[Intel-gfx] [PATCH v3 01/15] vfio: Add helpers for unifying vfio_device life cycle
Tian, Kevin
kevin.tian at intel.com
Fri Sep 9 08:42:25 UTC 2022
> From: Ethan Zhao <haifeng.zhao at linux.intel.com>
> Sent: Friday, September 9, 2022 4:24 PM
>
> Hi, Kevin,
>
> 在 2022/9/9 18:22, Kevin Tian 写道:
> > The idea is to let vfio core manage the vfio_device life cycle instead
> > of duplicating the logic cross drivers. This is also a preparatory
> > step for adding struct device into vfio_device.
> >
> > New pair of helpers together with a kref in vfio_device:
> >
> > - vfio_alloc_device()
> > - vfio_put_device()
>
> To be honest, this pair of functions make me confusing to understand their
>
> behaviour from wording point of view:
>
> - vfio_alloc_device(), Okay, it allocates the vfio device, no reference
> count thing. but,
I think it's quite common to have an alloc() helper initialize refcount, e.g.
vfio_group_alloc() both initialize its user refcount and also call
device_initialize() to gets kref initialized. Similar example in
ib_alloc_device(), etc.
> - vfio_put_device()
> seems it will decrease reference count and then if it is zero, free it.
> so they are not of one *pair* about wording.
>
> How about
>
> - vfio_alloc_device() / - vfio_free_device()
> or
> - vfio_get_device() / - vfio_put_device(), perhaps not match their behviour
> in following code.
>
>
>
> Thanks,
> Ethan
>
>
> >
> > Drivers can register @init/@release callbacks to manage any private
> > state wrapping the vfio_device.
> >
> > However vfio-ccw doesn't fit this model due to a life cycle mess
> > that its private structure mixes both parent and mdev info hence must
> > be allocated/freed outside of the life cycle of vfio device.
> >
> > Per prior discussions this won't be fixed in short term by IBM folks.
> >
> > Instead of waiting for those modifications introduce another helper
> > vfio_init_device() so ccw can call it to initialize a pre-allocated
> > vfio_device.
> >
> > Further implication of the ccw trick is that vfio_device cannot be
> > freed uniformly in vfio core. Instead, require *EVERY* driver to
> > implement @release and free vfio_device inside. Then ccw can choose
> > to delay the free at its own discretion.
> >
> > Another trick down the road is that kvzalloc() is used to accommodate
> > the need of gvt which uses vzalloc() while all others use kzalloc().
> > So drivers should call a helper vfio_free_device() to free the
> > vfio_device instead of assuming that kfree() or vfree() is appliable.
> >
> > Later once the ccw mess is fixed we can remove those tricks and
> > fully handle structure alloc/free in vfio core.
> >
> > Existing vfio_{un}init_group_dev() will be deprecated after all
> > existing usages are converted to the new model.
> >
> > Suggested-by: Jason Gunthorpe <jgg at nvidia.com>
> > Co-developed-by: Yi Liu <yi.l.liu at intel.com>
> > Signed-off-by: Yi Liu <yi.l.liu at intel.com>
> > Signed-off-by: Kevin Tian <kevin.tian at intel.com>
> > Reviewed-by: Tony Krowiak <akrowiak at linux.ibm.com>
> > Reviewed-by: Jason Gunthorpe <jgg at nvidia.com>
> > Reviewed-by: Eric Auger <eric.auger at redhat.com>
> > ---
> > drivers/vfio/vfio_main.c | 92
> ++++++++++++++++++++++++++++++++++++++++
> > include/linux/vfio.h | 25 ++++++++++-
> > 2 files changed, 116 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/vfio/vfio_main.c b/drivers/vfio/vfio_main.c
> > index 27d9186f35d5..adc1b697bb78 100644
> > --- a/drivers/vfio/vfio_main.c
> > +++ b/drivers/vfio/vfio_main.c
> > @@ -498,6 +498,98 @@ void vfio_uninit_group_dev(struct vfio_device
> *device)
> > }
> > EXPORT_SYMBOL_GPL(vfio_uninit_group_dev);
> >
> > +/* Release helper called by vfio_put_device() */
> > +void vfio_device_release(struct kref *kref)
> > +{
> > + struct vfio_device *device =
> > + container_of(kref, struct vfio_device, kref);
> > +
> > + vfio_uninit_group_dev(device);
> > +
> > + /*
> > + * kvfree() cannot be done here due to a life cycle mess in
> > + * vfio-ccw. Before the ccw part is fixed all drivers are
> > + * required to support @release and call vfio_free_device()
> > + * from there.
> > + */
> > + device->ops->release(device);
> > +}
> > +EXPORT_SYMBOL_GPL(vfio_device_release);
> > +
> > +/*
> > + * Alloc and initialize vfio_device so it can be registered to vfio
> > + * core.
> > + *
> > + * Drivers should use the wrapper vfio_alloc_device() for allocation.
> > + * @size is the size of the structure to be allocated, including any
> > + * private data used by the driver.
> > + *
> > + * Driver may provide an @init callback to cover device private data.
> > + *
> > + * Use vfio_put_device() to release the structure after success return.
> > + */
> > +struct vfio_device *_vfio_alloc_device(size_t size, struct device *dev,
> > + const struct vfio_device_ops *ops)
> > +{
> > + struct vfio_device *device;
> > + int ret;
> > +
> > + if (WARN_ON(size < sizeof(struct vfio_device)))
> > + return ERR_PTR(-EINVAL);
> > +
> > + device = kvzalloc(size, GFP_KERNEL);
> > + if (!device)
> > + return ERR_PTR(-ENOMEM);
> > +
> > + ret = vfio_init_device(device, dev, ops);
> > + if (ret)
> > + goto out_free;
> > + return device;
> > +
> > +out_free:
> > + kvfree(device);
> > + return ERR_PTR(ret);
> > +}
> > +EXPORT_SYMBOL_GPL(_vfio_alloc_device);
> > +
> > +/*
> > + * Initialize a vfio_device so it can be registered to vfio core.
> > + *
> > + * Only vfio-ccw driver should call this interface.
> > + */
> > +int vfio_init_device(struct vfio_device *device, struct device *dev,
> > + const struct vfio_device_ops *ops)
> > +{
> > + int ret;
> > +
> > + vfio_init_group_dev(device, dev, ops);
> > +
> > + if (ops->init) {
> > + ret = ops->init(device);
> > + if (ret)
> > + goto out_uninit;
> > + }
> > +
> > + kref_init(&device->kref);
> > + return 0;
> > +
> > +out_uninit:
> > + vfio_uninit_group_dev(device);
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(vfio_init_device);
> > +
> > +/*
> > + * The helper called by driver @release callback to free the device
> > + * structure. Drivers which don't have private data to clean can
> > + * simply use this helper as its @release.
> > + */
> > +void vfio_free_device(struct vfio_device *device)
> > +{
> > + kvfree(device);
> > +}
> > +EXPORT_SYMBOL_GPL(vfio_free_device);
> > +
> > static struct vfio_group *vfio_noiommu_group_alloc(struct device *dev,
> > enum vfio_group_type type)
> > {
> > diff --git a/include/linux/vfio.h b/include/linux/vfio.h
> > index 0e2826559091..f67cac700e6f 100644
> > --- a/include/linux/vfio.h
> > +++ b/include/linux/vfio.h
> > @@ -47,7 +47,8 @@ struct vfio_device {
> > struct kvm *kvm;
> >
> > /* Members below here are private, not for driver use */
> > - refcount_t refcount;
> > + struct kref kref; /* object life cycle */
> > + refcount_t refcount; /* user count on registered device*/
> > unsigned int open_count;
> > struct completion comp;
> > struct list_head group_next;
> > @@ -57,6 +58,8 @@ struct vfio_device {
> > /**
> > * struct vfio_device_ops - VFIO bus driver device callbacks
> > *
> > + * @init: initialize private fields in device structure
> > + * @release: Reclaim private fields in device structure
> > * @open_device: Called when the first file descriptor is opened for this
> device
> > * @close_device: Opposite of open_device
> > * @read: Perform read(2) on device file descriptor
> > @@ -74,6 +77,8 @@ struct vfio_device {
> > */
> > struct vfio_device_ops {
> > char *name;
> > + int (*init)(struct vfio_device *vdev);
> > + void (*release)(struct vfio_device *vdev);
> > int (*open_device)(struct vfio_device *vdev);
> > void (*close_device)(struct vfio_device *vdev);
> > ssize_t (*read)(struct vfio_device *vdev, char __user *buf,
> > @@ -161,6 +166,24 @@ static inline int vfio_check_feature(u32 flags,
> size_t argsz, u32 supported_ops,
> > return 1;
> > }
> >
> > +struct vfio_device *_vfio_alloc_device(size_t size, struct device *dev,
> > + const struct vfio_device_ops *ops);
> > +#define vfio_alloc_device(dev_struct, member, dev, ops)
> \
> > + container_of(_vfio_alloc_device(sizeof(struct dev_struct) +
> \
> > + BUILD_BUG_ON_ZERO(offsetof(
> \
> > + struct dev_struct, member)),
> \
> > + dev, ops),
> \
> > + struct dev_struct, member)
> > +
> > +int vfio_init_device(struct vfio_device *device, struct device *dev,
> > + const struct vfio_device_ops *ops);
> > +void vfio_free_device(struct vfio_device *device);
> > +void vfio_device_release(struct kref *kref);
> > +static inline void vfio_put_device(struct vfio_device *device)
> > +{
> > + kref_put(&device->kref, vfio_device_release);
> > +}
> > +
> > void vfio_init_group_dev(struct vfio_device *device, struct device *dev,
> > const struct vfio_device_ops *ops);
> > void vfio_uninit_group_dev(struct vfio_device *device);
>
> --
> "firm, enduring, strong, and long-lived"
More information about the Intel-gfx
mailing list