[Intel-gfx] [PATCH v2] mei: add timeout to send
Alexander Usyskin
alexander.usyskin at intel.com
Tue Nov 15 11:14:38 UTC 2022
When driver wakes up the firmware from the low power state, it is sending
a memory ready message.
The send is done via synchronous/blocking function to ensure that firmware
is in ready state. However, in case of firmware undergoing reset send
might be block forever.
To address this issue a timeout is added to blocking write command on
the internal bus.
Introduce the __mei_cl_send_timeout function to use instead of
__mei_cl_send in cases where timeout is required.
The mei_cl_write has only two callers and there is no need to split
it into two functions.
Signed-off-by: Alexander Usyskin <alexander.usyskin at intel.com>
---
V2: address review comments:
- split __mei_cl_send and __mei_cl_send_timeout
- add units to timeout KDoc
- use MAX_SCHEDULE_TIMEOUT to squash wait to one macro
drivers/misc/mei/bus-fixup.c | 14 +++++++++-----
drivers/misc/mei/bus.c | 22 ++++++++++++++++++++--
drivers/misc/mei/client.c | 18 ++++++++++++++----
drivers/misc/mei/client.h | 2 +-
drivers/misc/mei/main.c | 2 +-
drivers/misc/mei/mei_dev.h | 2 ++
6 files changed, 47 insertions(+), 13 deletions(-)
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 71fbf0bc8453..9959b8e8e91d 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -188,17 +188,20 @@ static int mei_fwver(struct mei_cl_device *cldev)
return ret;
}
+#define GFX_MEMORY_READY_TIMEOUT 200
+
static int mei_gfx_memory_ready(struct mei_cl_device *cldev)
{
struct mkhi_gfx_mem_ready req = {0};
- unsigned int mode = MEI_CL_IO_TX_INTERNAL;
+ unsigned int mode = MEI_CL_IO_TX_INTERNAL | MEI_CL_IO_TX_BLOCKING;
req.hdr.group_id = MKHI_GROUP_ID_GFX;
req.hdr.command = MKHI_GFX_MEMORY_READY_CMD_REQ;
req.flags = MKHI_GFX_MEM_READY_PXP_ALLOWED;
dev_dbg(&cldev->dev, "Sending memory ready command\n");
- return __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req), 0, mode);
+ return __mei_cl_send_timeout(cldev->cl, (u8 *)&req, sizeof(req), 0,
+ mode, GFX_MEMORY_READY_TIMEOUT);
}
static void mei_mkhi_fix(struct mei_cl_device *cldev)
@@ -263,12 +266,13 @@ static void mei_gsc_mkhi_fix_ver(struct mei_cl_device *cldev)
if (cldev->bus->pxp_mode == MEI_DEV_PXP_INIT) {
ret = mei_gfx_memory_ready(cldev);
- if (ret < 0)
+ if (ret < 0) {
dev_err(&cldev->dev, "memory ready command failed %d\n", ret);
- else
+ } else {
dev_dbg(&cldev->dev, "memory ready command sent\n");
+ cldev->bus->pxp_mode = MEI_DEV_PXP_SETUP;
+ }
/* we go to reset after that */
- cldev->bus->pxp_mode = MEI_DEV_PXP_SETUP;
goto out;
}
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 1fbe127ff633..63043e8df980 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -32,8 +32,26 @@
*
* Return: written size bytes or < 0 on error
*/
-ssize_t __mei_cl_send(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag,
+inline ssize_t __mei_cl_send(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag,
unsigned int mode)
+{
+ return __mei_cl_send_timeout(cl, buf, length, vtag, mode, MAX_SCHEDULE_TIMEOUT);
+}
+
+/**
+ * __mei_cl_send_timeout - internal client send (write)
+ *
+ * @cl: host client
+ * @buf: buffer to send
+ * @length: buffer length
+ * @vtag: virtual tag
+ * @mode: sending mode
+ * @timeout: send timeout in milliseconds for blocking writes
+ *
+ * Return: written size bytes or < 0 on error
+ */
+ssize_t __mei_cl_send_timeout(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag,
+ unsigned int mode, unsigned long timeout)
{
struct mei_device *bus;
struct mei_cl_cb *cb;
@@ -108,7 +126,7 @@ ssize_t __mei_cl_send(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag,
cb->buf.size = 0;
}
- rets = mei_cl_write(cl, cb);
+ rets = mei_cl_write(cl, cb, timeout);
if (mode & MEI_CL_IO_SGL && rets == 0)
rets = length;
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index 6c8b71ae32c8..02c278202ad7 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -1954,10 +1954,11 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
*
* @cl: host client
* @cb: write callback with filled data
+ * @timeout: send timeout in milliseconds for blocking writes
*
* Return: number of bytes sent on success, <0 on failure.
*/
-ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
+ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, unsigned long timeout)
{
struct mei_device *dev;
struct mei_msg_data *buf;
@@ -2081,11 +2082,20 @@ ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb)
if (blocking && cl->writing_state != MEI_WRITE_COMPLETE) {
mutex_unlock(&dev->device_lock);
- rets = wait_event_interruptible(cl->tx_wait,
- cl->writing_state == MEI_WRITE_COMPLETE ||
- (!mei_cl_is_connected(cl)));
+ rets = wait_event_interruptible_timeout(cl->tx_wait,
+ cl->writing_state == MEI_WRITE_COMPLETE ||
+ (!mei_cl_is_connected(cl)),
+ msecs_to_jiffies(timeout));
mutex_lock(&dev->device_lock);
+ /* clean all queue on timeout as something fatal happened */
+ if (rets == 0) {
+ rets = -ETIME;
+ mei_io_tx_list_free_cl(&dev->write_list, cl, NULL);
+ mei_io_tx_list_free_cl(&dev->write_waiting_list, cl, NULL);
+ }
/* wait_event_interruptible returns -ERESTARTSYS */
+ if (rets > 0)
+ rets = 0;
if (rets) {
if (signal_pending(current))
rets = -EINTR;
diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h
index 418056fb1489..9052860bcfe0 100644
--- a/drivers/misc/mei/client.h
+++ b/drivers/misc/mei/client.h
@@ -246,7 +246,7 @@ int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl,
int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb,
struct list_head *cmpl_list);
int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp);
-ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb);
+ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, unsigned long timeout);
int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb,
struct list_head *cmpl_list);
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 930887e7e38d..632d4ae21e46 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -383,7 +383,7 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf,
goto out;
}
- rets = mei_cl_write(cl, cb);
+ rets = mei_cl_write(cl, cb, MAX_SCHEDULE_TIMEOUT);
out:
mutex_unlock(&dev->device_lock);
return rets;
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 8d8018428d9d..996b70a988be 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -379,6 +379,8 @@ void mei_cl_bus_rescan_work(struct work_struct *work);
void mei_cl_bus_dev_fixup(struct mei_cl_device *dev);
ssize_t __mei_cl_send(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag,
unsigned int mode);
+ssize_t __mei_cl_send_timeout(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag,
+ unsigned int mode, unsigned long timeout);
ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length, u8 *vtag,
unsigned int mode, unsigned long timeout);
bool mei_cl_bus_rx_event(struct mei_cl *cl);
--
2.34.1
More information about the Intel-gfx
mailing list