[Intel-gfx] [PATCH 1/2] drm/i915/display: Do both crawl and squash when changing cdclk
Srivatsa, Anusha
anusha.srivatsa at intel.com
Fri Oct 28 21:27:52 UTC 2022
> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Sent: Friday, October 28, 2022 2:05 AM
> To: Srivatsa, Anusha <anusha.srivatsa at intel.com>
> Cc: intel-gfx at lists.freedesktop.org; Vivekanandan, Balasubramani
> <balasubramani.vivekanandan at intel.com>
> Subject: Re: [PATCH 1/2] drm/i915/display: Do both crawl and squash when
> changing cdclk
>
> On Wed, Oct 26, 2022 at 04:22:56PM -0700, Anusha Srivatsa wrote:
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > For MTL, changing cdclk from between certain frequencies has both
> > squash and crawl. Use the current cdclk config and the new(desired)
> > cdclk config to construtc a mid cdclk config.
> > Set the cdclk twice:
> > - Current cdclk -> mid cdclk
> > - mid cdclk -> desired cdclk
> >
> > v2: Add check in intel_modeset_calc_cdclk() to avoid cdclk change via
> > modeset for platforms that support squash_crawl sequences(Ville)
> >
> > v3: Add checks for:
> > - scenario where only slow clock is used and cdclk is actually 0
> > (bringing up display).
> > - PLLs are on before looking up the waveform.
> > - Squash and crawl capability checks.(Ville)
> >
> > v4: Rebase
> > - Move checks to be more consistent (Ville)
> > - Add comments (Bala)
> >
> > Cc: Balasubramani Vivekanandan
> <balasubramani.vivekanandan at intel.com>
> > Signed-off-by: Anusha Srivatsa <anusha.srivatsa at intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_cdclk.c | 157
> > +++++++++++++++++----
> > 1 file changed, 129 insertions(+), 28 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c
> > b/drivers/gpu/drm/i915/display/intel_cdclk.c
> > index eada931cb1c8..6a775367f02a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cdclk.c
> > +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
> > @@ -1716,37 +1716,74 @@ static void dg2_cdclk_squash_program(struct
> drm_i915_private *i915,
> > intel_de_write(i915, CDCLK_SQUASH_CTL, squash_ctl); }
> >
> > -static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > - const struct intel_cdclk_config *cdclk_config,
> > - enum pipe pipe)
> > +static int cdclk_squash_divider(u16 waveform) {
> > + return hweight16(waveform ?: 0xffff); }
> > +
> > +static bool cdclk_crawl_and_squash(struct drm_i915_private *i915,
> > + const struct intel_cdclk_config
> *old_cdclk_config,
> > + const struct intel_cdclk_config
> *new_cdclk_config,
> > + struct intel_cdclk_config *mid_cdclk_config)
> {
> > + u16 old_waveform, new_waveform, mid_waveform;
> > + int size = 16;
> > + int div = 2;
> > +
> > + /* Return if both Squash and Crawl are not present */
> > + if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
> > + return false;
> > +
> > + /* Return if Squash only or Crawl only is the desired action */
> > + if (old_cdclk_config->vco <= 0 || new_cdclk_config->vco <= 0 ||
> > + old_cdclk_config->vco == new_cdclk_config->vco ||
> > + old_waveform == new_waveform)
>
> Those are not yet initialized.
*facepalm*
> > + return false;
> > +
> > + old_waveform = cdclk_squash_waveform(i915, old_cdclk_config-
> >cdclk);
> > + new_waveform = cdclk_squash_waveform(i915, new_cdclk_config-
> >cdclk);
> > +
> > + *mid_cdclk_config = *new_cdclk_config;
> > +
> > + /* Populate the mid_cdclk_config accordingly.
> > + * - If moving to a higher cdclk, the desired action is squashing.
> > + * The mid cdclk config should have the new (squash) waveform.
> > + * - If moving to a lower cdclk, the desired action is crawling.
> > + * The mid cdclk config should have the new vco.
> > + */
> > +
> > + if (cdclk_squash_divider(new_waveform) >
> cdclk_squash_divider(old_waveform)) {
> > + mid_cdclk_config->vco = old_cdclk_config->vco;
> > + mid_waveform = new_waveform;
> > + } else {
> > + mid_cdclk_config->vco = new_cdclk_config->vco;
> > + mid_waveform = old_waveform;
> > + }
> > +
> > + mid_cdclk_config->cdclk =
> DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
> > + mid_cdclk_config->vco, size
> * div);
> > +
> > + /* make sure the mid clock came out sane */
> > +
> > + drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
> > + min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
> > + drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
> > + i915->display.cdclk.max_cdclk_freq);
> > + drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915,
> mid_cdclk_config->cdclk) !=
> > + mid_waveform);
> > +
> > + return true;
> > +}
> > +
> > +static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > + const struct intel_cdclk_config *cdclk_config,
> > + enum pipe pipe)
> > {
> > int cdclk = cdclk_config->cdclk;
> > int vco = cdclk_config->vco;
> > u32 val;
> > u16 waveform;
> > int clock;
> > - int ret;
> > -
> > - /* Inform power controller of upcoming frequency change. */
> > - if (DISPLAY_VER(dev_priv) >= 11)
> > - ret = skl_pcode_request(&dev_priv->uncore,
> SKL_PCODE_CDCLK_CONTROL,
> > - SKL_CDCLK_PREPARE_FOR_CHANGE,
> > - SKL_CDCLK_READY_FOR_CHANGE,
> > - SKL_CDCLK_READY_FOR_CHANGE, 3);
> > - else
> > - /*
> > - * BSpec requires us to wait up to 150usec, but that leads to
> > - * timeouts; the 2ms used here is based on experiment.
> > - */
> > - ret = snb_pcode_write_timeout(&dev_priv->uncore,
> > -
> HSW_PCODE_DE_WRITE_FREQ_REQ,
> > - 0x80000000, 150, 2);
> > - if (ret) {
> > - drm_err(&dev_priv->drm,
> > - "Failed to inform PCU about cdclk change (err %d,
> freq %d)\n",
> > - ret, cdclk);
> > - return;
> > - }
> >
> > if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco
> > 0 && vco > 0) {
> > if (dev_priv->display.cdclk.hw.vco != vco) @@ -1781,6
> +1818,44 @@
> > static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> >
> > if (pipe != INVALID_PIPE)
> >
> intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv,
> > pipe));
> > +}
> > +
> > +static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
> > + const struct intel_cdclk_config *cdclk_config,
> > + enum pipe pipe)
> > +{
> > + struct intel_cdclk_config mid_cdclk_config;
> > + int cdclk = cdclk_config->cdclk;
> > + int ret;
> > +
> > + /* Inform power controller of upcoming frequency change. */
> > + if (DISPLAY_VER(dev_priv) >= 11)
> > + ret = skl_pcode_request(&dev_priv->uncore,
> SKL_PCODE_CDCLK_CONTROL,
> > + SKL_CDCLK_PREPARE_FOR_CHANGE,
> > + SKL_CDCLK_READY_FOR_CHANGE,
> > + SKL_CDCLK_READY_FOR_CHANGE, 3);
> > + else
> > + /*
> > + * BSpec requires us to wait up to 150usec, but that leads to
> > + * timeouts; the 2ms used here is based on experiment.
> > + */
> > + ret = snb_pcode_write_timeout(&dev_priv->uncore,
> > +
> HSW_PCODE_DE_WRITE_FREQ_REQ,
> > + 0x80000000, 150, 2);
> > + if (ret) {
> > + drm_err(&dev_priv->drm,
> > + "Failed to inform PCU about cdclk change (err %d,
> freq %d)\n",
> > + ret, cdclk);
> > + return;
> > + }
> > +
> > + if (cdclk_crawl_and_squash(dev_priv, &dev_priv->display.cdclk.hw,
> > + cdclk_config, &mid_cdclk_config)) {
> > + _bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
> > + _bxt_set_cdclk(dev_priv, cdclk_config, pipe);
> > + } else {
> > + _bxt_set_cdclk(dev_priv, cdclk_config, pipe);
> > + }
> >
> > if (DISPLAY_VER(dev_priv) >= 11) {
> > ret = snb_pcode_write(&dev_priv->uncore,
> SKL_PCODE_CDCLK_CONTROL,
> > @@ -1953,6 +2028,27 @@ void intel_cdclk_uninit_hw(struct
> drm_i915_private *i915)
> > skl_cdclk_uninit_hw(i915);
> > }
> >
> > +static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private
> *i915,
> > + const struct intel_cdclk_config *a,
> > + const struct intel_cdclk_config *b) {
> > + u16 old_waveform;
> > + u16 new_waveform;
> > +
> > + if (a->vco == 0 || b->vco == 0)
> > + return false;
> > +
> > + if (HAS_CDCLK_CRAWL(i915) && HAS_CDCLK_SQUASH(i915)) {
> > + old_waveform = cdclk_squash_waveform(i915, a->cdclk);
> > + new_waveform = cdclk_squash_waveform(i915, b->cdclk);
> > + } else {
> > + return false;
> > + }
>
> Still weird.
Agreed. Changing this.
Anusha
> > +
> > + return a->vco != b->vco &&
> > + old_waveform != new_waveform; }
> > +
> > static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
> > const struct intel_cdclk_config *a,
> > const struct intel_cdclk_config *b) @@ -
> 2759,9 +2855,14 @@ int
> > intel_modeset_calc_cdclk(struct intel_atomic_state *state)
> > pipe = INVALID_PIPE;
> > }
> >
> > - if (intel_cdclk_can_squash(dev_priv,
> > - &old_cdclk_state->actual,
> > - &new_cdclk_state->actual)) {
> > + if (intel_cdclk_can_crawl_and_squash(dev_priv,
> > + &old_cdclk_state->actual,
> > + &new_cdclk_state->actual)) {
> > + drm_dbg_kms(&dev_priv->drm,
> > + "Can change cdclk via crawling and squashing\n");
> > + } else if (intel_cdclk_can_squash(dev_priv,
> > + &old_cdclk_state->actual,
> > + &new_cdclk_state->actual)) {
> > drm_dbg_kms(&dev_priv->drm,
> > "Can change cdclk via squashing\n");
> > } else if (intel_cdclk_can_crawl(dev_priv,
> > --
> > 2.25.1
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list