[Intel-gfx] [PATCH 3/3] drm/i915: Use min() instead of hand rolling it

[Golani, Mitulkumar Ajitkumar]

Hi Ville

> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces at lists.freedesktop.org> On Behalf Of Ville
> Syrjala
> Sent: 04 April 2023 23:25
> To: intel-gfx at lists.freedesktop.org
> Subject: [Intel-gfx] [PATCH 3/3] drm/i915: Use min() instead of hand rolling it
> 
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Most places in the vblank code use min() to clamp scanline counters below
> vtotal. But we missed one in the gen3/4 pixel counter based codepath.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_vblank.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_vblank.c
> b/drivers/gpu/drm/i915/display/intel_vblank.c
> index f8bf9810527d..136393d99298 100644
> --- a/drivers/gpu/drm/i915/display/intel_vblank.c
> +++ b/drivers/gpu/drm/i915/display/intel_vblank.c
> @@ -340,8 +340,7 @@ static bool i915_get_crtc_scanoutpos(struct drm_crtc
> *_crtc,
>  		 * matches how the scanline counter based position works
> since
>  		 * the scanline counter doesn't count the two half lines.
>  		 */
> -		if (position >= vtotal)
> -			position = vtotal - 1;
> +		position = min(position, vtotal - 1);

changes LGTM. 
Thanks
 
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>

> 
>  		/*
>  		 * Start of vblank interrupt is triggered at start of hsync,
> --
> 2.39.2