[Intel-gfx] [PATCH v2 2/3] drm/i915/gt: Extract per-platform function for frequency read
Lucas De Marchi
lucas.demarchi at intel.com
Tue Sep 13 21:09:57 UTC 2022
Instead of calling read_clock_frequency() to walk the if/else ladder
per platform, move the ladder to intel_gt_init_clock_frequency() and
use one function per branch.
With the new logic, it's now clear the call to
gen9_get_crystal_clock_freq() was just dead code, as gen9 is handled by
another function and there is no version 10. Remove that function and
the caller.
v2: Correctly handle intel_gt_check_clock_frequency() that also calls
the function to read clock frequency (Gustavo)
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Cc: Gustavo Sousa <gustavo.sousa at intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi at intel.com>
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
index 93608c9349fd..3f656d3dba9a 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
+++ b/drivers/gpu/drm/i915/gt/intel_gt_clock_utils.c
@@ -26,26 +26,6 @@ static u32 read_reference_ts_freq(struct intel_uncore *uncore)
return base_freq + frac_freq;
}
-static u32 gen9_get_crystal_clock_freq(struct intel_uncore *uncore,
- u32 rpm_config_reg)
-{
- u32 f19_2_mhz = 19200000;
- u32 f24_mhz = 24000000;
- u32 crystal_clock =
- (rpm_config_reg & GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK) >>
- GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_SHIFT;
-
- switch (crystal_clock) {
- case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
- return f19_2_mhz;
- case GEN9_RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
- return f24_mhz;
- default:
- MISSING_CASE(crystal_clock);
- return 0;
- }
-}
-
static u32 gen11_get_crystal_clock_freq(struct intel_uncore *uncore,
u32 rpm_config_reg)
{
@@ -72,95 +52,106 @@ static u32 gen11_get_crystal_clock_freq(struct intel_uncore *uncore,
}
}
-static u32 read_clock_frequency(struct intel_uncore *uncore)
+static u32 gen11_read_clock_frequency(struct intel_uncore *uncore)
{
- u32 f12_5_mhz = 12500000;
- u32 f19_2_mhz = 19200000;
- u32 f24_mhz = 24000000;
+ u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
+ u32 freq = 0;
- if (GRAPHICS_VER(uncore->i915) >= 11) {
- u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
- u32 freq = 0;
+ /*
+ * Note that on gen11+, the clock frequency may be reconfigured.
+ * We do not, and we assume nobody else does.
+ *
+ * First figure out the reference frequency. There are 2 ways
+ * we can compute the frequency, either through the
+ * TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
+ * tells us which one we should use.
+ */
+ if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
+ freq = read_reference_ts_freq(uncore);
+ } else {
+ u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
+
+ freq = gen11_get_crystal_clock_freq(uncore, c0);
/*
- * First figure out the reference frequency. There are 2 ways
- * we can compute the frequency, either through the
- * TIMESTAMP_OVERRIDE register or through RPM_CONFIG. CTC_MODE
- * tells us which one we should use.
- */
- if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
- freq = read_reference_ts_freq(uncore);
- } else {
- u32 c0 = intel_uncore_read(uncore, RPM_CONFIG0);
-
- if (GRAPHICS_VER(uncore->i915) >= 11)
- freq = gen11_get_crystal_clock_freq(uncore, c0);
- else
- freq = gen9_get_crystal_clock_freq(uncore, c0);
-
- /*
- * Now figure out how the command stream's timestamp
- * register increments from this frequency (it might
- * increment only every few clock cycle).
- */
- freq >>= 3 - ((c0 & GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
- GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
- }
-
- return freq;
- } else if (GRAPHICS_VER(uncore->i915) >= 9) {
- u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
- u32 freq = 0;
-
- if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
- freq = read_reference_ts_freq(uncore);
- } else {
- freq = IS_GEN9_LP(uncore->i915) ? f19_2_mhz : f24_mhz;
-
- /*
- * Now figure out how the command stream's timestamp
- * register increments from this frequency (it might
- * increment only every few clock cycle).
- */
- freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
- CTC_SHIFT_PARAMETER_SHIFT);
- }
-
- return freq;
- } else if (GRAPHICS_VER(uncore->i915) >= 5) {
- /*
- * PRMs say:
- *
- * "The PCU TSC counts 10ns increments; this timestamp
- * reflects bits 38:3 of the TSC (i.e. 80ns granularity,
- * rolling over every 1.5 hours).
+ * Now figure out how the command stream's timestamp
+ * register increments from this frequency (it might
+ * increment only every few clock cycle).
*/
- return f12_5_mhz;
+ freq >>= 3 - ((c0 & GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK) >>
+ GEN10_RPM_CONFIG0_CTC_SHIFT_PARAMETER_SHIFT);
+ }
+
+ return freq;
+}
+
+static u32 gen9_read_clock_frequency(struct intel_uncore *uncore)
+{
+ u32 ctc_reg = intel_uncore_read(uncore, CTC_MODE);
+ u32 freq = 0;
+
+ if ((ctc_reg & CTC_SOURCE_PARAMETER_MASK) == CTC_SOURCE_DIVIDE_LOGIC) {
+ freq = read_reference_ts_freq(uncore);
} else {
+ freq = IS_GEN9_LP(uncore->i915) ? 19200000 : 24000000;
+
/*
- * PRMs say:
- *
- * "The value in this register increments once every 16
- * hclks." (through the “Clocking Configuration”
- * (“CLKCFG”) MCHBAR register)
+ * Now figure out how the command stream's timestamp
+ * register increments from this frequency (it might
+ * increment only every few clock cycle).
*/
- return RUNTIME_INFO(uncore->i915)->rawclk_freq * 1000 / 16;
+ freq >>= 3 - ((ctc_reg & CTC_SHIFT_PARAMETER_MASK) >>
+ CTC_SHIFT_PARAMETER_SHIFT);
}
+
+ return freq;
}
-void intel_gt_init_clock_frequency(struct intel_gt *gt)
+static u32 gen5_read_clock_frequency(struct intel_uncore *uncore)
{
/*
- * Note that on gen11+, the clock frequency may be reconfigured.
- * We do not, and we assume nobody else does.
+ * PRMs say:
+ *
+ * "The PCU TSC counts 10ns increments; this timestamp
+ * reflects bits 38:3 of the TSC (i.e. 80ns granularity,
+ * rolling over every 1.5 hours).
*/
+ return 12500000;
+}
+
+static u32 gen2_read_clock_frequency(struct intel_uncore *uncore)
+{
+ /*
+ * PRMs say:
+ *
+ * "The value in this register increments once every 16
+ * hclks." (through the “Clocking Configuration”
+ * (“CLKCFG”) MCHBAR register)
+ */
+ return RUNTIME_INFO(uncore->i915)->rawclk_freq * 1000 / 16;
+}
+
+static u32 read_clock_frequency(struct intel_uncore *uncore)
+{
+ if (GRAPHICS_VER(uncore->i915) >= 11)
+ return gen11_read_clock_frequency(uncore);
+ else if (GRAPHICS_VER(uncore->i915) >= 9)
+ return gen9_read_clock_frequency(uncore);
+ else if (GRAPHICS_VER(uncore->i915) >= 5)
+ return gen5_read_clock_frequency(uncore);
+ else
+ return gen2_read_clock_frequency(uncore);
+}
+
+void intel_gt_init_clock_frequency(struct intel_gt *gt)
+{
gt->clock_frequency = read_clock_frequency(gt->uncore);
- if (gt->clock_frequency)
- gt->clock_period_ns = intel_gt_clock_interval_to_ns(gt, 1);
/* Icelake appears to use another fixed frequency for CTX_TIMESTAMP */
if (GRAPHICS_VER(gt->i915) == 11)
gt->clock_period_ns = NSEC_PER_SEC / 13750000;
+ else if (gt->clock_frequency)
+ gt->clock_period_ns = intel_gt_clock_interval_to_ns(gt, 1);
GT_TRACE(gt,
"Using clock frequency: %dkHz, period: %dns, wrap: %lldms\n",
--
b4 0.10.0-dev-bbe61
More information about the Intel-gfx
mailing list