[Intel-gfx] [PATCH] drm/i915: Allow D3 when we are not actively managing a known PCI device.
Gupta, Anshuman
anshuman.gupta at intel.com
Thu Sep 22 12:40:47 UTC 2022
> -----Original Message-----
> From: Gupta, Anshuman
> Sent: Thursday, September 22, 2022 4:40 PM
> To: Vivi, Rodrigo <rodrigo.vivi at intel.com>; Tvrtko Ursulin
> <tvrtko.ursulin at linux.intel.com>
> Cc: Nikula, Jani <jani.nikula at intel.com>; intel-gfx at lists.freedesktop.org; Daniel
> J Blueman <daniel at quora.org>; Wysocki, Rafael J
> <rafael.j.wysocki at intel.com>; stable at vger.kernel.org
> Subject: Re: [Intel-gfx] [PATCH] drm/i915: Allow D3 when we are not actively
> managing a known PCI device.
>
>
>
> On 9/22/2022 3:13 PM, Rodrigo Vivi wrote:
> > On Thu, Sep 22, 2022 at 08:56:00AM +0100, Tvrtko Ursulin wrote:
> >>
> >> On 21/09/2022 18:39, Rodrigo Vivi wrote:
> >>> The force_probe protection actively avoids the probe of i915 to
> >>> manage a device that is currently under development. It is a nice
> >>> protection for future users when getting a new platform but using
> >>> some older kernel.
> >>>
> >>> However, when we avoid the probe we don't take back the registration
> >>> of the device. We cannot give up the registration anyway since we
> >>> can have multiple devices present. For instance an integrated and a
> >>> discrete one.
> >>>
> >>> When this scenario occurs, the user will not be able to change any
> >>> of the runtime pm configuration of the unmanaged device. So, it will
> >>> be blocked in D0 state wasting power. This is specially bad in the
> >>> case where we have a discrete platform attached, but the user is
> >>> able to fully use the integrated one for everything else.
> >>>
> >>> So, let's put the protected and unmanaged device in D3. So we can
> >>> save some power.
> >>>
> >>> Reported-by: Daniel J Blueman <daniel at quora.org>
> >>> Cc: stable at vger.kernel.org
> >>> Cc: Daniel J Blueman <daniel at quora.org>
> >>> Cc: Tvrtko Ursulin <tvrtko.ursulin at intel.com>
> >>> Cc: Anshuman Gupta <anshuman.gupta at intel.com>
> >>> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
> >>> ---
> >>> drivers/gpu/drm/i915/i915_pci.c | 8 ++++++++
> >>> 1 file changed, 8 insertions(+)
> >>>
> >>> diff --git a/drivers/gpu/drm/i915/i915_pci.c
> >>> b/drivers/gpu/drm/i915/i915_pci.c index 77e7df21f539..fc3e7c69af2a
> >>> 100644
> >>> --- a/drivers/gpu/drm/i915/i915_pci.c
> >>> +++ b/drivers/gpu/drm/i915/i915_pci.c
> >>> @@ -25,6 +25,7 @@
> >>> #include <drm/drm_color_mgmt.h>
> >>> #include <drm/drm_drv.h>
> >>> #include <drm/i915_pciids.h>
> >>> +#include <linux/pm_runtime.h>
> >>> #include "gt/intel_gt_regs.h"
> >>> #include "gt/intel_sa_media.h"
> >>> @@ -1304,6 +1305,7 @@ static int i915_pci_probe(struct pci_dev *pdev,
> const struct pci_device_id *ent)
> >>> {
> >>> struct intel_device_info *intel_info =
> >>> (struct intel_device_info *) ent->driver_data;
> >>> + struct device *kdev = &pdev->dev;
> >>> int err;
> >>> if (intel_info->require_force_probe && @@ -1314,6 +1316,12 @@
> >>> static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id
> *ent)
> >>> "module parameter or
> CONFIG_DRM_I915_FORCE_PROBE=%04x configuration option,\n"
> >>> "or (recommended) check for kernel updates.\n",
> >>> pdev->device, pdev->device, pdev->device);
> >>> +
> >>> + /* Let's not waste power if we are not managing the device */
> >>> + pm_runtime_use_autosuspend(kdev);
> >>> + pm_runtime_allow(kdev);
> >>> + pm_runtime_put_autosuspend(kdev);
> AFAIK we don't need to enable autosuspend here,
> pm_runtime_put_autosuspend() will cause a NULL pointer de-reference as it will
> immediately call the intel_runtime_suspend()(because we haven't called the
> pm_runtime_mark_last_busy) without initializing i915.
>
> Having said that we only need below, in order to let pci core keep the pci dev in
> D3.
>
> pm_runtime_put_noidle()
Hi Rodrigo ,
It seems playing with these runtime hooks, will only enable the "runtime suspend"
but actual state in "PMCSR" pci config is D0 despite device is runtime suspended, when there is no driver.
Example:
root at DUT2135-DG2MRB:/home/gta# cat /sys/bus/pci/devices/0000\:03\:00.0/power/runtime_status
suspended
root at DUT2135-DG2MRB:/home/gta# setpci -s 03:00.0 0xd4.l
00000008
(Bits 00:01 are the power state in PMCSR(offset = 4) config register from PM Cap offset at 0xd0).
Thanks,
Anshuman Gupta.
>
> Br,
> Anshuman Gupta
>
>
> >>
> >> This sequence is black magic to me so can't really comment on the specifics.
> But in general, what I think I've figured out is, that the PCI core calls our runtime
> resume callback before probe:
> >>
> >> local_pci_probe:
> >> ...
> >> /*
> >> * Unbound PCI devices are always put in D0, regardless of
> >> * runtime PM status. During probe, the device is set to
> >> * active and the usage count is incremented. If the driver
> >> * supports runtime PM, it should call pm_runtime_put_noidle(),
> >> * or any other runtime PM helper function decrementing the usage
> >> * count, in its probe routine and pm_runtime_get_noresume() in
> >> * its remove routine.
> >> */
> >> pm_runtime_get_sync(dev);
> >> pci_dev->driver = pci_drv;
> >> rc = pci_drv->probe(pci_dev, ddi->id);
> >> if (!rc)
> >> return rc;
> >> if (rc < 0) {
> >> pci_dev->driver = NULL;
> >> pm_runtime_put_sync(dev);
> >> return rc;
> >> }
> >>
> >
> > Yes, in Linux the default is D0 for any unmanaged device. But then the
> > user can go there in the sysfs and change the power/control to 'auto'
> > and get the device to D3.
> >
> >> And if probe fails it calls pm_runtime_put_sync which presumably does not
> provide the symmetry we need?
> >
> > The main problem I see is that when the probe fail in our case we
> > don't unregister and i915 is still listed as controlling that device
> > as we could see with lspci --nnv.
> >
> > And any attempt to change the control to 'auto' fails. So we are
> > forever stuck in D0.
> >
> > So, I really believe it is better to bring the device to D3 then
> > leaving it there blocked in D0 forever.
> >
> > Or forcing users to use another parameter to entirely avoid i915 to
> > get this device at first place.
> >
> >>
> >> Anyway since I can't provide meaningful review I'll copy Imre since I think he
> worked in the area in the past. Just so more eyes is better.
> >>
> >> Regards,
> >>
> >> Tvrtko
> >>
> >>
> >>> +
> >>> return -ENODEV;
> >>> }
More information about the Intel-gfx
mailing list