[Intel-gfx] [PATCH 03/20] drm/i915/mtl: Create separate reg file for PICA registers
Jani Nikula
jani.nikula at linux.intel.com
Wed Nov 2 16:59:01 UTC 2022
On Wed, 02 Nov 2022, Jani Nikula <jani.nikula at linux.intel.com> wrote:
> On Fri, 14 Oct 2022, Mika Kahola <mika.kahola at intel.com> wrote:
>> Create a separate file to store registers for PICA chips
>> C10 and C20.
>>
>> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
>> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
>> ---
>> .../gpu/drm/i915/display/intel_cx0_reg_defs.h | 136 ++++++++++++++++++
>> 1 file changed, 136 insertions(+)
>> create mode 100644 drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h
>>
>> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h b/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h
>> new file mode 100644
>> index 000000000000..dfe156141d73
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h
>
> intel_cx0_regs.h not intel_cx0_reg_defs.h
I guess intel_cx0_phy_regs.h since you're adding intel_cx0_phy.c where
this is used.
But I'm confused as the next patch adds that. What's the difference
between the two?! And you're actually adding same stuff to both?
>
> See
>
> $ find drivers/gpu/drm/i915/ -name "*_regs.h"
>
>> @@ -0,0 +1,136 @@
>> +// SPDX-License-Identifier: MIT
>
> Wrap it in /* ... */ for .h files.
>
> It's a bit confusing, but .h and .c have different requirements.
>
>> +/*
>> + * Copyright © 2022 Intel Corporation
>> + */
>> +
>> +#ifndef __INTEL_CX0_REG_DEFS_H__
>> +#define __INTEL_CX0_REG_DEFS_H__
>> +
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A 0x64040
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B 0x64140
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1 0x16F240
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC2 0x16F440
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC3 0x16F640
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC4 0x16F840
>> +#define _XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) (_PICK(port, \
>> + [PORT_A] = _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A, \
>> + [PORT_B] = _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B, \
>> + [PORT_TC1] = _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1, \
>> + [PORT_TC2] = _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC2, \
>> + [PORT_TC3] = _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC3, \
>> + [PORT_TC4] = _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC4) + ((lane) * 4))
>> +
>> +#define XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) _MMIO(_XELPDP_PORT_M2P_MSGBUS_CTL(port, lane))
>> +#define XELPDP_PORT_M2P_TRANSACTION_PENDING REG_BIT(31)
>> +#define XELPDP_PORT_M2P_COMMAND_TYPE_MASK REG_GENMASK(30, 27)
>> +#define XELPDP_PORT_M2P_COMMAND_WRITE_UNCOMMITTED REG_FIELD_PREP(XELPDP_PORT_M2P_COMMAND_TYPE_MASK, 0x1)
>> +#define XELPDP_PORT_M2P_COMMAND_WRITE_COMMITTED REG_FIELD_PREP(XELPDP_PORT_M2P_COMMAND_TYPE_MASK, 0x2)
>> +#define XELPDP_PORT_M2P_COMMAND_READ REG_FIELD_PREP(XELPDP_PORT_M2P_COMMAND_TYPE_MASK, 0x3)
>> +#define XELPDP_PORT_M2P_DATA_MASK REG_GENMASK(23, 16)
>> +#define XELPDP_PORT_M2P_DATA(val) REG_FIELD_PREP(XELPDP_PORT_M2P_DATA_MASK, val)
>> +#define XELPDP_PORT_M2P_TRANSACTION_RESET REG_BIT(15)
>> +#define XELPDP_PORT_M2P_ADDRESS_MASK REG_GENMASK(11, 0)
>> +#define XELPDP_PORT_M2P_ADDRESS(val) REG_FIELD_PREP(XELPDP_PORT_M2P_ADDRESS_MASK, val)
>> +
>> +#define XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane) _MMIO(_XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) + 8)
>> +#define XELPDP_PORT_P2M_RESPONSE_READY REG_BIT(31)
>> +#define XELPDP_PORT_P2M_COMMAND_TYPE_MASK REG_GENMASK(30, 27)
>> +#define XELPDP_PORT_P2M_COMMAND_READ_ACK 0x4
>> +#define XELPDP_PORT_P2M_COMMAND_WRITE_ACK 0x5
>> +#define XELPDP_PORT_P2M_DATA_MASK REG_GENMASK(23, 16)
>> +#define XELPDP_PORT_P2M_DATA(val) REG_FIELD_PREP(XELPDP_PORT_P2M_DATA_MASK, val)
>> +#define XELPDP_PORT_P2M_ERROR_SET REG_BIT(15)
>> +
>> +#define XELPDP_MSGBUS_TIMEOUT_SLOW 1
>> +#define XELPDP_MSGBUS_TIMEOUT_FAST_US 2
>> +#define XELPDP_PCLK_PLL_ENABLE_TIMEOUT_US 3200
>> +#define XELPDP_PCLK_PLL_DISABLE_TIMEOUT_US 20
>> +#define XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US 100
>> +#define XELPDP_PORT_RESET_START_TIMEOUT_US 5
>> +#define XELPDP_PORT_POWERDOWN_UPDATE_TIMEOUT_US 100
>> +#define XELPDP_PORT_RESET_END_TIMEOUT 15
>> +#define XELPDP_REFCLK_ENABLE_TIMEOUT_US 1
>> +
>> +#define _XELPDP_PORT_BUF_CTL1_LN0_A 0x64004
>> +#define _XELPDP_PORT_BUF_CTL1_LN0_B 0x64104
>> +#define _XELPDP_PORT_BUF_CTL1_LN0_USBC1 0x16F200
>> +#define _XELPDP_PORT_BUF_CTL1_LN0_USBC2 0x16F400
>> +#define _XELPDP_PORT_BUF_CTL1_LN0_USBC3 0x16F600
>> +#define _XELPDP_PORT_BUF_CTL1_LN0_USBC4 0x16F800
>> +#define _XELPDP_PORT_BUF_CTL1(port) (_PICK(port, \
>> + [PORT_A] = _XELPDP_PORT_BUF_CTL1_LN0_A, \
>> + [PORT_B] = _XELPDP_PORT_BUF_CTL1_LN0_B, \
>> + [PORT_TC1] = _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
>> + [PORT_TC2] = _XELPDP_PORT_BUF_CTL1_LN0_USBC2, \
>> + [PORT_TC3] = _XELPDP_PORT_BUF_CTL1_LN0_USBC3, \
>> + [PORT_TC4] = _XELPDP_PORT_BUF_CTL1_LN0_USBC4))
>> +
>> +#define XELPDP_PORT_BUF_CTL1(port) _MMIO(_XELPDP_PORT_BUF_CTL1(port))
>> +#define XELPDP_PORT_BUF_SOC_PHY_READY REG_BIT(24)
>> +#define XELPDP_PORT_REVERSAL REG_BIT(16)
>> +
>> +#define XELPDP_TC_PHY_OWNERSHIP REG_BIT(6)
>> +#define XELPDP_TCSS_POWER_REQUEST REG_BIT(5)
>> +#define XELPDP_TCSS_POWER_STATE REG_BIT(4)
>> +#define XELPDP_PORT_WIDTH_MASK REG_GENMASK(3, 1)
>> +#define XELPDP_PORT_WIDTH(val) REG_FIELD_PREP(XELPDP_PORT_WIDTH_MASK, val)
>> +
>> +#define XELPDP_PORT_BUF_CTL2(port) _MMIO(_XELPDP_PORT_BUF_CTL1(port) + 4)
>> +#define XELPDP_LANE0_PIPE_RESET REG_BIT(31)
>> +#define XELPDP_LANE1_PIPE_RESET REG_BIT(30)
>> +#define XELPDP_LANE0_PHY_CURRENT_STATUS REG_BIT(29)
>> +#define XELPDP_LANE1_PHY_CURRENT_STATUS REG_BIT(28)
>> +#define XELPDP_LANE0_POWERDOWN_UPDATE REG_BIT(25)
>> +#define XELPDP_LANE1_POWERDOWN_UPDATE REG_BIT(24)
>> +#define XELPDP_LANE0_POWERDOWN_NEW_STATE_MASK REG_GENMASK(23, 20)
>> +#define XELPDP_LANE0_POWERDOWN_NEW_STATE(val) REG_FIELD_PREP(XELPDP_LANE0_POWERDOWN_NEW_STATE_MASK, val)
>> +#define XELPDP_LANE1_POWERDOWN_NEW_STATE_MASK REG_GENMASK(19, 16)
>> +#define XELPDP_LANE1_POWERDOWN_NEW_STATE(val) REG_FIELD_PREP(XELPDP_LANE1_POWERDOWN_NEW_STATE_MASK, val)
>> +#define XELPDP_POWER_STATE_READY_MASK REG_GENMASK(7, 4)
>> +#define XELPDP_POWER_STATE_READY(val) REG_FIELD_PREP(XELPDP_POWER_STATE_READY_MASK, val)
>> +
>> +#define XELPDP_PORT_BUF_CTL3(port) _MMIO(_XELPDP_PORT_BUF_CTL1(port) + 8)
>> +#define XELPDP_PLL_LANE_STAGGERING_DELAY_MASK REG_GENMASK(15, 8)
>> +#define XELPDP_PLL_LANE_STAGGERING_DELAY(val) REG_FIELD_PREP(XELPDP_PLL_LANE_STAGGERING_DELAY_MASK, val)
>> +#define XELPDP_POWER_STATE_ACTIVE_MASK REG_GENMASK(3, 0)
>> +#define XELPDP_POWER_STATE_ACTIVE(val) REG_FIELD_PREP(XELPDP_POWER_STATE_ACTIVE_MASK, val)
>> +
>> +#define _XELPDP_PORT_CLOCK_CTL_A 0x640E0
>> +#define _XELPDP_PORT_CLOCK_CTL_B 0x641E0
>> +#define _XELPDP_PORT_CLOCK_CTL_USBC1 0x16F260
>> +#define _XELPDP_PORT_CLOCK_CTL_USBC2 0x16F460
>> +#define _XELPDP_PORT_CLOCK_CTL_USBC3 0x16F660
>> +#define _XELPDP_PORT_CLOCK_CTL_USBC4 0x16F860
>> +#define XELPDP_PORT_CLOCK_CTL(port) _MMIO(_PICK(port, \
>> + [PORT_A] = _XELPDP_PORT_CLOCK_CTL_A, \
>> + [PORT_B] = _XELPDP_PORT_CLOCK_CTL_B, \
>> + [PORT_TC1] = _XELPDP_PORT_CLOCK_CTL_USBC1, \
>> + [PORT_TC2] = _XELPDP_PORT_CLOCK_CTL_USBC2, \
>> + [PORT_TC3] = _XELPDP_PORT_CLOCK_CTL_USBC3, \
>> + [PORT_TC4] = _XELPDP_PORT_CLOCK_CTL_USBC4))
>> +
>> +#define XELPDP_LANE0_PCLK_PLL_REQUEST REG_BIT(31)
>> +#define XELPDP_LANE0_PCLK_PLL_ACK REG_BIT(30)
>> +#define XELPDP_LANE0_PCLK_REFCLK_REQUEST REG_BIT(29)
>> +#define XELPDP_LANE0_PCLK_REFCLK_ACK REG_BIT(28)
>> +#define XELPDP_LANE1_PCLK_PLL_REQUEST REG_BIT(27)
>> +#define XELPDP_LANE1_PCLK_PLL_ACK REG_BIT(26)
>> +#define XELPDP_LANE1_PCLK_REFCLK_REQUEST REG_BIT(25)
>> +#define XELPDP_LANE1_PCLK_REFCLK_ACK REG_BIT(24)
>> +#define XELPDP_TBT_CLOCK_REQUEST REG_BIT(19)
>> +#define XELPDP_TBT_CLOCK_ACK REG_BIT(18)
>> +#define XELPDP_DDI_CLOCK_SELECT_MASK REG_GENMASK(15, 12)
>> +#define XELPDP_DDI_CLOCK_SELECT(val) REG_FIELD_PREP(XELPDP_DDI_CLOCK_SELECT_MASK, val)
>> +#define XELPDP_DDI_CLOCK_SELECT_NONE 0x0
>> +#define XELPDP_DDI_CLOCK_SELECT_MAXPCLK 0x8
>> +#define XELPDP_DDI_CLOCK_SELECT_DIV18CLK 0x9
>> +#define XELPDP_DDI_CLOCK_SELECT_TBT_162 0xc
>> +#define XELPDP_DDI_CLOCK_SELECT_TBT_270 0xd
>> +#define XELPDP_DDI_CLOCK_SELECT_TBT_540 0xe
>> +#define XELPDP_DDI_CLOCK_SELECT_TBT_810 0xf
>> +#define XELPDP_FORWARD_CLOCK_UNGATE REG_BIT(10)
>> +#define XELPDP_LANE1_PHY_CLOCK_SELECT REG_BIT(8)
>> +#define XELPDP_SSC_ENABLE_PLLA REG_BIT(1)
>> +#define XELPDP_SSC_ENABLE_PLLB REG_BIT(0)
>> +
>> +#endif /* __INTEL_CX0_REG_DEFS_H__ */
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list