[Intel-gfx] [PATCH v2 1/1] drm/i915/tc: Don't default disconnected legacy Type-C ports to TBT mode (v2)

Andrzej Hajda andrzej.hajda at intel.com
Thu May 26 14:48:29 UTC 2022


On 26.05.2022 02:19, Vivek Kasireddy wrote:
> Commit 30e114ef4b16 ("drm/i915/tc: Check for DP-alt, legacy sinks before
> taking PHY ownership") defaults any disconnected Type-C ports to TBT-alt
> mode which presents a problem (which could most likely result in a system
> hang) when userspace forces a modeset on a Type-C port that is wired for
> legacy HDMI. The following warning is seen when Weston forces a modeset
> on a disconnected legacy Type-C port (HDMI) on a TGL based Gigabyte system:
> (https://www.gigabyte.com/Mini-PcBarebone/GB-BSi3-1115G4-rev-10#ov)
> 
> Missing case (clock == 173000)
> WARNING: CPU: 1 PID: 438 at drivers/gpu/drm/i915/display/intel_ddi.c:245
> icl_ddi_tc_enable_clock.cold+0x16a/0x1cf [i915]
> CPU: 1 PID: 438 Comm: kworker/u8:3 Tainted: G     U  W   E
> 5.18.0-rc5-drm-tip+ #20
> Hardware name: GIGABYTE GB-BSi3-1115G4/GB-BSi3-1115G4, BIOS F9
> 10/16/2021
> Workqueue: i915_modeset intel_atomic_commit_work [i915]
> RIP: 0010:icl_ddi_tc_enable_clock.cold+0x16a/0x1cf [i915]
> Code: 74 6c 7f 10 81 fd d0 78 02 00 74 6d 81 fd b0 1e 04 00 74 70 48 63
> d5 48 c7 c6 c0 7b ab c0 48 c7 c7 20 75 ab c0 e8 b8 b5 c1 f0 <0f> 0b 45
> 31 ed e9 fb fe ff ff 49 63 d5
>   48 c7 c6 80 7b ab c0 48 c7
> RSP: 0018:ffff8882522c78f0 EFLAGS: 00010282
> RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000
> RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed104a458f10
> RBP: 0000000000011558 R08: ffffffffb078de4e R09: ffff888269ca748b
> R10: ffffed104d394e91 R11: 0000000000000000 R12: ffff888255a318f8
> R13: 0000000000000002 R14: ffff888255a30000 R15: ffff88823ef00348
> FS:  0000000000000000(0000) GS:ffff888269c80000(0000)
> knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 00007fd7afa42000 CR3: 0000000255c02004 CR4: 00000000007706e0
> PKRU: 55555554
> Call Trace:
> <TASK>
> intel_ddi_pre_enable.cold+0x96/0x5bf [i915]
> intel_encoders_pre_enable+0x10e/0x140 [i915]
> hsw_crtc_enable+0x207/0x99d [i915]
> ? ilk_crtc_enable.cold+0x2a/0x2a [i915]
> ? prepare_to_wait_exclusive+0x120/0x120
> intel_enable_crtc+0x9a/0xf0 [i915]
> skl_commit_modeset_enables+0x466/0x820 [i915]
> ? intel_commit_modeset_enables+0xd0/0xd0 [i915]
> ? intel_mbus_dbox_update+0x1ed/0x250 [i915]
> intel_atomic_commit_tail+0xf2d/0x3040 [i915]
> _raw_spin_lock_irqsave+0x87/0xe0
> _raw_read_unlock_irqrestore+0x40/0x40
> __update_load_avg_cfs_rq+0x70/0x5c0
> __i915_sw_fence_complete+0x85/0x3b0 [i915]
> ? intel_get_crtc_new_encoder+0x190/0x190 [i915]
> ? sysvec_irq_work+0x13/0x90
> ? asm_sysvec_irq_work+0x12/0x20
> ? _raw_spin_lock_irq+0x82/0xd0
> ? read_word_at_a_time+0xe/0x20
> ? process_one_work+0x393/0x690
> process_one_work+0x393/0x690
> worker_thread+0x2b7/0x620
> ? process_one_work+0x690/0x690
> kthread+0x15a/0x190
> ? kthread_complete_and_exit+0x20/0x20
> ret_from_fork+0x1f/0x30
> 
> Continuing with the modeset without setting the DDI clock results in
> more warnings and eventually a system hang. This does not seem to
> happen with disconnected legacy or DP-alt DP ports because the clock
> rate defaults to 162000 (which is a valid TBT clock) during the link
> training process. Therefore, to fix this issue, this patch avoids
> setting disconnected Type-C legacy ports to TBT-alt mode which prevents
> the selection of TBT PLL when a modeset is forced.
> 
> v2: (Imre)
> - Retain the check for legacy hotplug live status to account for
> incorrect VBTs.
> 
> Cc: Imre Deak <imre.deak at intel.com>
> Cc: José Roberto de Souza <jose.souza at intel.com>
> Signed-off-by: Vivek Kasireddy <vivek.kasireddy at intel.com>

Looks sane.
Reviewed-by: Andrzej Hajda <andrzej.hajda at intel.com>

Regards
Andrzej


> ---
>   drivers/gpu/drm/i915/display/intel_tc.c | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
> index b8b822ea3755..6773840f6cc7 100644
> --- a/drivers/gpu/drm/i915/display/intel_tc.c
> +++ b/drivers/gpu/drm/i915/display/intel_tc.c
> @@ -494,7 +494,8 @@ static void icl_tc_phy_connect(struct intel_digital_port *dig_port,
>   	}
>   
>   	live_status_mask = tc_port_live_status_mask(dig_port);
> -	if (!(live_status_mask & (BIT(TC_PORT_DP_ALT) | BIT(TC_PORT_LEGACY)))) {
> +	if (!(live_status_mask & (BIT(TC_PORT_DP_ALT) | BIT(TC_PORT_LEGACY))) &&
> +	    !dig_port->tc_legacy_port) {
>   		drm_dbg_kms(&i915->drm, "Port %s: PHY ownership not required (live status %02x)\n",
>   			    dig_port->tc_port_name, live_status_mask);
>   		goto out_set_tbt_alt_mode;



More information about the Intel-gfx mailing list