[Intel-gfx] [PATCH 03/15] drm/i915: Relocate intel_atomic_setup_scalers()
Ville Syrjala
ville.syrjala at linux.intel.com
Tue Apr 18 17:55:16 UTC 2023
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Move intel_atomic_setup_scalers() next to the other scaler
code in skl_scaler.c.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_atomic.c | 256 -------------------
drivers/gpu/drm/i915/display/intel_atomic.h | 4 -
drivers/gpu/drm/i915/display/skl_scaler.c | 257 ++++++++++++++++++++
drivers/gpu/drm/i915/display/skl_scaler.h | 10 +-
4 files changed, 265 insertions(+), 262 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c b/drivers/gpu/drm/i915/display/intel_atomic.c
index 61011641f6ab..7cf51dd8c056 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic.c
+++ b/drivers/gpu/drm/i915/display/intel_atomic.c
@@ -310,262 +310,6 @@ intel_crtc_destroy_state(struct drm_crtc *crtc,
kfree(crtc_state);
}
-static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
- int num_scalers_need, struct intel_crtc *intel_crtc,
- const char *name, int idx,
- struct intel_plane_state *plane_state,
- int *scaler_id)
-{
- struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
- int j;
- u32 mode;
-
- if (*scaler_id < 0) {
- /* find a free scaler */
- for (j = 0; j < intel_crtc->num_scalers; j++) {
- if (scaler_state->scalers[j].in_use)
- continue;
-
- *scaler_id = j;
- scaler_state->scalers[*scaler_id].in_use = 1;
- break;
- }
- }
-
- if (drm_WARN(&dev_priv->drm, *scaler_id < 0,
- "Cannot find scaler for %s:%d\n", name, idx))
- return -EINVAL;
-
- /* set scaler mode */
- if (plane_state && plane_state->hw.fb &&
- plane_state->hw.fb->format->is_yuv &&
- plane_state->hw.fb->format->num_planes > 1) {
- struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
- if (DISPLAY_VER(dev_priv) == 9) {
- mode = SKL_PS_SCALER_MODE_NV12;
- } else if (icl_is_hdr_plane(dev_priv, plane->id)) {
- /*
- * On gen11+'s HDR planes we only use the scaler for
- * scaling. They have a dedicated chroma upsampler, so
- * we don't need the scaler to upsample the UV plane.
- */
- mode = PS_SCALER_MODE_NORMAL;
- } else {
- struct intel_plane *linked =
- plane_state->planar_linked_plane;
-
- mode = PS_SCALER_MODE_PLANAR;
-
- if (linked)
- mode |= PS_PLANE_Y_SEL(linked->id);
- }
- } else if (DISPLAY_VER(dev_priv) >= 10) {
- mode = PS_SCALER_MODE_NORMAL;
- } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
- /*
- * when only 1 scaler is in use on a pipe with 2 scalers
- * scaler 0 operates in high quality (HQ) mode.
- * In this case use scaler 0 to take advantage of HQ mode
- */
- scaler_state->scalers[*scaler_id].in_use = 0;
- *scaler_id = 0;
- scaler_state->scalers[0].in_use = 1;
- mode = SKL_PS_SCALER_MODE_HQ;
- } else {
- mode = SKL_PS_SCALER_MODE_DYN;
- }
-
- /*
- * FIXME: we should also check the scaler factors for pfit, so
- * this shouldn't be tied directly to planes.
- */
- if (plane_state && plane_state->hw.fb) {
- const struct drm_framebuffer *fb = plane_state->hw.fb;
- const struct drm_rect *src = &plane_state->uapi.src;
- const struct drm_rect *dst = &plane_state->uapi.dst;
- int hscale, vscale, max_vscale, max_hscale;
-
- /*
- * FIXME: When two scalers are needed, but only one of
- * them needs to downscale, we should make sure that
- * the one that needs downscaling support is assigned
- * as the first scaler, so we don't reject downscaling
- * unnecessarily.
- */
-
- if (DISPLAY_VER(dev_priv) >= 14) {
- /*
- * On versions 14 and up, only the first
- * scaler supports a vertical scaling factor
- * of more than 1.0, while a horizontal
- * scaling factor of 3.0 is supported.
- */
- max_hscale = 0x30000 - 1;
- if (*scaler_id == 0)
- max_vscale = 0x30000 - 1;
- else
- max_vscale = 0x10000;
-
- } else if (DISPLAY_VER(dev_priv) >= 10 ||
- !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) {
- max_hscale = 0x30000 - 1;
- max_vscale = 0x30000 - 1;
- } else {
- max_hscale = 0x20000 - 1;
- max_vscale = 0x20000 - 1;
- }
-
- /*
- * FIXME: We should change the if-else block above to
- * support HQ vs dynamic scaler properly.
- */
-
- /* Check if required scaling is within limits */
- hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale);
- vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale);
-
- if (hscale < 0 || vscale < 0) {
- drm_dbg_kms(&dev_priv->drm,
- "Scaler %d doesn't support required plane scaling\n",
- *scaler_id);
- drm_rect_debug_print("src: ", src, true);
- drm_rect_debug_print("dst: ", dst, false);
-
- return -EINVAL;
- }
- }
-
- drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n",
- intel_crtc->pipe, *scaler_id, name, idx);
- scaler_state->scalers[*scaler_id].mode = mode;
-
- return 0;
-}
-
-/**
- * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
- * @dev_priv: i915 device
- * @intel_crtc: intel crtc
- * @crtc_state: incoming crtc_state to validate and setup scalers
- *
- * This function sets up scalers based on staged scaling requests for
- * a @crtc and its planes. It is called from crtc level check path. If request
- * is a supportable request, it attaches scalers to requested planes and crtc.
- *
- * This function takes into account the current scaler(s) in use by any planes
- * not being part of this atomic state
- *
- * Returns:
- * 0 - scalers were setup succesfully
- * error code - otherwise
- */
-int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
- struct intel_crtc *intel_crtc,
- struct intel_crtc_state *crtc_state)
-{
- struct drm_plane *plane = NULL;
- struct intel_plane *intel_plane;
- struct intel_plane_state *plane_state = NULL;
- struct intel_crtc_scaler_state *scaler_state =
- &crtc_state->scaler_state;
- struct drm_atomic_state *drm_state = crtc_state->uapi.state;
- struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state);
- int num_scalers_need;
- int i;
-
- num_scalers_need = hweight32(scaler_state->scaler_users);
-
- /*
- * High level flow:
- * - staged scaler requests are already in scaler_state->scaler_users
- * - check whether staged scaling requests can be supported
- * - add planes using scalers that aren't in current transaction
- * - assign scalers to requested users
- * - as part of plane commit, scalers will be committed
- * (i.e., either attached or detached) to respective planes in hw
- * - as part of crtc_commit, scaler will be either attached or detached
- * to crtc in hw
- */
-
- /* fail if required scalers > available scalers */
- if (num_scalers_need > intel_crtc->num_scalers){
- drm_dbg_kms(&dev_priv->drm,
- "Too many scaling requests %d > %d\n",
- num_scalers_need, intel_crtc->num_scalers);
- return -EINVAL;
- }
-
- /* walkthrough scaler_users bits and start assigning scalers */
- for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
- int *scaler_id;
- const char *name;
- int idx, ret;
-
- /* skip if scaler not required */
- if (!(scaler_state->scaler_users & (1 << i)))
- continue;
-
- if (i == SKL_CRTC_INDEX) {
- name = "CRTC";
- idx = intel_crtc->base.base.id;
-
- /* panel fitter case: assign as a crtc scaler */
- scaler_id = &scaler_state->scaler_id;
- } else {
- name = "PLANE";
-
- /* plane scaler case: assign as a plane scaler */
- /* find the plane that set the bit as scaler_user */
- plane = drm_state->planes[i].ptr;
-
- /*
- * to enable/disable hq mode, add planes that are using scaler
- * into this transaction
- */
- if (!plane) {
- struct drm_plane_state *state;
-
- /*
- * GLK+ scalers don't have a HQ mode so it
- * isn't necessary to change between HQ and dyn mode
- * on those platforms.
- */
- if (DISPLAY_VER(dev_priv) >= 10)
- continue;
-
- plane = drm_plane_from_index(&dev_priv->drm, i);
- state = drm_atomic_get_plane_state(drm_state, plane);
- if (IS_ERR(state)) {
- drm_dbg_kms(&dev_priv->drm,
- "Failed to add [PLANE:%d] to drm_state\n",
- plane->base.id);
- return PTR_ERR(state);
- }
- }
-
- intel_plane = to_intel_plane(plane);
- idx = plane->base.id;
-
- /* plane on different crtc cannot be a scaler user of this crtc */
- if (drm_WARN_ON(&dev_priv->drm,
- intel_plane->pipe != intel_crtc->pipe))
- continue;
-
- plane_state = intel_atomic_get_new_plane_state(intel_state,
- intel_plane);
- scaler_id = &plane_state->scaler_id;
- }
-
- ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need,
- intel_crtc, name, idx,
- plane_state, scaler_id);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
struct drm_atomic_state *
intel_atomic_state_alloc(struct drm_device *dev)
{
diff --git a/drivers/gpu/drm/i915/display/intel_atomic.h b/drivers/gpu/drm/i915/display/intel_atomic.h
index 1dc439983dd9..e506f6a87344 100644
--- a/drivers/gpu/drm/i915/display/intel_atomic.h
+++ b/drivers/gpu/drm/i915/display/intel_atomic.h
@@ -52,8 +52,4 @@ struct intel_crtc_state *
intel_atomic_get_crtc_state(struct drm_atomic_state *state,
struct intel_crtc *crtc);
-int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
- struct intel_crtc *intel_crtc,
- struct intel_crtc_state *crtc_state);
-
#endif /* __INTEL_ATOMIC_H__ */
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.c b/drivers/gpu/drm/i915/display/skl_scaler.c
index 0e7e014fcc71..62443834f64e 100644
--- a/drivers/gpu/drm/i915/display/skl_scaler.c
+++ b/drivers/gpu/drm/i915/display/skl_scaler.c
@@ -348,6 +348,263 @@ int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
return 0;
}
+static int intel_atomic_setup_scaler(struct intel_crtc_scaler_state *scaler_state,
+ int num_scalers_need, struct intel_crtc *intel_crtc,
+ const char *name, int idx,
+ struct intel_plane_state *plane_state,
+ int *scaler_id)
+{
+ struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+ int j;
+ u32 mode;
+
+ if (*scaler_id < 0) {
+ /* find a free scaler */
+ for (j = 0; j < intel_crtc->num_scalers; j++) {
+ if (scaler_state->scalers[j].in_use)
+ continue;
+
+ *scaler_id = j;
+ scaler_state->scalers[*scaler_id].in_use = 1;
+ break;
+ }
+ }
+
+ if (drm_WARN(&dev_priv->drm, *scaler_id < 0,
+ "Cannot find scaler for %s:%d\n", name, idx))
+ return -EINVAL;
+
+ /* set scaler mode */
+ if (plane_state && plane_state->hw.fb &&
+ plane_state->hw.fb->format->is_yuv &&
+ plane_state->hw.fb->format->num_planes > 1) {
+ struct intel_plane *plane = to_intel_plane(plane_state->uapi.plane);
+
+ if (DISPLAY_VER(dev_priv) == 9) {
+ mode = SKL_PS_SCALER_MODE_NV12;
+ } else if (icl_is_hdr_plane(dev_priv, plane->id)) {
+ /*
+ * On gen11+'s HDR planes we only use the scaler for
+ * scaling. They have a dedicated chroma upsampler, so
+ * we don't need the scaler to upsample the UV plane.
+ */
+ mode = PS_SCALER_MODE_NORMAL;
+ } else {
+ struct intel_plane *linked =
+ plane_state->planar_linked_plane;
+
+ mode = PS_SCALER_MODE_PLANAR;
+
+ if (linked)
+ mode |= PS_PLANE_Y_SEL(linked->id);
+ }
+ } else if (DISPLAY_VER(dev_priv) >= 10) {
+ mode = PS_SCALER_MODE_NORMAL;
+ } else if (num_scalers_need == 1 && intel_crtc->num_scalers > 1) {
+ /*
+ * when only 1 scaler is in use on a pipe with 2 scalers
+ * scaler 0 operates in high quality (HQ) mode.
+ * In this case use scaler 0 to take advantage of HQ mode
+ */
+ scaler_state->scalers[*scaler_id].in_use = 0;
+ *scaler_id = 0;
+ scaler_state->scalers[0].in_use = 1;
+ mode = SKL_PS_SCALER_MODE_HQ;
+ } else {
+ mode = SKL_PS_SCALER_MODE_DYN;
+ }
+
+ /*
+ * FIXME: we should also check the scaler factors for pfit, so
+ * this shouldn't be tied directly to planes.
+ */
+ if (plane_state && plane_state->hw.fb) {
+ const struct drm_framebuffer *fb = plane_state->hw.fb;
+ const struct drm_rect *src = &plane_state->uapi.src;
+ const struct drm_rect *dst = &plane_state->uapi.dst;
+ int hscale, vscale, max_vscale, max_hscale;
+
+ /*
+ * FIXME: When two scalers are needed, but only one of
+ * them needs to downscale, we should make sure that
+ * the one that needs downscaling support is assigned
+ * as the first scaler, so we don't reject downscaling
+ * unnecessarily.
+ */
+
+ if (DISPLAY_VER(dev_priv) >= 14) {
+ /*
+ * On versions 14 and up, only the first
+ * scaler supports a vertical scaling factor
+ * of more than 1.0, while a horizontal
+ * scaling factor of 3.0 is supported.
+ */
+ max_hscale = 0x30000 - 1;
+ if (*scaler_id == 0)
+ max_vscale = 0x30000 - 1;
+ else
+ max_vscale = 0x10000;
+
+ } else if (DISPLAY_VER(dev_priv) >= 10 ||
+ !intel_format_info_is_yuv_semiplanar(fb->format, fb->modifier)) {
+ max_hscale = 0x30000 - 1;
+ max_vscale = 0x30000 - 1;
+ } else {
+ max_hscale = 0x20000 - 1;
+ max_vscale = 0x20000 - 1;
+ }
+
+ /*
+ * FIXME: We should change the if-else block above to
+ * support HQ vs dynamic scaler properly.
+ */
+
+ /* Check if required scaling is within limits */
+ hscale = drm_rect_calc_hscale(src, dst, 1, max_hscale);
+ vscale = drm_rect_calc_vscale(src, dst, 1, max_vscale);
+
+ if (hscale < 0 || vscale < 0) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Scaler %d doesn't support required plane scaling\n",
+ *scaler_id);
+ drm_rect_debug_print("src: ", src, true);
+ drm_rect_debug_print("dst: ", dst, false);
+
+ return -EINVAL;
+ }
+ }
+
+ drm_dbg_kms(&dev_priv->drm, "Attached scaler id %u.%u to %s:%d\n",
+ intel_crtc->pipe, *scaler_id, name, idx);
+ scaler_state->scalers[*scaler_id].mode = mode;
+
+ return 0;
+}
+
+/**
+ * intel_atomic_setup_scalers() - setup scalers for crtc per staged requests
+ * @dev_priv: i915 device
+ * @intel_crtc: intel crtc
+ * @crtc_state: incoming crtc_state to validate and setup scalers
+ *
+ * This function sets up scalers based on staged scaling requests for
+ * a @crtc and its planes. It is called from crtc level check path. If request
+ * is a supportable request, it attaches scalers to requested planes and crtc.
+ *
+ * This function takes into account the current scaler(s) in use by any planes
+ * not being part of this atomic state
+ *
+ * Returns:
+ * 0 - scalers were setup successfully
+ * error code - otherwise
+ */
+int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
+ struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state)
+{
+ struct drm_plane *plane = NULL;
+ struct intel_plane *intel_plane;
+ struct intel_plane_state *plane_state = NULL;
+ struct intel_crtc_scaler_state *scaler_state =
+ &crtc_state->scaler_state;
+ struct drm_atomic_state *drm_state = crtc_state->uapi.state;
+ struct intel_atomic_state *intel_state = to_intel_atomic_state(drm_state);
+ int num_scalers_need;
+ int i;
+
+ num_scalers_need = hweight32(scaler_state->scaler_users);
+
+ /*
+ * High level flow:
+ * - staged scaler requests are already in scaler_state->scaler_users
+ * - check whether staged scaling requests can be supported
+ * - add planes using scalers that aren't in current transaction
+ * - assign scalers to requested users
+ * - as part of plane commit, scalers will be committed
+ * (i.e., either attached or detached) to respective planes in hw
+ * - as part of crtc_commit, scaler will be either attached or detached
+ * to crtc in hw
+ */
+
+ /* fail if required scalers > available scalers */
+ if (num_scalers_need > intel_crtc->num_scalers) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Too many scaling requests %d > %d\n",
+ num_scalers_need, intel_crtc->num_scalers);
+ return -EINVAL;
+ }
+
+ /* walkthrough scaler_users bits and start assigning scalers */
+ for (i = 0; i < sizeof(scaler_state->scaler_users) * 8; i++) {
+ int *scaler_id;
+ const char *name;
+ int idx, ret;
+
+ /* skip if scaler not required */
+ if (!(scaler_state->scaler_users & (1 << i)))
+ continue;
+
+ if (i == SKL_CRTC_INDEX) {
+ name = "CRTC";
+ idx = intel_crtc->base.base.id;
+
+ /* panel fitter case: assign as a crtc scaler */
+ scaler_id = &scaler_state->scaler_id;
+ } else {
+ name = "PLANE";
+
+ /* plane scaler case: assign as a plane scaler */
+ /* find the plane that set the bit as scaler_user */
+ plane = drm_state->planes[i].ptr;
+
+ /*
+ * to enable/disable hq mode, add planes that are using scaler
+ * into this transaction
+ */
+ if (!plane) {
+ struct drm_plane_state *state;
+
+ /*
+ * GLK+ scalers don't have a HQ mode so it
+ * isn't necessary to change between HQ and dyn mode
+ * on those platforms.
+ */
+ if (DISPLAY_VER(dev_priv) >= 10)
+ continue;
+
+ plane = drm_plane_from_index(&dev_priv->drm, i);
+ state = drm_atomic_get_plane_state(drm_state, plane);
+ if (IS_ERR(state)) {
+ drm_dbg_kms(&dev_priv->drm,
+ "Failed to add [PLANE:%d] to drm_state\n",
+ plane->base.id);
+ return PTR_ERR(state);
+ }
+ }
+
+ intel_plane = to_intel_plane(plane);
+ idx = plane->base.id;
+
+ /* plane on different crtc cannot be a scaler user of this crtc */
+ if (drm_WARN_ON(&dev_priv->drm,
+ intel_plane->pipe != intel_crtc->pipe))
+ continue;
+
+ plane_state = intel_atomic_get_new_plane_state(intel_state,
+ intel_plane);
+ scaler_id = &plane_state->scaler_id;
+ }
+
+ ret = intel_atomic_setup_scaler(scaler_state, num_scalers_need,
+ intel_crtc, name, idx,
+ plane_state, scaler_id);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
static int glk_coef_tap(int i)
{
return i % 7;
diff --git a/drivers/gpu/drm/i915/display/skl_scaler.h b/drivers/gpu/drm/i915/display/skl_scaler.h
index 0097d5d08e10..f040f6ac061f 100644
--- a/drivers/gpu/drm/i915/display/skl_scaler.h
+++ b/drivers/gpu/drm/i915/display/skl_scaler.h
@@ -8,17 +8,22 @@
#include <linux/types.h>
enum drm_scaling_filter;
+enum pipe;
struct drm_i915_private;
+struct intel_crtc;
struct intel_crtc_state;
-struct intel_plane_state;
struct intel_plane;
-enum pipe;
+struct intel_plane_state;
int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
struct intel_plane_state *plane_state);
+int intel_atomic_setup_scalers(struct drm_i915_private *dev_priv,
+ struct intel_crtc *intel_crtc,
+ struct intel_crtc_state *crtc_state);
+
void skl_pfit_enable(const struct intel_crtc_state *crtc_state);
void skl_program_plane_scaler(struct intel_plane *plane,
@@ -26,4 +31,5 @@ void skl_program_plane_scaler(struct intel_plane *plane,
const struct intel_plane_state *plane_state);
void skl_detach_scalers(const struct intel_crtc_state *crtc_state);
void skl_scaler_disable(const struct intel_crtc_state *old_crtc_state);
+
#endif
--
2.39.2
More information about the Intel-gfx
mailing list