[Intel-gfx] [PATCH 1/9] drm/i915: Use kmap_local_page() in gem/i915_gem_object.c

[Ira Weiny]

On Sat, Oct 29, 2022 at 01:17:03PM +0200, Fabio M. De Francesco wrote:
> On lunedì 17 ottobre 2022 11:37:17 CEST Zhao Liu wrote:
> > From: Zhao Liu <zhao1.liu at intel.com>
> > 
> > The use of kmap_atomic() is being deprecated in favor of
> > kmap_local_page()[1].
> > 
> > The main difference between atomic and local mappings is that local
> > mappings doesn't disable page faults or preemption.
> 
> You are right about about page faults which are never disabled by 
> kmap_local_page(). However kmap_atomic might not disable preemption. It 
> depends on CONFIG_PREEMPT_RT.
> 
> Please refer to how kmap_atomic_prot() works (this function is called by 
> kmap_atomic() when kernels have HIGHMEM enabled).
> 
> > 
> > There're 2 reasons why i915_gem_object_read_from_page_kmap() doesn't
> > need to disable pagefaults and preemption for mapping:
> > 
> > 1. The flush operation is safe for CPU hotplug when preemption is not
> > disabled. 
> 
> I'm confused here. Why are you talking about CPU hotplug?

I agree with Fabio here.  I'm not making the connection between cpu hotplug and
this code path.

Ira

> In any case, developers should never rely on implicit calls of 
> preempt_disable() for the reasons said above. Therefore, flush operations 
> should be allowed regardless that kmap_atomic() potential side effect.
> 
> > In drm/i915/gem/i915_gem_object.c, the function
> > i915_gem_object_read_from_page_kmap() calls drm_clflush_virt_range()
> 
> If I recall correctly, drm_clflush_virt_range() can always be called with page 
> faults and preemption enabled. If so, this is enough to say that the 
> conversion is safe. 
> 
> Is this code explicitly related to flushing the cache lines before removing / 
> adding CPUs? If I recall correctly, there are several other reasons behind the 
> need to issue cache lines flushes. Am I wrong about this?
> 
> Can you please say more about what I'm missing here?
> 
> > to
> > use CLFLUSHOPT or WBINVD to flush. Since CLFLUSHOPT is global on x86
> > and WBINVD is called on each cpu in drm_clflush_virt_range(), the flush
> > operation is global and any issue with cpu's being added or removed
> > can be handled safely.
> 
> Again your main concern is about CPU hotplug.
> 
> Even if I'm missing something, do we really need all these details about the 
> inner workings of drm_clflush_virt_range()? 
> 
> I'm not an expert, so may be that I'm wrong about all I wrote above.
> 
> Therefore, can you please elaborate a little more for readers with very little 
> knowledge of these kinds of things (like me and perhaps others)?
>  
> > 2. Any context switch caused by preemption or sleep (pagefault may
> > cause sleep) doesn't affect the validity of local mapping.
> 
> I'd replace "preemption or sleep" with "preemption and page faults" since 
> yourself then added that page faults lead to tasks being put to sleep.  
> 
> > Therefore, i915_gem_object_read_from_page_kmap() is a function where
> > the use of kmap_local_page() in place of kmap_atomic() is correctly
> > suited.
> > 
> > Convert the calls of kmap_atomic() / kunmap_atomic() to
> > kmap_local_page() / kunmap_local().
> > 
> > And remove the redundant variable that stores the address of the mapped
> > page since kunmap_local() can accept any pointer within the page.
> > 
> > [1]: https://lore.kernel.org/all/20220813220034.806698-1-ira.weiny@intel.com
> > 
> > Suggested-by: Dave Hansen <dave.hansen at intel.com>
> > Suggested-by: Ira Weiny <ira.weiny at intel.com>
> > Suggested-by: Fabio M. De Francesco <fmdefrancesco at gmail.com>
> > Signed-off-by: Zhao Liu <zhao1.liu at intel.com>
> > ---
> > Suggested by credits:
> >   Dave: Referred to his explanation about cache flush.
> >   Ira: Referred to his task document, review comments and explanation about
> >        cache flush.
> >   Fabio: Referred to his boiler plate commit message.
> > ---
> >  drivers/gpu/drm/i915/gem/i915_gem_object.c | 8 +++-----
> >  1 file changed, 3 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/gem/i915_gem_object.c
> > b/drivers/gpu/drm/i915/gem/i915_gem_object.c index 
> 369006c5317f..a0072abed75e 100644
> > --- a/drivers/gpu/drm/i915/gem/i915_gem_object.c
> > +++ b/drivers/gpu/drm/i915/gem/i915_gem_object.c
> > @@ -413,17 +413,15 @@ void __i915_gem_object_invalidate_frontbuffer(struct
> > drm_i915_gem_object *obj, static void
> >  i915_gem_object_read_from_page_kmap(struct drm_i915_gem_object *obj, u64 
> offset, void
> > *dst, int size) {
> > -	void *src_map;
> >  	void *src_ptr;
> > 
> > -	src_map = kmap_atomic(i915_gem_object_get_page(obj, offset >> 
> PAGE_SHIFT));
> > -
> > -	src_ptr = src_map + offset_in_page(offset);
> > +	src_ptr = kmap_local_page(i915_gem_object_get_page(obj, offset >> 
> PAGE_SHIFT))
> > +	          + offset_in_page(offset);
> >  	if (!(obj->cache_coherent & I915_BO_CACHE_COHERENT_FOR_READ))
> >  		drm_clflush_virt_range(src_ptr, size);
> >  	memcpy(dst, src_ptr, size);
> > 
> > -	kunmap_atomic(src_map);
> > +	kunmap_local(src_ptr);
> >  }
> > 
> >  static void
> 
> The changes look good, but I'd like to better understand the commit message.
> 
> Thanks,
> 
> Fabio 
> 
>