[Intel-gfx] [PATCH 06/20] drm/i915/mtl: Add vswing programming for C10 phys

Taylor, Clinton A clinton.a.taylor at intel.com
Mon Oct 31 20:29:01 UTC 2022


to fix the FIXME in intel_cx0_phy_set_signal_levels() we need the following patch snipet to be incorporated into this patch.


@@ -331,18 +331,14 @@ void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
            }
      }

-     intel_cx0_write(i915, encoder->port, master_lane, PHY_C10_VDR_CONTROL(1),
-                 C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG,
+     intel_cx0_write(i915, encoder->port, !master_lane, PHY_C10_VDR_CONTROL(1),
+                 C10_VDR_CTRL_MSGBUS_ACCESS | C10_VDR_CTRL_UPDATE_CFG,
                  MB_WRITE_COMMITTED);
-#if 0
-     /*
-      * FIXME: Revisit this code to see why we can't update
-      * config on Lane 1
-      */
-     intel_cx0_rmw(i915, encoder->port, !master_lane, PHY_C10_VDR_CONTROL(1),
-                 C10_VDR_CTRL_MSGBUS_ACCESS | C10_VDR_CTRL_UPDATE_CFG, C10_VDR_CTRL_UPDATE_CFG,
+
+     intel_cx0_write(i915, encoder->port, master_lane, PHY_C10_VDR_CONTROL(1),
+                 C10_VDR_CTRL_MSGBUS_ACCESS | C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG,
                  MB_WRITE_COMMITTED);
-#endif
+
      intel_cx0_phy_transaction_end(encoder, wakeref);
 }

Sorry for the top post - webmail
-Clint

________________________________
From: Kahola, Mika <mika.kahola at intel.com>
Sent: Friday, October 14, 2022 5:47 AM
To: intel-gfx at lists.freedesktop.org <intel-gfx at lists.freedesktop.org>
Cc: Kahola, Mika <mika.kahola at intel.com>; Sripada, Radhakrishna <radhakrishna.sripada at intel.com>; Deak, Imre <imre.deak at intel.com>; Shankar, Uma <uma.shankar at intel.com>; Taylor, Clinton A <clinton.a.taylor at intel.com>
Subject: [PATCH 06/20] drm/i915/mtl: Add vswing programming for C10 phys

From: Radhakrishna Sripada <radhakrishna.sripada at intel.com>

C10 phys uses direct mapping internally for voltage and pre-emphasis levels.
Program the levels directly to the fields in the VDR Registers.

Bspec: 65449

Cc: Imre Deak <imre.deak at intel.com>
Cc: Uma Shankar <uma.shankar at intel.com>
Signed-off-by: Clint Taylor <Clinton.A.Taylor at intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
Signed-off-by: Mika Kahola <mika.kahola at intel.com>
---
 drivers/gpu/drm/i915/display/intel_cx0_phy.c  | 143 ++++++++++++++++--
 drivers/gpu/drm/i915/display/intel_cx0_phy.h  |   2 +
 .../gpu/drm/i915/display/intel_cx0_reg_defs.h |   6 +
 drivers/gpu/drm/i915/display/intel_ddi.c      |   4 +-
 .../drm/i915/display/intel_ddi_buf_trans.c    |  36 ++++-
 .../drm/i915/display/intel_ddi_buf_trans.h    |   6 +
 .../i915/display/intel_display_power_map.c    |   1 +
 7 files changed, 185 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index dc033174c9c0..ef874986940d 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -6,10 +6,14 @@
 #include "i915_reg_defs.h"
 #include "intel_cx0_phy.h"
 #include "intel_cx0_reg_defs.h"
+#include "intel_ddi.h"
+#include "intel_ddi_buf_trans.h"
 #include "intel_de.h"
 #include "intel_display_types.h"
 #include "intel_dp.h"
 #include "intel_panel.h"
+#include "intel_psr.h"
+#include "intel_uncore.h"

 bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy)
 {
@@ -19,6 +23,15 @@ bool intel_is_c10phy(struct drm_i915_private *dev_priv, enum phy phy)
         return false;
 }

+static void
+assert_dc_off(struct drm_i915_private *i915)
+{
+       bool enabled;
+
+       enabled = intel_display_power_is_enabled(i915, POWER_DOMAIN_DC_OFF);
+       drm_WARN_ON(&i915->drm, !enabled);
+}
+
 static void intel_cx0_bus_reset(struct drm_i915_private *i915, enum port port, int lane)
 {
         enum phy phy = intel_port_to_phy(i915, port);
@@ -108,6 +121,8 @@ static u8 intel_cx0_read(struct drm_i915_private *i915, enum port port,
         int i, status;
         u32 val;

+       assert_dc_off(i915);
+
         for (i = 0; i < 3; i++) {
                 status = __intel_cx0_read(i915, port, lane, addr, &val);

@@ -191,6 +206,8 @@ static void __intel_cx0_write(struct drm_i915_private *i915, enum port port,
         enum phy phy = intel_port_to_phy(i915, port);
         int i, status;

+       assert_dc_off(i915);
+
         for (i = 0; i < 3; i++) {
                 status = __intel_cx0_write_once(i915, port, lane, addr, data, committed);

@@ -240,6 +257,84 @@ static void intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
         }
 }

+/*
+ * Prepare HW for CX0 phy transactions.
+ *
+ * It is required that PSR and DC5/6 are disabled before any CX0 message
+ * bus transaction is executed.
+ */
+static intel_wakeref_t intel_cx0_phy_transaction_begin(struct intel_encoder *encoder)
+{
+       struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+       struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+       intel_psr_pause(intel_dp);
+       return intel_display_power_get(i915, POWER_DOMAIN_DC_OFF);
+}
+
+static void intel_cx0_phy_transaction_end(struct intel_encoder *encoder, intel_wakeref_t wakeref)
+{
+       struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+       struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+
+       intel_psr_resume(intel_dp);
+       intel_display_power_put(i915, POWER_DOMAIN_DC_OFF, wakeref);
+}
+
+void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
+                                    const struct intel_crtc_state *crtc_state)
+{
+       struct drm_i915_private *i915 = to_i915(encoder->base.dev);
+       struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
+       bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+       u8 master_lane = lane_reversal ? INTEL_CX0_LANE1 :
+                                        INTEL_CX0_LANE0;
+       const struct intel_ddi_buf_trans *trans;
+       intel_wakeref_t wakeref;
+       int n_entries, ln;
+
+       wakeref = intel_cx0_phy_transaction_begin(encoder);
+
+       trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries);
+       if (drm_WARN_ON_ONCE(&i915->drm, !trans))
+               return;
+
+       intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
+                     0, C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);
+
+       for (ln = 0; ln < 4; ln++) {
+               int level = intel_ddi_level(encoder, crtc_state, ln);
+               int lane, tx;
+
+               lane = ln / 2;
+               tx = ln % 2 + 1;
+
+               intel_cx0_rmw(i915, encoder->port, lane, PHY_CX0_TX_CONTROL(tx, 2),
+                             C10_PHY_VSWING_PREEMPH_MASK,
+                             C10_PHY_VSWING_PREEMPH(trans->entries[level].direct.preemph),
+                             MB_WRITE_COMMITTED);
+               intel_cx0_rmw(i915, encoder->port, lane, PHY_CX0_TX_CONTROL(tx, 8),
+                             C10_PHY_VSWING_LEVEL_MASK,
+                             C10_PHY_VSWING_LEVEL(trans->entries[level].direct.level),
+                             MB_WRITE_COMMITTED);
+       }
+
+       intel_cx0_write(i915, encoder->port, master_lane, PHY_C10_VDR_CONTROL(1),
+                       C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG,
+                       MB_WRITE_COMMITTED);
+#if 0
+       /*
+        * FIXME: Revisit this code to see why we can't update
+        * config on Lane 1
+        */
+       intel_cx0_rmw(i915, encoder->port, !master_lane, PHY_C10_VDR_CONTROL(1),
+                       C10_VDR_CTRL_MSGBUS_ACCESS | C10_VDR_CTRL_UPDATE_CFG, C10_VDR_CTRL_UPDATE_CFG,
+                       MB_WRITE_COMMITTED);
+#endif
+
+       intel_cx0_phy_transaction_end(encoder, wakeref);
+}
+
 /*
  * Basic DP link rates with 38.4 MHz reference clock.
  * Note: The tables below are with SSC. In non-ssc
@@ -698,9 +793,12 @@ void intel_c10mpllb_readout_hw_state(struct intel_encoder *encoder,
         u8 lane = lane_reversal ? INTEL_CX0_LANE1 :
                                   INTEL_CX0_LANE0;
         enum phy phy = intel_port_to_phy(i915, encoder->port);
+       intel_wakeref_t wakeref;
         int i;
         u8 cmn, tx0;

+       wakeref = intel_cx0_phy_transaction_begin(encoder);
+
         /*
          * According to C10 VDR Register programming Sequence we need
          * to do this to read PHY internal registers from MsgBus.
@@ -719,6 +817,8 @@ void intel_c10mpllb_readout_hw_state(struct intel_encoder *encoder,
                                           C10_CMN0_DP_VAL : C10_CMN0_HDMI_VAL))
                 drm_warn(&i915->drm, "Unexpected tx: %x or cmn: %x for phy: %c.\n",
                          tx0, cmn, phy_name(phy));
+
+       intel_cx0_phy_transaction_end(encoder, wakeref);
 }

 static void intel_c10_pll_program(struct drm_i915_private *i915,
@@ -849,17 +949,20 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,

         if (intel_crtc_has_dp_encoder(crtc_state)) {
                 intel_dp = enc_to_intel_dp(encoder);
-               ssc_enabled = intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
-                             DP_MAX_DOWNSPREAD_0_5;
+               ssc_enabled = (intel_dp->dpcd[DP_MAX_DOWNSPREAD] &
+                             DP_MAX_DOWNSPREAD_0_5);
+
+               if (intel_dp_is_edp(intel_dp) && !intel_panel_use_ssc(i915))
+                       ssc_enabled = false;

                 /* TODO: DP2.0 10G and 20G rates enable MPLLA*/
                 val |= ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
         }
+
         intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
-                    XELPDP_LANE1_PHY_CLOCK_SELECT |
-                    XELPDP_FORWARD_CLOCK_UNGATE |
+                    XELPDP_LANE1_PHY_CLOCK_SELECT | XELPDP_FORWARD_CLOCK_UNGATE |
                      XELPDP_DDI_CLOCK_SELECT_MASK |
-                    XELPDP_SSC_ENABLE_PLLB, val);
+                    XELPDP_SSC_ENABLE_PLLA | XELPDP_SSC_ENABLE_PLLB, val);
 }

 static u32 intel_cx0_get_powerdown_update(u8 lane)
@@ -986,9 +1089,12 @@ static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
 {
         u8 l0t1, l0t2, l1t1, l1t2;

-       intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
-                     C10_VDR_CTRL_MSGBUS_ACCESS, C10_VDR_CTRL_MSGBUS_ACCESS,
-                     MB_WRITE_COMMITTED);
+       intel_cx0_rmw(i915, port, 1, PHY_C10_VDR_CONTROL(1),
+                     C10_VDR_CTRL_MSGBUS_ACCESS | C10_VDR_CTRL_UPDATE_CFG,
+                     C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);
+       intel_cx0_rmw(i915, port, 0, PHY_C10_VDR_CONTROL(1),
+                     C10_VDR_CTRL_MSGBUS_ACCESS | C10_VDR_CTRL_UPDATE_CFG,
+                     C10_VDR_CTRL_MASTER_LANE  | C10_VDR_CTRL_MSGBUS_ACCESS, MB_WRITE_COMMITTED);

         l0t1 = intel_cx0_read(i915, port, 0, PHY_CX0_TX_CONTROL(1, 2));
         l0t2 = intel_cx0_read(i915, port, 0, PHY_CX0_TX_CONTROL(2, 2));
@@ -1039,8 +1145,12 @@ static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
                 }
         }

-       intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
-                     C10_VDR_CTRL_UPDATE_CFG, C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED);
+       intel_cx0_rmw(i915, port, 1, PHY_C10_VDR_CONTROL(1),
+                     C10_VDR_CTRL_UPDATE_CFG | C10_VDR_CTRL_MSGBUS_ACCESS,
+                     C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED);
+       intel_cx0_rmw(i915, port, 0, PHY_C10_VDR_CONTROL(1),
+                     C10_VDR_CTRL_UPDATE_CFG | C10_VDR_CTRL_MSGBUS_ACCESS,
+                     C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG, MB_WRITE_COMMITTED);
 }

 static u32 intel_cx0_get_pclk_pll_request(u8 lane)
@@ -1138,9 +1248,14 @@ void intel_cx0pll_enable(struct intel_encoder *encoder,
 {
         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
         enum phy phy = intel_port_to_phy(i915, encoder->port);
+       intel_wakeref_t wakeref;
+
+       wakeref = intel_cx0_phy_transaction_begin(encoder);

         drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
         intel_c10pll_enable(encoder, crtc_state);
+
+       intel_cx0_phy_transaction_end(encoder, wakeref);
 }

 static void intel_c10pll_disable(struct intel_encoder *encoder)
@@ -1185,7 +1300,8 @@ static void intel_c10pll_disable(struct intel_encoder *encoder)

         /* 7. Program PORT_CLOCK_CTL register to disable and gate clocks. */
         intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
-                    XELPDP_DDI_CLOCK_SELECT_MASK |
+                    XELPDP_DDI_CLOCK_SELECT_MASK, 0);
+       intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
                      XELPDP_FORWARD_CLOCK_UNGATE, 0);
 }

@@ -1193,9 +1309,14 @@ void intel_cx0pll_disable(struct intel_encoder *encoder)
 {
         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
         enum phy phy = intel_port_to_phy(i915, encoder->port);
+       intel_wakeref_t wakeref;
+
+       wakeref = intel_cx0_phy_transaction_begin(encoder);

         drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
         intel_c10pll_disable(encoder);
+
+       intel_cx0_phy_transaction_end(encoder, wakeref);
 }

 void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.h b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
index f8023f240727..952c7deeffaa 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
@@ -40,5 +40,7 @@ int intel_c10mpllb_calc_port_clock(struct intel_encoder *encoder,
 void intel_c10mpllb_state_verify(struct intel_atomic_state *state,
                                  struct intel_crtc_state *new_crtc_state);
 int intel_c10_phy_check_hdmi_link_rate(int clock);
+void intel_cx0_phy_set_signal_levels(struct intel_encoder *encoder,
+                                    const struct intel_crtc_state *crtc_state);

 #endif /* __INTEL_CX0_PHY_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h b/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h
index b394f5c23acb..fad6308bbf77 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_reg_defs.h
@@ -164,4 +164,10 @@
 #define PHY_CX0_TX_CONTROL(tx, control) (0x400 + ((tx) - 1) * 0x200 + (control))
 #define CONTROL2_DISABLE_SINGLE_TX      REG_BIT(6)

+/* C10 Phy VSWING Masks */
+#define C10_PHY_VSWING_LEVEL_MASK               REG_GENMASK8(2, 0)
+#define C10_PHY_VSWING_LEVEL(val)               REG_FIELD_PREP8(C10_PHY_VSWING_LEVEL_MASK, val)
+#define C10_PHY_VSWING_PREEMPH_MASK             REG_GENMASK8(1, 0)
+#define C10_PHY_VSWING_PREEMPH(val)             REG_FIELD_PREP8(C10_PHY_VSWING_PREEMPH_MASK, val)
+
 #endif /* __INTEL_CX0_REG_DEFS_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 639ec604babf..1380ed2221ad 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -4445,7 +4445,9 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
                 encoder->get_config = hsw_ddi_get_config;
         }

-       if (IS_DG2(dev_priv)) {
+       if (DISPLAY_VER(dev_priv) >= 14) {
+               encoder->set_signal_levels = intel_cx0_phy_set_signal_levels;
+       } else if (IS_DG2(dev_priv)) {
                 encoder->set_signal_levels = intel_snps_phy_set_signal_levels;
         } else if (DISPLAY_VER(dev_priv) >= 12) {
                 if (intel_phy_is_combo(dev_priv, phy))
diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
index 006a2e979000..49f8a0a6593b 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.c
@@ -1035,6 +1035,30 @@ static const struct intel_ddi_buf_trans dg2_snps_trans_uhbr = {
         .num_entries = ARRAY_SIZE(_dg2_snps_trans_uhbr),
 };

+/*
+ * Some platforms don't need a mapping table and only expect us to
+ * to program the vswing + preemphasis levels directly since the
+ * hardware will do its own mapping to tuning values internally.
+ */
+static const union intel_ddi_buf_trans_entry direct_map_trans[] = {
+    { .direct = { .level = 0, .preemph = 0 } },
+    { .direct = { .level = 0, .preemph = 1 } },
+    { .direct = { .level = 0, .preemph = 2 } },
+    { .direct = { .level = 0, .preemph = 3 } },
+    { .direct = { .level = 1, .preemph = 0 } },
+    { .direct = { .level = 1, .preemph = 0 } },
+    { .direct = { .level = 1, .preemph = 2 } },
+    { .direct = { .level = 2, .preemph = 0 } },
+    { .direct = { .level = 2, .preemph = 1 } },
+    { .direct = { .level = 3, .preemph = 0 } },
+};
+
+static const struct intel_ddi_buf_trans mtl_cx0c10_trans = {
+       .entries = direct_map_trans,
+       .num_entries = ARRAY_SIZE(direct_map_trans),
+       .hdmi_default_entry = ARRAY_SIZE(direct_map_trans) - 1,
+};
+
 bool is_hobl_buf_trans(const struct intel_ddi_buf_trans *table)
 {
         return table == &tgl_combo_phy_trans_edp_hbr2_hobl;
@@ -1606,12 +1630,22 @@ dg2_get_snps_buf_trans(struct intel_encoder *encoder,
                 return intel_get_buf_trans(&dg2_snps_trans, n_entries);
 }

+static const struct intel_ddi_buf_trans *
+mtl_get_cx0_buf_trans(struct intel_encoder *encoder,
+                     const struct intel_crtc_state *crtc_state,
+                     int *n_entries)
+{
+       return intel_get_buf_trans(&mtl_cx0c10_trans, n_entries);
+}
+
 void intel_ddi_buf_trans_init(struct intel_encoder *encoder)
 {
         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
         enum phy phy = intel_port_to_phy(i915, encoder->port);

-       if (IS_DG2(i915)) {
+       if (DISPLAY_VER(i915) >= 14) {
+               encoder->get_buf_trans = mtl_get_cx0_buf_trans;
+       } else if (IS_DG2(i915)) {
                 encoder->get_buf_trans = dg2_get_snps_buf_trans;
         } else if (IS_ALDERLAKE_P(i915)) {
                 if (intel_phy_is_combo(i915, phy))
diff --git a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
index 2133984a572b..e4a857b9829d 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
+++ b/drivers/gpu/drm/i915/display/intel_ddi_buf_trans.h
@@ -51,6 +51,11 @@ struct dg2_snps_phy_buf_trans {
         u8 post_cursor;
 };

+struct direct_phy_buf_trans {
+       u8 level;
+       u8 preemph;
+};
+
 union intel_ddi_buf_trans_entry {
         struct hsw_ddi_buf_trans hsw;
         struct bxt_ddi_buf_trans bxt;
@@ -58,6 +63,7 @@ union intel_ddi_buf_trans_entry {
         struct icl_mg_phy_ddi_buf_trans mg;
         struct tgl_dkl_phy_ddi_buf_trans dkl;
         struct dg2_snps_phy_buf_trans snps;
+       struct direct_phy_buf_trans direct;
 };

 struct intel_ddi_buf_trans {
diff --git a/drivers/gpu/drm/i915/display/intel_display_power_map.c b/drivers/gpu/drm/i915/display/intel_display_power_map.c
index dc04afc6cc8f..45c3ab4e2f28 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power_map.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power_map.c
@@ -1374,6 +1374,7 @@ I915_DECL_PW_DOMAINS(xelpdp_pwdoms_dc_off,
         XELPDP_PW_2_POWER_DOMAINS,
         POWER_DOMAIN_AUDIO_MMIO,
         POWER_DOMAIN_MODESET,
+       POWER_DOMAIN_DC_OFF,
         POWER_DOMAIN_AUX_A,
         POWER_DOMAIN_AUX_B,
         POWER_DOMAIN_INIT);
--
2.34.1

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/intel-gfx/attachments/20221031/211e3840/attachment-0001.htm>


More information about the Intel-gfx mailing list