[Intel-gfx] [PATCH 1/2] drm/i915/mtl: Modify CAGF functions for MTL

[Matt Roper]

On Mon, Sep 19, 2022 at 03:46:47PM -0700, Matt Roper wrote:
> On Mon, Sep 19, 2022 at 05:29:05PM +0530, Badal Nilawar wrote:
> > Updated the CAGF functions to get actual resolved frequency of
> > 3D and SAMedia
> > 
> > Bspec: 66300
> > 
> > Cc: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
> > Cc: Ashutosh Dixit <ashutosh.dixit at intel.com>
> > Signed-off-by: Badal Nilawar <badal.nilawar at intel.com>
> > ---
> >  drivers/gpu/drm/i915/gt/intel_gt_regs.h | 8 ++++++++
> >  drivers/gpu/drm/i915/gt/intel_rps.c     | 6 +++++-
> >  2 files changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
> > index 2275ee47da95..7819d32db956 100644
> > --- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h
> > +++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
> > @@ -1510,6 +1510,14 @@
> >  #define VLV_RENDER_C0_COUNT			_MMIO(0x138118)
> >  #define VLV_MEDIA_C0_COUNT			_MMIO(0x13811c)
> >  
> > +/*
> > + * MTL: Workpoint reg to get Core C state and act freq of 3D, SAMedia/
> > + * 3D - 0x0C60 , SAMedia - 0x380C60
> > + * Intel uncore handler redirects transactions for SAMedia to MTL_MEDIA_GSI_BASE
> > + */

Also, this comment is unnecessary.  This is already how all GT registers
work so there's no reason to state this again on one one random
register.

> > +#define MTL_MIRROR_TARGET_WP1          _MMIO(0x0C60)
> > +#define   MTL_CAGF_MASK                REG_GENMASK(8, 0)
> > +
> 
> This register is at the wrong place in the file (and is misformatted).
>  - Keep it sorted with respect to the other registers in the file.
>  - Write it as "0xc60" for consistency with all the other registers
>    (i.e., lower-case hex, no unnecessary 0 prefix).
>  - The whitespace between the name and the REG_GENMASK should be tabs,
>    not spaces, ensuring it's lined up with the other definitions.
> 
> i915_reg.h turned into a huge mess over time because it wasn't
> consistently organized or formatted so nobody knew what to do when
> adding new registers.  We're trying to do a better job of following
> consistent rules with the new register headers so that we don't wind up
> with the same confusion again.
> 
> >  #define GEN11_GT_INTR_DW(x)			_MMIO(0x190018 + ((x) * 4))
> >  #define   GEN11_CSME				(31)
> >  #define   GEN11_GUNIT				(28)
> > diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
> > index 17b40b625e31..c2349949ebae 100644
> > --- a/drivers/gpu/drm/i915/gt/intel_rps.c
> > +++ b/drivers/gpu/drm/i915/gt/intel_rps.c
> > @@ -2075,6 +2075,8 @@ u32 intel_rps_get_cagf(struct intel_rps *rps, u32 rpstat)
> >  
> >  	if (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915))
> >  		cagf = (rpstat >> 8) & 0xff;
> > +	else if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 70))
> > +		cagf = rpstat & MTL_CAGF_MASK;
> 
> Generally we try to put the newer platform at the top of if/else
> ladders.  So this new MTL code should come before the VLV/CHV branch.
> 
> >  	else if (GRAPHICS_VER(i915) >= 9)
> >  		cagf = (rpstat & GEN9_CAGF_MASK) >> GEN9_CAGF_SHIFT;
> >  	else if (IS_HASWELL(i915) || IS_BROADWELL(i915))
> > @@ -2098,7 +2100,9 @@ static u32 read_cagf(struct intel_rps *rps)
> >  		vlv_punit_get(i915);
> >  		freq = vlv_punit_read(i915, PUNIT_REG_GPU_FREQ_STS);
> >  		vlv_punit_put(i915);
> > -	} else if (GRAPHICS_VER(i915) >= 6) {
> > +	} else if (GRAPHICS_VER_FULL(i915) >= IP_VER(12, 70))
> > +		freq = intel_uncore_read(rps_to_gt(rps)->uncore, MTL_MIRROR_TARGET_WP1);
> 
> Same here.
> 
> 
> Matt
> 
> > +	else if (GRAPHICS_VER(i915) >= 6) {
> >  		freq = intel_uncore_read(uncore, GEN6_RPSTAT1);
> >  	} else {
> >  		freq = intel_uncore_read(uncore, MEMSTAT_ILK);
> > -- 
> > 2.25.1
> > 
> 
> -- 
> Matt Roper
> Graphics Software Engineer
> VTT-OSGC Platform Enablement
> Intel Corporation

-- 
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation