[Intel-gfx] [PATCH v5 5/5] drm/i915/gt: Make sure that errors are propagated through request chains

[Tvrtko Ursulin]

On 13/04/2023 12:56, Tvrtko Ursulin wrote:
> 
> On 12/04/2023 12:33, Andi Shyti wrote:
>> Currently, when we perform operations such as clearing or copying
>> large blocks of memory, we generate multiple requests that are
>> executed in a chain.
>>
>> However, if one of these requests fails, we may not realize it
>> unless it happens to be the last request in the chain. This is
>> because errors are not properly propagated.
>>
>> For this we need to keep propagating the chain of fence
>> notification in order to always reach the final fence associated
>> to the final request.
>>
>> To address this issue, we need to ensure that the chain of fence
>> notifications is always propagated so that we can reach the final
>> fence associated with the last request. By doing so, we will be
>> able to detect any memory operation  failures and determine
>> whether the memory is still invalid.
> 
> Above two paragraphs seems to have redundancy in the message they convey.
> 
>> On copy and clear migration signal fences upon completion.
>>
>> On copy and clear migration, signal fences upon request
>> completion to ensure that we have a reliable perpetuation of the
>> operation outcome.
> 
> These two too. So I think commit message can be a bit polished.
> 
>> Fixes: cf586021642d80 ("drm/i915/gt: Pipelined page migration")
>> Reported-by: Matthew Auld <matthew.auld at intel.com>
>> Suggested-by: Chris Wilson <chris at chris-wilson.co.uk>
>> Signed-off-by: Andi Shyti <andi.shyti at linux.intel.com>
>> Cc: stable at vger.kernel.org
>> Reviewed-by: Matthew Auld <matthew.auld at intel.com>
>> Acked-by: Nirmoy Das <nirmoy.das at intel.com>
>> ---
>>   drivers/gpu/drm/i915/gt/intel_migrate.c | 51 +++++++++++++++++++------
>>   1 file changed, 39 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/i915/gt/intel_migrate.c 
>> b/drivers/gpu/drm/i915/gt/intel_migrate.c
>> index 3f638f1987968..668c95af8cbcf 100644
>> --- a/drivers/gpu/drm/i915/gt/intel_migrate.c
>> +++ b/drivers/gpu/drm/i915/gt/intel_migrate.c
>> @@ -742,13 +742,19 @@ intel_context_migrate_copy(struct intel_context 
>> *ce,
>>               dst_offset = 2 * CHUNK_SZ;
>>       }
>> +    /*
>> +     * While building the chain of requests, we need to ensure
>> +     * that no one can sneak into the timeline unnoticed.
>> +     */
>> +    mutex_lock(&ce->timeline->mutex);
>> +
>>       do {
>>           int len;
>> -        rq = i915_request_create(ce);
>> +        rq = i915_request_create_locked(ce);
>>           if (IS_ERR(rq)) {
>>               err = PTR_ERR(rq);
>> -            goto out_ce;
>> +            break;
>>           }
>>           if (deps) {
>> @@ -878,10 +884,14 @@ intel_context_migrate_copy(struct intel_context 
>> *ce,
>>           /* Arbitration is re-enabled between requests. */
>>   out_rq:
>> -        if (*out)
>> +        i915_sw_fence_await(&rq->submit);
>> +        i915_request_get(rq);
>> +        i915_request_add_locked(rq);
>> +        if (*out) {
>> +            i915_sw_fence_complete(&(*out)->submit);
>>               i915_request_put(*out);
> 
> Could you help me understand this please. I have a few questions - 
> first, what are the actual mechanics of fence error transfer here? I see 
> the submit fence is being blocked until the next request is submitted - 
> effectively previous request is only allowed to get on the hardware 
> after the next one has been queued up. But I don't immediately see what 
> that does in practice.
> 
> Second question relates to the need to hold the timeline mutex 
> throughout. Presumably this is so two copy or migrate operations on the 
> same context do not interleave, which can otherwise happen?
> 
> Would the error propagation be doable without the lock held by chaining 
> on the previous request _completion_ fence? If so I am sure that would 
> have a performance impact, because chunk by chunk would need a GPU<->CPU 
> round trip to schedule. How much of an impact I don't know. Maybe 
> enlarging CHUNK_SZ to compensate is an option?
> 
> Or if the perf hit would be bearable for stable backports only (much 
> smaller patch) and then for tip we can do this full speed solution.
> 
> But yes, I would first want to understand the actual error propagation 
> mechanism because sadly my working knowledge is a bit rusty.

Another option - maybe - is this related to revert of fence error 
propagation? If it is and having that would avoid the need for this 
invasive fix, maybe we unrevert 3761baae908a7b5012be08d70fa553cc2eb82305 
with edits to limit to special contexts? If doable..

Regards,

Tvrtko

> 
>> -        *out = i915_request_get(rq);
>> -        i915_request_add(rq);
>> +        }
>> +        *out = rq;
>>           if (err)
>>               break;
>> @@ -905,7 +915,10 @@ intel_context_migrate_copy(struct intel_context *ce,
>>           cond_resched();
>>       } while (1);
>> -out_ce:
>> +    mutex_unlock(&ce->timeline->mutex);
>> +
>> +    if (*out)
>> +        i915_sw_fence_complete(&(*out)->submit);
>>       return err;
>>   }
>> @@ -999,13 +1012,19 @@ intel_context_migrate_clear(struct 
>> intel_context *ce,
>>       if (HAS_64K_PAGES(i915) && is_lmem)
>>           offset = CHUNK_SZ;
>> +    /*
>> +     * While building the chain of requests, we need to ensure
>> +     * that no one can sneak into the timeline unnoticed.
>> +     */
>> +    mutex_lock(&ce->timeline->mutex);
>> +
>>       do {
>>           int len;
>> -        rq = i915_request_create(ce);
>> +        rq = i915_request_create_locked(ce);
>>           if (IS_ERR(rq)) {
>>               err = PTR_ERR(rq);
>> -            goto out_ce;
>> +            break;
>>           }
>>           if (deps) {
>> @@ -1056,17 +1075,25 @@ intel_context_migrate_clear(struct 
>> intel_context *ce,
>>           /* Arbitration is re-enabled between requests. */
>>   out_rq:
>> -        if (*out)
>> +        i915_sw_fence_await(&rq->submit);
>> +        i915_request_get(rq);
>> +        i915_request_add_locked(rq);
>> +        if (*out) {
>> +            i915_sw_fence_complete(&(*out)->submit);
>>               i915_request_put(*out);
>> -        *out = i915_request_get(rq);
>> -        i915_request_add(rq);
>> +        }
>> +        *out = rq;
> 
> Btw if all else fails perhaps these two blocks can be consolidated by 
> something like __chain_requests(rq, out) and all these operations in it. 
> Not sure how much would that save in the grand total.
> 
> Regards,
> 
> Tvrtko
> 
>> +
>>           if (err || !it.sg || !sg_dma_len(it.sg))
>>               break;
>>           cond_resched();
>>       } while (1);
>> -out_ce:
>> +    mutex_unlock(&ce->timeline->mutex);
>> +
>> +    if (*out)
>> +        i915_sw_fence_complete(&(*out)->submit);
>>       return err;
>>   }