[Intel-gfx] [PATCH] drm/i915/selftest: Bump up sample period for busy stats selftest

Dixit, Ashutosh ashutosh.dixit at intel.com
Thu Nov 3 17:01:11 UTC 2022


On Wed, 02 Nov 2022 17:11:49 -0700, Umesh Nerlige Ramappa wrote:
>
> Engine busyness samples around a 10ms period is failing with busyness
> ranging approx. from 87% to 115%. The expected range is +/- 5% of the
> sample period.
>
> When determining busyness of active engine, the GuC based engine
> busyness implementation relies on a 64 bit timestamp register read. The
> latency incurred by this register read causes the failure.
>
> On DG1, when the test fails, the observed latencies range from 900us -
> 1.5ms.
>
> One solution tried was to reduce the latency between reg read and
> CPU timestamp capture, but such optimization does not add value to user
> since the CPU timestamp obtained here is only used for (1) selftest and
> (2) i915 rps implementation specific to execlist scheduler. Also, this
> solution only reduces the frequency of failure and does not eliminate
> it.
>
> In order to make the selftest more robust and account for such
> latencies, increase the sample period to 100 ms.

Does it make sense, and also by way of documenting, to use 10 ms for
execlists and 100 ms for GuC? Maybe a comment in the code would be nice
too. Thanks.

>
> Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa at intel.com>
> ---
>  drivers/gpu/drm/i915/gt/selftest_engine_pm.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/selftest_engine_pm.c b/drivers/gpu/drm/i915/gt/selftest_engine_pm.c
> index 0dcb3ed44a73..87c94314cf67 100644
> --- a/drivers/gpu/drm/i915/gt/selftest_engine_pm.c
> +++ b/drivers/gpu/drm/i915/gt/selftest_engine_pm.c
> @@ -317,7 +317,7 @@ static int live_engine_busy_stats(void *arg)
>		ENGINE_TRACE(engine, "measuring busy time\n");
>		preempt_disable();
>		de = intel_engine_get_busy_time(engine, &t[0]);
> -		mdelay(10);
> +		mdelay(100);
>		de = ktime_sub(intel_engine_get_busy_time(engine, &t[1]), de);
>		preempt_enable();
>		dt = ktime_sub(t[1], t[0]);
> --
> 2.36.1
>


More information about the Intel-gfx mailing list