[Intel-gfx] [PATCH] drm/i915/DG{1, 2}: FIXME Temporary hammer to disable rpm

[Rodrigo Vivi]

On Wed, Sep 14, 2022 at 07:45:53PM +0530, Anshuman Gupta wrote:
> DG1 and DG2 has lmem, and cpu can access the lmem objects
> via mmap and i915 internal i915_gem_object_pin_map() for
> i915 own usages. Both of these methods has pre-requisite
> requirement to keep GFX PCI endpoint in D0 for a supported
> iomem transaction over PCI link. (Refer PCIe specs 5.3.1.4.1)
> 
> TODO:
> With respect to i915_gem_object_pin_map(), every caller
> has to grab a wakeref if gem object lies in lmem.
> 
> Till we fix all issues related to runtime PM, we need
> to keep runtime PM disable on both DG1 and DG2.
> 
> Cc: Matthew Auld <matthew.auld at intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi at intel.com>
> Signed-off-by: Anshuman Gupta <anshuman.gupta at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_pci.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
> index 77e7df21f539..f31d7f5399cc 100644
> --- a/drivers/gpu/drm/i915/i915_pci.c
> +++ b/drivers/gpu/drm/i915/i915_pci.c
> @@ -931,6 +931,26 @@ static const struct intel_device_info dg1_info = {
>  		BIT(VCS0) | BIT(VCS2),
>  	/* Wa_16011227922 */
>  	.__runtime.ppgtt_size = 47,
> +
> +	/*
> +	 *  FIXME: Temporary hammer to disable rpm.
> +	 *  As per PCIe specs 5.3.1.4.1, all iomem read write request over a PCIe
> +	 *  function will be unsupported in case PCIe endpoint function is in D3.
> +	 *  But both DG1/DG2 has a hardware bug that violates the PCIe specs
> +	 *  and supports the iomem read write transaction over PCIe bus despite
> +	 *  endpoint is D3 state.
> +	 *  Due to above H/W bug, we had never observed any issue with i915 runtime
> +	 *  PM versus lmem access.
> +	 *  But this issue gets discover when PCIe gfx endpoint's upstream
> +	 *  bridge enters to D3, at this point any lmem read/write access will be
> +	 *  returned as unsupported request. But again this issue is not observed
> +	 *  on every platform because it has been observed on few host machines
> +	 *  DG1/DG2 endpoint's upstream bridge does not binds with pcieport driver.
> +	 *  which really disables the PCIe power savings and leaves the bridge to D0
> +	 *  state.
> +	 *  Let's disable i915 rpm till we fix all known issue with lmem access in D3.
> +	 */
> +	.has_runtime_pm = 0,
>  };
>  
>  static const struct intel_device_info adl_s_info = {
> @@ -1076,6 +1096,7 @@ static const struct intel_device_info dg2_info = {
>  	XE_LPD_FEATURES,
>  	.__runtime.cpu_transcoder_mask = BIT(TRANSCODER_A) | BIT(TRANSCODER_B) |
>  			       BIT(TRANSCODER_C) | BIT(TRANSCODER_D),
> +	.has_runtime_pm = 0,

The FIXME msg can be smaller, but it also needs to be here.

With this in place fell free to use:

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

Since the proper solution might take a while let's protect from this case,
regardless of any other on going discussion about the force_probe protection.


>  	.require_force_probe = 1,
>  };
>  
> -- 
> 2.26.2
>