "RC1e Enabled: %s\n",
> str_yes_no(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE));
> @@ -545,7 +545,7 @@ static int llc_show(struct seq_file *m, void *data)
> wakeref = intel_runtime_pm_get(gt->uncore->rpm);
> for (gpu_freq = min_gpu_freq; gpu_freq <= max_gpu_freq; gpu_freq++) {
> ia_freq = gpu_freq;
> - snb_pcode_read(i915, GEN6_PCODE_READ_MIN_FREQ_TABLE,
> + snb_pcode_read(gt->uncore, GEN6_PCODE_READ_MIN_FREQ_TABLE,
> &ia_freq, NULL);
> seq_printf(m, "%d\t\t%d\t\t\t\t%d\n",
> intel_gpu_freq(rps,
> diff --git a/drivers/gpu/drm/i915/gt/intel_llc.c b/drivers/gpu/drm/i915/gt/intel_llc.c
> index 40e2e28ee6c7..14fe65812e42 100644
> --- a/drivers/gpu/drm/i915/gt/intel_llc.c
> +++ b/drivers/gpu/drm/i915/gt/intel_llc.c
> @@ -124,7 +124,6 @@ static void calc_ia_freq(struct intel_llc *llc,
>
> static void gen6_update_ring_freq(struct intel_llc *llc)
> {
> - struct drm_i915_private *i915 = llc_to_gt(llc)->i915;
> struct ia_constants consts;
> unsigned int gpu_freq;
>
> @@ -142,7 +141,7 @@ static void gen6_update_ring_freq(struct intel_llc *llc)
> unsigned int ia_freq, ring_freq;
>
> calc_ia_freq(llc, gpu_freq, &consts, &ia_freq, &ring_freq);
> - snb_pcode_write(i915, GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
> + snb_pcode_write(llc_to_gt(llc)->uncore, GEN6_PCODE_WRITE_MIN_FREQ_TABLE,
> ia_freq << GEN6_PCODE_FREQ_IA_RATIO_SHIFT |
> ring_freq << GEN6_PCODE_FREQ_RING_RATIO_SHIFT |
> gpu_freq);
> diff --git a/drivers/gpu/drm/i915/gt/intel_rc6.c b/drivers/gpu/drm/i915/gt/intel_rc6.c
> index b4770690e794..f8d0523f4c18 100644
> --- a/drivers/gpu/drm/i915/gt/intel_rc6.c
> +++ b/drivers/gpu/drm/i915/gt/intel_rc6.c
> @@ -272,7 +272,7 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6)
> GEN6_RC_CTL_HW_ENABLE;
>
> rc6vids = 0;
> - ret = snb_pcode_read(i915, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
> + ret = snb_pcode_read(rc6_to_gt(rc6)->uncore, GEN6_PCODE_READ_RC6VIDS, &rc6vids, NULL);
> if (GRAPHICS_VER(i915) == 6 && ret) {
> drm_dbg(&i915->drm, "Couldn't check for BIOS workaround\n");
> } else if (GRAPHICS_VER(i915) == 6 &&
> @@ -282,7 +282,7 @@ static void gen6_rc6_enable(struct intel_rc6 *rc6)
> GEN6_DECODE_RC6_VID(rc6vids & 0xff), 450);
> rc6vids &= 0xffff00;
> rc6vids |= GEN6_ENCODE_RC6_VID(450);
> - ret = snb_pcode_write(i915, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
> + ret = snb_pcode_write(rc6_to_gt(rc6)->uncore, GEN6_PCODE_WRITE_RC6VIDS, rc6vids);
> if (ret)
> drm_err(&i915->drm,
> "Couldn't fix incorrect rc6 voltage\n");
> diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
> index 3bd8415a0f1b..a62d323ff056 100644
> --- a/drivers/gpu/drm/i915/gt/intel_rps.c
> +++ b/drivers/gpu/drm/i915/gt/intel_rps.c
> @@ -1144,7 +1144,7 @@ static void gen6_rps_init(struct intel_rps *rps)
>
> if (IS_GEN9_BC(i915) || GRAPHICS_VER(i915) >= 11)
> mult = GEN9_FREQ_SCALER;
> - if (snb_pcode_read(i915, HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
> + if (snb_pcode_read(rps_to_gt(rps)->uncore, HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL,
> &ddcc_status, NULL) == 0)
> rps->efficient_freq =
> clamp_t(u32,
> @@ -1984,7 +1984,7 @@ void intel_rps_init(struct intel_rps *rps)
> if (GRAPHICS_VER(i915) == 6 || IS_IVYBRIDGE(i915) || IS_HASWELL(i915)) {
> u32 params = 0;
>
> - snb_pcode_read(i915, GEN6_READ_OC_PARAMS, ¶ms, NULL);
> + snb_pcode_read(rps_to_gt(rps)->uncore, GEN6_READ_OC_PARAMS, ¶ms, NULL);
> if (params & BIT(31)) { /* OC supported */
> drm_dbg(&i915->drm,
> "Overclocking supported, max: %dMHz, overclock: %dMHz\n",
> diff --git a/drivers/gpu/drm/i915/gt/selftest_llc.c b/drivers/gpu/drm/i915/gt/selftest_llc.c
> index 2cd184ab32b1..cfd736d88939 100644
> --- a/drivers/gpu/drm/i915/gt/selftest_llc.c
> +++ b/drivers/gpu/drm/i915/gt/selftest_llc.c
> @@ -31,7 +31,7 @@ static int gen6_verify_ring_freq(struct intel_llc *llc)
> calc_ia_freq(llc, gpu_freq, &consts, &ia_freq, &ring_freq);
>
> val = gpu_freq;
> - if (snb_pcode_read(i915, GEN6_PCODE_READ_MIN_FREQ_TABLE,
> + if (snb_pcode_read(llc_to_gt(llc)->uncore, GEN6_PCODE_READ_MIN_FREQ_TABLE,
> &val, NULL)) {
> pr_err("Failed to read freq table[%d], range [%d, %d]\n",
> gpu_freq, consts.min_gpu_freq, consts.max_gpu_freq);
> diff --git a/drivers/gpu/drm/i915/gt/selftest_rps.c b/drivers/gpu/drm/i915/gt/selftest_rps.c
> index 6a69ac0184ad..cfb4708dd62e 100644
> --- a/drivers/gpu/drm/i915/gt/selftest_rps.c
> +++ b/drivers/gpu/drm/i915/gt/selftest_rps.c
> @@ -521,7 +521,7 @@ static void show_pcu_config(struct intel_rps *rps)
> for (gpu_freq = min_gpu_freq; gpu_freq <= max_gpu_freq; gpu_freq++) {
> int ia_freq = gpu_freq;
>
> - snb_pcode_read(i915, GEN6_PCODE_READ_MIN_FREQ_TABLE,
> + snb_pcode_read(rps_to_gt(rps)->uncore, GEN6_PCODE_READ_MIN_FREQ_TABLE,
> &ia_freq, NULL);
>
> pr_info("%5d %5d %5d\n",
> diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
> index 90b0ce5051af..0e9763868d68 100644
> --- a/drivers/gpu/drm/i915/i915_driver.c
> +++ b/drivers/gpu/drm/i915/i915_driver.c
> @@ -629,7 +629,7 @@ static int i915_driver_hw_probe(struct drm_i915_private *dev_priv)
>
> intel_opregion_setup(dev_priv);
>
> - ret = intel_pcode_init(dev_priv);
> + ret = intel_pcode_init(&dev_priv->uncore);
> if (ret)
> goto err_msi;
>
> @@ -1251,7 +1251,7 @@ static int i915_drm_resume(struct drm_device *dev)
>
> disable_rpm_wakeref_asserts(&dev_priv->runtime_pm);
>
> - ret = intel_pcode_init(dev_priv);
> + ret = intel_pcode_init(&dev_priv->uncore);
> if (ret)
> return ret;
>
> diff --git a/drivers/gpu/drm/i915/intel_dram.c b/drivers/gpu/drm/i915/intel_dram.c
> index 2b9e7833da96..437447119770 100644
> --- a/drivers/gpu/drm/i915/intel_dram.c
> +++ b/drivers/gpu/drm/i915/intel_dram.c
> @@ -393,7 +393,7 @@ static int icl_pcode_read_mem_global_info(struct drm_i915_private *dev_priv)
> u32 val = 0;
> int ret;
>
> - ret = snb_pcode_read(dev_priv, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
> + ret = snb_pcode_read(&dev_priv->uncore, ICL_PCODE_MEM_SUBSYSYSTEM_INFO |
> ICL_PCODE_MEM_SS_READ_GLOBAL_INFO, &val, NULL);
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/i915/intel_pcode.c b/drivers/gpu/drm/i915/intel_pcode.c
> index ac727546868e..2be700932322 100644
> --- a/drivers/gpu/drm/i915/intel_pcode.c
> +++ b/drivers/gpu/drm/i915/intel_pcode.c
> @@ -52,14 +52,12 @@ static int gen7_check_mailbox_status(u32 mbox)
> }
> }
>
> -static int __snb_pcode_rw(struct drm_i915_private *i915, u32 mbox,
> +static int __snb_pcode_rw(struct intel_uncore *uncore, u32 mbox,
> u32 *val, u32 *val1,
> int fast_timeout_us, int slow_timeout_ms,
> bool is_read)
> {
> - struct intel_uncore *uncore = &i915->uncore;
Nitpick, personally, I would probably have just replaced the above with
struct drm_i915_private *i915 = uncore->i915;
to minimize the diff. Ditto everywhere. But not a big deal.
BR,
Jani.
> -
> - lockdep_assert_held(&i915->sb_lock);
> + lockdep_assert_held(&uncore->i915->sb_lock);
>
> /*
> * GEN6_PCODE_* are outside of the forcewake domain, we can use
> @@ -88,22 +86,22 @@ static int __snb_pcode_rw(struct drm_i915_private *i915, u32 mbox,
> if (is_read && val1)
> *val1 = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA1);
>
> - if (GRAPHICS_VER(i915) > 6)
> + if (GRAPHICS_VER(uncore->i915) > 6)
> return gen7_check_mailbox_status(mbox);
> else
> return gen6_check_mailbox_status(mbox);
> }
>
> -int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1)
> +int snb_pcode_read(struct intel_uncore *uncore, u32 mbox, u32 *val, u32 *val1)
> {
> int err;
>
> - mutex_lock(&i915->sb_lock);
> - err = __snb_pcode_rw(i915, mbox, val, val1, 500, 20, true);
> - mutex_unlock(&i915->sb_lock);
> + mutex_lock(&uncore->i915->sb_lock);
> + err = __snb_pcode_rw(uncore, mbox, val, val1, 500, 20, true);
> + mutex_unlock(&uncore->i915->sb_lock);
>
> if (err) {
> - drm_dbg(&i915->drm,
> + drm_dbg(&uncore->i915->drm,
> "warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n",
> mbox, __builtin_return_address(0), err);
> }
> @@ -111,18 +109,18 @@ int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1)
> return err;
> }
>
> -int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
> +int snb_pcode_write_timeout(struct intel_uncore *uncore, u32 mbox, u32 val,
> int fast_timeout_us, int slow_timeout_ms)
> {
> int err;
>
> - mutex_lock(&i915->sb_lock);
> - err = __snb_pcode_rw(i915, mbox, &val, NULL,
> + mutex_lock(&uncore->i915->sb_lock);
> + err = __snb_pcode_rw(uncore, mbox, &val, NULL,
> fast_timeout_us, slow_timeout_ms, false);
> - mutex_unlock(&i915->sb_lock);
> + mutex_unlock(&uncore->i915->sb_lock);
>
> if (err) {
> - drm_dbg(&i915->drm,
> + drm_dbg(&uncore->i915->drm,
> "warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n",
> val, mbox, __builtin_return_address(0), err);
> }
> @@ -130,18 +128,18 @@ int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
> return err;
> }
>
> -static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
> +static bool skl_pcode_try_request(struct intel_uncore *uncore, u32 mbox,
> u32 request, u32 reply_mask, u32 reply,
> u32 *status)
> {
> - *status = __snb_pcode_rw(i915, mbox, &request, NULL, 500, 0, true);
> + *status = __snb_pcode_rw(uncore, mbox, &request, NULL, 500, 0, true);
>
> return (*status == 0) && ((request & reply_mask) == reply);
> }
>
> /**
> * skl_pcode_request - send PCODE request until acknowledgment
> - * @i915: device private
> + * @uncore: uncore
> * @mbox: PCODE mailbox ID the request is targeted for
> * @request: request ID
> * @reply_mask: mask used to check for request acknowledgment
> @@ -158,16 +156,16 @@ static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox,
> * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some
> * other error as reported by PCODE.
> */
> -int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
> +int skl_pcode_request(struct intel_uncore *uncore, u32 mbox, u32 request,
> u32 reply_mask, u32 reply, int timeout_base_ms)
> {
> u32 status;
> int ret;
>
> - mutex_lock(&i915->sb_lock);
> + mutex_lock(&uncore->i915->sb_lock);
>
> #define COND \
> - skl_pcode_try_request(i915, mbox, request, reply_mask, reply, &status)
> + skl_pcode_try_request(uncore, mbox, request, reply_mask, reply, &status)
>
> /*
> * Prime the PCODE by doing a request first. Normally it guarantees
> @@ -193,35 +191,26 @@ int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
> * requests, and for any quirks of the PCODE firmware that delays
> * the request completion.
> */
> - drm_dbg_kms(&i915->drm,
> + drm_dbg_kms(&uncore->i915->drm,
> "PCODE timeout, retrying with preemption disabled\n");
> - drm_WARN_ON_ONCE(&i915->drm, timeout_base_ms > 3);
> + drm_WARN_ON_ONCE(&uncore->i915->drm, timeout_base_ms > 3);
> preempt_disable();
> ret = wait_for_atomic(COND, 50);
> preempt_enable();
>
> out:
> - mutex_unlock(&i915->sb_lock);
> + mutex_unlock(&uncore->i915->sb_lock);
> return status ? status : ret;
> #undef COND
> }
>
> -int intel_pcode_init(struct drm_i915_private *i915)
> +int intel_pcode_init(struct intel_uncore *uncore)
> {
> - int ret = 0;
> -
> - if (!IS_DGFX(i915))
> - return ret;
> -
> - ret = skl_pcode_request(i915, DG1_PCODE_STATUS,
> - DG1_UNCORE_GET_INIT_STATUS,
> - DG1_UNCORE_INIT_STATUS_COMPLETE,
> - DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
> -
> - drm_dbg(&i915->drm, "PCODE init status %d\n", ret);
> -
> - if (ret)
> - drm_err(&i915->drm, "Pcode did not report uncore initialization completion!\n");
> + if (!IS_DGFX(uncore->i915))
> + return 0;
>
> - return ret;
> + return skl_pcode_request(uncore, DG1_PCODE_STATUS,
> + DG1_UNCORE_GET_INIT_STATUS,
> + DG1_UNCORE_INIT_STATUS_COMPLETE,
> + DG1_UNCORE_INIT_STATUS_COMPLETE, 180000);
> }
> diff --git a/drivers/gpu/drm/i915/intel_pcode.h b/drivers/gpu/drm/i915/intel_pcode.h
> index 0962a17fac48..8f6241b114a5 100644
> --- a/drivers/gpu/drm/i915/intel_pcode.h
> +++ b/drivers/gpu/drm/i915/intel_pcode.h
> @@ -8,17 +8,17 @@
>
> #include <linux/types.h>
>
> -struct drm_i915_private;
> +struct intel_uncore;
>
> -int snb_pcode_read(struct drm_i915_private *i915, u32 mbox, u32 *val, u32 *val1);
> -int snb_pcode_write_timeout(struct drm_i915_private *i915, u32 mbox, u32 val,
> +int snb_pcode_read(struct intel_uncore *uncore, u32 mbox, u32 *val, u32 *val1);
> +int snb_pcode_write_timeout(struct intel_uncore *uncore, u32 mbox, u32 val,
> int fast_timeout_us, int slow_timeout_ms);
> -#define snb_pcode_write(i915, mbox, val) \
> - snb_pcode_write_timeout(i915, mbox, val, 500, 0)
> +#define snb_pcode_write(uncore, mbox, val) \
> + snb_pcode_write_timeout(uncore, mbox, val, 500, 0)
>
> -int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request,
> +int skl_pcode_request(struct intel_uncore *uncore, u32 mbox, u32 request,
> u32 reply_mask, u32 reply, int timeout_base_ms);
>
> -int intel_pcode_init(struct drm_i915_private *i915);
> +int intel_pcode_init(struct intel_uncore *uncore);
>
> #endif /* _INTEL_PCODE_H */
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index ee0047fdc95d..aacb21cbc62e 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -2874,7 +2874,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
>
> /* read the first set of memory latencies[0:3] */
> val = 0; /* data0 to be programmed to 0 for first set */
> - ret = snb_pcode_read(dev_priv, GEN9_PCODE_READ_MEM_LATENCY,
> + ret = snb_pcode_read(&dev_priv->uncore, GEN9_PCODE_READ_MEM_LATENCY,
> &val, NULL);
>
> if (ret) {
> @@ -2893,7 +2893,7 @@ static void intel_read_wm_latency(struct drm_i915_private *dev_priv,
>
> /* read the second set of memory latencies[4:7] */
> val = 1; /* data0 to be programmed to 1 for second set */
> - ret = snb_pcode_read(dev_priv, GEN9_PCODE_READ_MEM_LATENCY,
> + ret = snb_pcode_read(&dev_priv->uncore, GEN9_PCODE_READ_MEM_LATENCY,
> &val, NULL);
> if (ret) {
> drm_err(&dev_priv->drm,
> @@ -3679,7 +3679,7 @@ intel_sagv_block_time(struct drm_i915_private *dev_priv)
> u32 val = 0;
> int ret;
>
> - ret = snb_pcode_read(dev_priv,
> + ret = snb_pcode_read(&dev_priv->uncore,
> GEN12_PCODE_READ_SAGV_BLOCK_TIME_US,
> &val, NULL);
> if (ret) {
> @@ -3748,7 +3748,7 @@ static void skl_sagv_enable(struct drm_i915_private *dev_priv)
> return;
>
> drm_dbg_kms(&dev_priv->drm, "Enabling SAGV\n");
> - ret = snb_pcode_write(dev_priv, GEN9_PCODE_SAGV_CONTROL,
> + ret = snb_pcode_write(&dev_priv->uncore, GEN9_PCODE_SAGV_CONTROL,
> GEN9_SAGV_ENABLE);
>
> /* We don't need to wait for SAGV when enabling */
> @@ -3781,7 +3781,7 @@ static void skl_sagv_disable(struct drm_i915_private *dev_priv)
>
> drm_dbg_kms(&dev_priv->drm, "Disabling SAGV\n");
> /* bspec says to keep retrying for at least 1 ms */
> - ret = skl_pcode_request(dev_priv, GEN9_PCODE_SAGV_CONTROL,
> + ret = skl_pcode_request(&dev_priv->uncore, GEN9_PCODE_SAGV_CONTROL,
> GEN9_SAGV_DISABLE,
> GEN9_SAGV_IS_DISABLED, GEN9_SAGV_IS_DISABLED,
> 1);
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list