[Intel-gfx] [PATCH v2 7/9] drm/i915: Factor out function to get/put AUX_IO power for main link

Imre Deak imre.deak at intel.com
Mon Nov 7 17:09:15 UTC 2022


Factor out functions to get/put the AUX_IO power domain for the main
link on DDI ports.

While at it clarify the corresponding code comment.

No functional change.

v2:
- s/(get/put)_aux_power_for_main_link/main_link_aux_power_domain_(get/put)
  (Jani)
- Clarify in the code comment that AUX_IO is needed only by TypeC besides
  eDP/PSR.

Cc: Jani Nikula <jani.nikula at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 84 ++++++++++++++----------
 1 file changed, 49 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index d2953bf503765..b1f9bb45d90a2 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -850,23 +850,59 @@ intel_ddi_main_link_aux_domain(struct intel_digital_port *dig_port,
 			       const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
 
-	/* ICL+ HW requires corresponding AUX IOs to be powered up for PSR with
+	/*
+	 * ICL+ HW requires corresponding AUX IOs to be powered up for PSR with
 	 * DC states enabled at the same time, while for driver initiated AUX
 	 * transfers we need the same AUX IOs to be powered but with DC states
-	 * disabled. Accordingly use the AUX power domain here which leaves DC
-	 * states enabled.
-	 * However, for non-A AUX ports the corresponding non-EDP transcoders
-	 * would have already enabled power well 2 and DC_OFF. This means we can
-	 * acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a
-	 * specific AUX_IO reference without powering up any extra wells.
-	 * Note that PSR is enabled only on Port A even though this function
-	 * returns the correct domain for other ports too.
+	 * disabled. Accordingly use the AUX_IO_<port> power domain here which
+	 * leaves DC states enabled.
+	 *
+	 * Before MTL TypeC PHYs (in all TypeC modes and both DP/HDMI) also require
+	 * AUX IO to be enabled, but all these require DC_OFF to be enabled as
+	 * well, so we can acquire a wider AUX_<port> power domain reference
+	 * instead of a specific AUX_IO_<port> reference without powering up any
+	 * extra wells.
 	 */
 	if (crtc_state->has_psr)
 		return intel_display_power_aux_io_domain(i915, dig_port->aux_ch);
-	else
+	else if (intel_crtc_has_dp_encoder(crtc_state) ||
+		 intel_phy_is_tc(i915, phy))
 		return intel_aux_power_domain(dig_port);
+	else
+		return POWER_DOMAIN_INVALID;
+}
+
+static void
+main_link_aux_power_domain_get(struct intel_digital_port *dig_port,
+			       const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	enum intel_display_power_domain domain =
+		intel_ddi_main_link_aux_domain(dig_port, crtc_state);
+
+	drm_WARN_ON(&i915->drm, dig_port->aux_wakeref);
+
+	if (domain == POWER_DOMAIN_INVALID)
+		return;
+
+	dig_port->aux_wakeref = intel_display_power_get(i915, domain);
+}
+
+static void
+main_link_aux_power_domain_put(struct intel_digital_port *dig_port,
+			       const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+	intel_wakeref_t wf = fetch_and_zero(&dig_port->aux_wakeref);
+	enum intel_display_power_domain domain =
+		intel_ddi_main_link_aux_domain(dig_port, crtc_state);
+
+	if (!wf)
+		return;
+
+	intel_display_power_put(i915, domain, wf);
 }
 
 static void intel_ddi_get_power_domains(struct intel_encoder *encoder,
@@ -874,7 +910,6 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder,
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port;
-	enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
 
 	/*
 	 * TODO: Add support for MST encoders. Atm, the following should never
@@ -893,18 +928,7 @@ static void intel_ddi_get_power_domains(struct intel_encoder *encoder,
 								   dig_port->ddi_io_power_domain);
 	}
 
-	/*
-	 * AUX power is only needed for (e)DP mode, and for HDMI mode on TC
-	 * ports.
-	 */
-	if (intel_crtc_has_dp_encoder(crtc_state) ||
-	    intel_phy_is_tc(dev_priv, phy)) {
-		drm_WARN_ON(&dev_priv->drm, dig_port->aux_wakeref);
-		dig_port->aux_wakeref =
-			intel_display_power_get(dev_priv,
-						intel_ddi_main_link_aux_domain(dig_port,
-									       crtc_state));
-	}
+	main_link_aux_power_domain_get(dig_port, crtc_state);
 }
 
 void intel_ddi_enable_pipe_clock(struct intel_encoder *encoder,
@@ -2743,11 +2767,7 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
 		intel_ddi_post_disable_dp(state, encoder, old_crtc_state,
 					  old_conn_state);
 
-	if (intel_crtc_has_dp_encoder(old_crtc_state) || is_tc_port)
-		intel_display_power_put(dev_priv,
-					intel_ddi_main_link_aux_domain(dig_port,
-								       old_crtc_state),
-					fetch_and_zero(&dig_port->aux_wakeref));
+	main_link_aux_power_domain_put(dig_port, old_crtc_state);
 
 	if (is_tc_port)
 		intel_tc_port_put_link(dig_port);
@@ -3068,13 +3088,7 @@ intel_ddi_pre_pll_enable(struct intel_atomic_state *state,
 	if (is_tc_port)
 		intel_tc_port_get_link(dig_port, crtc_state->lane_count);
 
-	if (intel_crtc_has_dp_encoder(crtc_state) || is_tc_port) {
-		drm_WARN_ON(&dev_priv->drm, dig_port->aux_wakeref);
-		dig_port->aux_wakeref =
-			intel_display_power_get(dev_priv,
-						intel_ddi_main_link_aux_domain(dig_port,
-									       crtc_state));
-	}
+	main_link_aux_power_domain_get(dig_port, crtc_state);
 
 	if (is_tc_port && !intel_tc_port_in_tbt_alt_mode(dig_port))
 		/*
-- 
2.37.1



More information about the Intel-gfx mailing list