[Intel-gfx] [PATCH 1/2] drm/i915/reg: fix undefined behavior due to shift overflowing the constant

[Jani Nikula]

On Wed, 18 May 2022, Jani Nikula <jani.nikula at intel.com> wrote:
> On Wed, 18 May 2022, Ville Syrjälä <ville.syrjala at linux.intel.com> wrote:
>> On Wed, May 18, 2022 at 02:33:14PM +0300, Jani Nikula wrote:
>>> Use REG_GENMASK() and REG_FIELD_PREP() to avoid errors due to
>>> -fsanitize=shift.
>>
>> I presume it's just unhappy about shifting into the sign bit?
>
> Yeah, and apparently it also only happens on some GCC versions. *shrug*.
>
>>
>> Changes look correct:
>> Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Thanks,
> Jani.

And pushed 1/2 to drm-intel-next.

BR,
Jani.


>
>>
>>> 
>>> References: https://lore.kernel.org/r/20220405151517.29753-12-bp@alien8.de
>>> Reported-by: Borislav Petkov <bp at suse.de>
>>> Reported-by: Ruiqi GONG <gongruiqi1 at huawei.com>
>>> Cc: Randy Dunlap <rdunlap at infradead.org>
>>> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
>>> ---
>>>  drivers/gpu/drm/i915/i915_reg.h | 32 ++++++++++++++++----------------
>>>  1 file changed, 16 insertions(+), 16 deletions(-)
>>> 
>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>>> index 321a08281a3f..dff3f88d8090 100644
>>> --- a/drivers/gpu/drm/i915/i915_reg.h
>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>>> @@ -7607,25 +7607,25 @@ enum skl_power_gate {
>>>  #define _PORT_CLK_SEL_A			0x46100
>>>  #define _PORT_CLK_SEL_B			0x46104
>>>  #define PORT_CLK_SEL(port) _MMIO_PORT(port, _PORT_CLK_SEL_A, _PORT_CLK_SEL_B)
>>> -#define  PORT_CLK_SEL_LCPLL_2700	(0 << 29)
>>> -#define  PORT_CLK_SEL_LCPLL_1350	(1 << 29)
>>> -#define  PORT_CLK_SEL_LCPLL_810		(2 << 29)
>>> -#define  PORT_CLK_SEL_SPLL		(3 << 29)
>>> -#define  PORT_CLK_SEL_WRPLL(pll)	(((pll) + 4) << 29)
>>> -#define  PORT_CLK_SEL_WRPLL1		(4 << 29)
>>> -#define  PORT_CLK_SEL_WRPLL2		(5 << 29)
>>> -#define  PORT_CLK_SEL_NONE		(7 << 29)
>>> -#define  PORT_CLK_SEL_MASK		(7 << 29)
>>> +#define  PORT_CLK_SEL_MASK		REG_GENMASK(31, 29)
>>> +#define  PORT_CLK_SEL_LCPLL_2700	REG_FIELD_PREP(PORT_CLK_SEL_MASK, 0)
>>> +#define  PORT_CLK_SEL_LCPLL_1350	REG_FIELD_PREP(PORT_CLK_SEL_MASK, 1)
>>> +#define  PORT_CLK_SEL_LCPLL_810		REG_FIELD_PREP(PORT_CLK_SEL_MASK, 2)
>>> +#define  PORT_CLK_SEL_SPLL		REG_FIELD_PREP(PORT_CLK_SEL_MASK, 3)
>>> +#define  PORT_CLK_SEL_WRPLL(pll)	REG_FIELD_PREP(PORT_CLK_SEL_MASK, 4 + (pll))
>>> +#define  PORT_CLK_SEL_WRPLL1		REG_FIELD_PREP(PORT_CLK_SEL_MASK, 4)
>>> +#define  PORT_CLK_SEL_WRPLL2		REG_FIELD_PREP(PORT_CLK_SEL_MASK, 5)
>>> +#define  PORT_CLK_SEL_NONE		REG_FIELD_PREP(PORT_CLK_SEL_MASK, 7)
>>>  
>>>  /* On ICL+ this is the same as PORT_CLK_SEL, but all bits change. */
>>>  #define DDI_CLK_SEL(port)		PORT_CLK_SEL(port)
>>> -#define  DDI_CLK_SEL_NONE		(0x0 << 28)
>>> -#define  DDI_CLK_SEL_MG			(0x8 << 28)
>>> -#define  DDI_CLK_SEL_TBT_162		(0xC << 28)
>>> -#define  DDI_CLK_SEL_TBT_270		(0xD << 28)
>>> -#define  DDI_CLK_SEL_TBT_540		(0xE << 28)
>>> -#define  DDI_CLK_SEL_TBT_810		(0xF << 28)
>>> -#define  DDI_CLK_SEL_MASK		(0xF << 28)
>>> +#define  DDI_CLK_SEL_MASK		REG_GENMASK(31, 28)
>>> +#define  DDI_CLK_SEL_NONE		REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0x0)
>>> +#define  DDI_CLK_SEL_MG			REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0x8)
>>> +#define  DDI_CLK_SEL_TBT_162		REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xC)
>>> +#define  DDI_CLK_SEL_TBT_270		REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xD)
>>> +#define  DDI_CLK_SEL_TBT_540		REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xE)
>>> +#define  DDI_CLK_SEL_TBT_810		REG_FIELD_PREP(DDI_CLK_SEL_MASK, 0xF)
>>>  
>>>  /* Transcoder clock selection */
>>>  #define _TRANS_CLK_SEL_A		0x46140
>>> -- 
>>> 2.30.2

-- 
Jani Nikula, Intel Open Source Graphics Center